Brand: FlyRobo
Model: F-1701
Joystick Module measures position coordination on the X and Y axis by moving the thumbstick on the top of the module. the module also has a tactile switch and it is triggered by pressing the thumbstick down.
The X and Y axes are two 10k potentiometers that control 2D movement by generating analo..
₹32 ₹89
Brand: FlyRobo
Model: FR-01-323
This module is 5V to 3.3V TTL Bi-directional Logic Level Converter Module. 2-channel of high-voltage logic switch low voltage logic into unitary transformation.2 channels of high-voltage logic and low-voltage logic bilateral switching, This Module is compatible with the breadboard, it can be put on..
₹35 ₹48
Brand: FlyRobo
Model: FR-01-324
Tried connecting a 3.3V device to a 5V system, or the other way around? You should know the challenge it takes. the bi-directional logic level converter is a small device that safely steps down 5V signals to 3.3V AND steps up 3.3V to 5V at the same time. This level converter also works with 2.8V and..
₹29 ₹44
Brand: FlyRobo
Model: FR-01-339
The NE555 Pulse Module is a versatile signal generator based on the popular NE555 timer IC. It outputs stable square or rectangular waves with adjustable frequency and duty cycle. Ideal for applications such as motor speed control, LED dimming, and signal simulation. Onboard potentiometers allow eas..
₹139
Brand: FlyRobo
Model: FR-01-343
The ESP8266 WiFi Network Relay is a smart IoT switch module designed for remote device control.It uses the popular ESP8266 WiFi chip for reliable wireless connectivity and easy integration with smart home systems.This module lets you switch household appliances or other loads ON/OFF through your sma..
₹379
Brand: FlyRobo
Model: FR-01-344
The ZVS Tesla Coil Power Supply is a high-efficiency, tapless driver board designed for generating high voltage.It utilizes Zero Voltage Switching (ZVS) technology for improved energy transfer and reduced heat generation.Perfect for driving Tesla coils, induction heaters, and high-voltage experiment..
₹579
Brand: FlyRobo
Model: FR-01-345
The 5V Ultrasonic Humidifier Power Circuit Board is a compact, ready-to-use module for creating mist easily.It uses ultrasonic high-frequency oscillation to atomize water into ultra-fine particles.Perfect for DIY aroma diffusers, air humidifiers, and small indoor fountains.Low power operation at 5V ..
₹169
Brand: FlyRobo
Model: FR-01-377
The LM393 Photosensitive LDR Sensor Module is a light detection module that uses an LDR (Light Dependent Resistor) to sense ambient light levels. It features an LM393 voltage comparator to provide a stable digital output signal when the light intensity crosses a set threshold. The module includes an..
₹27
Brand: FlyRobo
Model: FR-01-379
This 5V Ultrasonic Humidifier Power Circuit Board is designed to efficiently drive mini ultrasonic mist makers.It generates high-frequency vibrations to atomize water into a fine cool mist.Compact and energy-saving, it works well with small desktop humidifiers and DIY aroma diffusers.Simply connect ..
₹129
Brand: FlyRobo
Model: FR-01-455
AVR 40 Pin development Board is ideal for learning AVR microcontrollers. This board contains requirements like LEDs, Switches, in-system programming, RS232 communication, etc. All Ports of the controller are accessible through a standard 10 pin FRC connector or simple header pins. Also, a 34*11 gene..
₹199 ₹399
Brand: FlyRobo
Model: FR-01-467
CJMCU-470 Si4703 FM Radio Tuner Evaluation Development Board is an evaluation board for the Si4703 FM tuner chip that includes an amp and a headphone jack, and that’s everything you need to get up and running!
It is also capable of detecting and processing both Radio Data Service (RDS) and Radio ..
₹246 ₹699
Brand: FlyRobo
Model: FR-01-517
This Eye Blink sensor senses the eyeblink using infrared. The Variation Across the eye will vary as per eye blink. If the eye is closed the output is high otherwise the output is low.
Feature and Specification:
EYE BLINK indication by LED
Instant output digital signal for directly Connec..
₹249 ₹900
Brand: FlyRobo
Model: FR-01-527
Multi-purpose Shield V1 is a learning board based on Arduino. No need for soldering and connection. Download directly the program to complete the experiment. It is multi-purpose and You can use them directly. There are extended ports on the shield to help you to complete another experiment.
Speci..
₹256 ₹707
Brand: FlyRobo
Model: FR-01-532
For microcontrollers without an analog-to-digital converter or when you want a higher-precision ADC, the ADS1115 provides 16-bit precision at 860 samples/second over I2C. The chip can be configured as 4 single-end input channels or two differential channels. ADC also includes a programmable gain amp..
₹157 ₹799
Brand: FlyRobo
Model: FR-01-540
HC-05 is a Bluetooth Transceiver Module and has TTL Output. HC-05 6 Pin Wireless Serial Bluetooth Module is a Bluetooth module for use with any microcontroller. It uses the UART protocol to make it easy to send and receive data wirelessly. This Bluetooth module is a completely qualified Bluetooth V..
₹299 ₹499
Brand: FlyRobo
Model: FR-01-541
HC-06 is the popular Bluetooth module. It’s very easy to add wireless serial connectivity for your device with this module. Examples for Arduino and other boards are available. Once you pair with other Bluetooth devices you work like with normal UART to exchange data.
This module has a built-in ..
₹439 ₹749
Brand: FlyRobo
Model: FR-01-543
This hm-10 Bluetooth module with BLE 4.0 support, Internal with logic level conversion circuit. No external 5V level to turn into a 3.3V level Power input with anti-anti-circuit. Avoid accidental power plug reversed.
Generally, users are using the HC-05 Bluetooth module but it doesn't suppor..
₹230 ₹399
Brand: FlyRobo
Model: FR-01-546
Vibration Sensor Module Vibration Switch SW-420 is based on the vibration sensor SW-420 and Comparator LM393 to detect if there is any vibration that beyond the threshold.
The threshold can be adjusted by the on-board potentiometer. When this no vibration, this module output logic LOW the signal..
₹38 ₹90
Brand: FlyRobo
Model: FR-01-550
The Non-Destructive MP3 Decoding Board with Self-Powered TF Card U Disk Decoded Player module is used for playing tracks in the MP3 format stored on a micro SD card or USB memory. Onboard 2W mono amplifier is connected to the speaker, 3.5mm gold plated headphone jack can connect with headphones or e..
₹110 ₹190
Brand: FlyRobo
Model: FR-01-637
This is a 433Mhz RF transmitter with a receiver kit for Arduino ARM MCU wireless. It can be used as a Remote control switch, electric doors, shutter doors, windows, remote control socket, remote control LED, remote control stereo, and alarm systems.
Specifications for Receiver module:
Oper..
₹73 ₹109
Brand: FlyRobo
Model: FR-01-638
The transmitter module is very simple to operate and offers low current consumption (typical. 11mA). Data can be supplied directly from a microprocessor or encoding device, thus keeping the component count down and ensuring a low hardware cost. This hybrid RF Transceiver Module provides a complete R..
₹175
Brand: FlyRobo
Model: FR-01-644
The sound module is the most sensitive to the environment sound intensity, commonly used to detect the intensity of the sound of the surroundings. When module in the intensity of the sound environment can not reach a set threshold, the OUT will output a high level, when the intensity of the sound fr..
₹50 ₹109
Brand: FlyRobo
Model: FR-01-646
Sound Detection Module Sensor for Intelligent Vehicle Compatible With Arduino is a Single channel signal output Sensor. The output is effective to the low-level sound signal with good fidelity, When there is sound, outputs low level and signal light.
sound detection module has two outputs:..
₹31 ₹125
Brand: FlyRobo
Model: FR-01-656
This is a simple but very useful module which uses a potential divider to reduce an input voltage by a factor of 5. The Voltage Detection Sensor Module 25V allows you to use the analog input of a microcontroller to monitor voltages much higher than it capable of sensing.
For example with a 0-5V a..
₹17 ₹89
Brand: FlyRobo
Model: FR-01-683
RC522 - RFID Reader /Writer with Cards Kit includes a 13.56MHz RF reader and writer module that uses an RC522 IC and two S50 RFID cards tag. The MF RC522 is an integrated transmission module for contactless communication at 13.56 MHz. RC522 supports ISO 14443A/MIFARE mode. RC522 - RFID Reader f..
₹68 ₹149
Brand: FlyRobo
Model: FR-01-685
RFID Card used for the Contactless transmission of data and supplies energy without battery. it works on the frequency of 125khz. These tags come with a unique 32-bit ID and are not re-programmable.
This is a basic VLF RFID Clamshell Card/Tag used for presence sensing, Access Control, etc. The c..
₹19 ₹77
Brand: FlyRobo
Model: FR-01-688
This is a 13.56MHz RFID IC Key Tag. The RFID technology is used for sensing and identifying tagged people and objects for access control, automation, and a whole range of different applications. Operating on a frequency of 13.56MHz, these tokens are all pre-programmed with unique ID numbers to commu..
₹16 ₹24
Brand: FlyRobo
Model: FR-01-691
This 12V Cabinet Door Electromagnetic Solenoid Lock can be used for locking sell-machine, storage shelf, file cabinet and etc. It is steady, durable, and energy-saving and had a long lifespan. In the anti-theft and shockproof design, the lock is better than other kinds of locks. After connecting th..
₹371 ₹499
Brand: FlyRobo
Model: FR-01-730
NE555 Frequency Adjustable Pulse generator Module utilizes the NE555 timer IC to generate pulses from about 4Hz to 1.3Khz. It generates a square wave signal used for experimental development or driving a stepper motor, it would be also a good choice for users learning& experiencing the analog RC cir..
₹48 ₹83
Brand: FlyRobo
Model: FR-01-735
This is a real-time clock module based on the NXP PCF8563T a programmable, I2C communicating up to 400KHz / 400Kb/S, high precision real-time clock chipset. More steady and precise than DS1302 or DS1307.
It offers multiple functions such as external programmable clock output, alarm, timer, featur..
₹248 ₹292
Brand: FlyRobo
Model: FR-01-736
The DS1307 real-time clock (RTC) IC is an 8 pin device using an I2C interface. The DS1307 is a low-power clock/calendar with 56 bytes of battery backup SRAM. The main advantage of RTC is that they have an arrangement of battery back up which keeps the clock/calendar running even if there is a power ..
₹40 ₹99
Brand: FlyRobo
Model: FR-01-737
DS3231 Module is a high precise I2C real-time clock Module. This module made using AT24C32 and DS3231 RTC EEPROM integrated. It also has a built-in comparator which monitors the status of VCC to detect power failures and to automatically switch to the backup power supply. AT24C32 provides 32,768 bit..
₹122 ₹299
Brand: FlyRobo
Model: FR-01-746
PAM8403 is a small digital amplifier chip, high-definition sound quality highlights the advantages of digital chips, the circuit using the most reasonable peripheral configuration, power supply filtering is upgraded to 470uf.
Note!!! Please make sure the power supply is not more than 5.5V and ple..
₹61 ₹95
Brand: FlyRobo
Model: FR-01-747
PAM8403 5V Two-Channel Stereo Audio Amplifier Module is based on PAM8403 which is a 3W+3W, class-D audio amplifier. Allowing it to achieve high-quality sound reproduction. The new filterless architecture allows the device to drive the speaker directly, requiring no low-pass output filters, thus savi..
₹19 ₹67
Brand: FlyRobo
Model: FR-01-801
A compact but high-powered DC-DC step-up (boost) power supply converter module. The module features a wide operating supply range and a power supply input voltage between 3.5 to 35V that can step-up this input voltage from 4V to 35V.
The module includes an integrated voltage meter that can m..
₹410 ₹699
Brand: FlyRobo
Model: FR-01-802
EM18 RFID Reader is a module that reads the ID information stored in RFID TAGS. This ID information is unique for every TAG which cannot be copied.
Features:
Can operate on LOW power
Communication parameter:9600bps
Integrated Antenna
Applications:
Robotics
Security systems..
₹296 ₹499
Brand: FlyRobo
Model: FR-01-803
This is MCP2515 CAN Bus Module with TJA1050 Transreceiver which can adopt CAN controller MCP2515 and TJA1050 high-speed CAN transceiver. Onboard independent key. Microchip MCP2515 independent CAN protocol controller, support CAN V2.0B regulation.
This is easy to use CAN bus module controlled via..
₹91 ₹379
Brand: FlyRobo
Model: FR-01-804
The ENC28J60 is a stand-alone Ethernet controller with an industry-standard Serial Peripheral Interface. It is designed to serve as an Ethernet network interface for any controller equipped with SPI.
ENC28J60 Ethernet Module utilizes the Microchip ENC28J60 Stand-Alone Ethernet Controller IC ..
₹320 ₹499
Brand: FlyRobo
Model: FR-01-833
This is a great little RFID Reader Module from Innovations, similar to the ID models (the difference being no silicone protection on the back). If you need an inexpensive way to get started with RFID, this is a great little module.
Just power the module, and it will read any RFID card within ran..
₹399
Brand: FlyRobo
Model: FR-01-834
This is CJMCU 9900 APDS-9900 Digital Proximity And Ambient Light Sensor For Arduino. The APDS-9900 provides digital ambient light sensing (ALS), IR LED, and a complete proximity detection system in a single 8 pin package. The proximity function offers plug and plays detection to 100 mm (without fron..
₹169 ₹198
Brand: FlyRobo
Model: FR-01-842
HC12 Module is based on the SI4463 EZRadioPro family chip. This module offers a wireless data transmission and reception range of approximately 1 km in the open air. It’s a low power radio chip that is ultra-easy to use.
This module has an onboard STM8S003F3P6 MCU which is communicating with the ..
₹201 ₹699
Brand: FlyRobo
Model: FR-01-844
IRF520 MOSFET Driver Module is a breakout board for the IFR520 MOSFET transistor. The module is designed to switch heavy DC loads from a single digital pin of your microcontroller.
Here is a simple breakout board for the IRF520 Mosfet. Easy hookup to your Arduino or another 3-5v microcontroller. ..
₹36 ₹99
Brand: FlyRobo
Model: FR-01-848
ACS712 5A Range Current Sensor Module consists of a precise, low-offset, linear Hall circuit with a copper conduction path located near the surface of the die. Applied current flowing through this copper conduction path generates a magnetic field in which the Hall IC converts into a proportional vol..
₹74 ₹148
Brand: FlyRobo
Model: FR-01-849
ACS712 20A Range Current Sensor Module consists of a precise, low-offset, linear Hall circuit with a copper conduction path located near the surface of the die. Applied current flowing through this copper conduction path generates a magnetic field in which the Hall IC converts into a proportional vo..
₹86 ₹169
Brand: FlyRobo
Model: FR-01-850
ACS712 30ARange Current Sensor Module consists of a precise, low-offset, linear Hall circuit with a copper conduction path located near the surface of the die. Applied current flowing through this copper conduction path generates a magnetic field in which the Hall IC converts into a proportional vol..
₹71 ₹179
Brand: FlyRobo
Model: FR-01-880
This is RF Transmitter Receiver Module 315MHz Wireless Link Kit For Arduino. This wireless transmitter and receiver pair operates at 315Mhz. They can easily fit into a breadboard and work well with microcontrollers to create a very simple wireleReceiving frequency (MHz)ss data link. Since these are ..
₹73 ₹79
Brand: FlyRobo
Model: FR-01-892
The TM1638 Button Digital LED Display Module is used in chip TM1638, a collection of these three common MCU peripheral circuit, the biggest feature just takes three microcontroller IO port to drive, do not need to scan display and key scanning microcontroller intervention, only need to read the rele..
₹143 ₹273
Brand: FlyRobo
Model: FR-01-894
MT8870 DTMF Decoder Module is ideally suited to adding dual-tone multi-frequency (DTMF) decoding to your project. This detection module interprets the incoming tone and produces a coded output that can be connected to all manner of microcontrollers.
DTMF is commonly found in touch-tone devices su..
₹105 ₹147
Brand: FlyRobo
Model: FR-01-895
The TCS34725 device provides digital return values for red, green, blue (RGB), and bright light sensing. Color-sensitive photodiode integrated chip and localized infrared light-shielding filter minimize the infrared spectrum of the incident light, making color management more accurate. The high se..
₹185 ₹389
Brand: FlyRobo
Model: FR-01-896
Features:
Operating Voltage: 4.5V-5.5V
A memory mapping and multi-function LED controller driver
Max display segment: 16 ×8(128 patterns), with a 13 ×3 matrix key scan circuit
Suitable for multiple LED applications because of the software configuration features
Compatible with most Mic..
₹149 ₹199
Brand: FlyRobo
Model: FR-01-898
This is a breakout board/Prototype Board for PCF8591 IC. The PCF8591 is a single-chip, single‑supply low‑power 8‑bit CMOS data acquisition device with four analog inputs, one analog output, and a serial I²C‑bus interface. Three address pins A0, A1, and A2 are used for programming the hardware addres..
₹174
Brand: FlyRobo
Model: FR-01-901
Features:
Voltage: 6 V (Max)
Current: 100mA (Max)
Size: 7cm X 7cm
Application:
To charge cell phones
For home lighting
For DIY solar power toys
Suitable for solar powered water pump, small solar power system, etc.
..
₹149
Brand: FlyRobo
Model: FR-01-952
CP2102 Module is CP2102 based on highly integrated single-chip USB to TTL bridge IC. it requires the very minimum external components. The module has a built-in USB2.0 full-speed function controller, USB transceiver, crystal oscillator, EEPROM, and asynchronous serial data bus (UART). It supports a ..
₹154 ₹179
Brand: FlyRobo
Model: FR-01-954
Fixed 5V Output Boost Regulator (step-up regulator) Module with standard USB Connector.
Accepts Input voltage from 0.9V to up to 5V.
Features:
On-board CE8301 Chip
Input voltage: 0.9V-5V DC
PFM Control DC-DC Converter
Transfer efficiency: 96%(max)
With USB port
With worki..
₹36 ₹99
Brand: FlyRobo
Model: FR-01-955
Features:
1. Place it directly on a breadboard with red and blue lines.
2. With DC-005 round hole plug input, input voltage 6.5-12v, compatible with most power adapters.
3. With USB input, it can be directly connected to computer USB or 5V power supply.
4. With Micro USB input, most mobi..
₹60 ₹99
Brand: FlyRobo
Model: FR-01-956
The Mini360 buck converter step down voltage regulator board is designed for use with RC airplanes, quadcopters, drones, RC cars, Arduino and other micro-controllers, and other DIY electronics needing an ultra-miniature, lightweight step-down voltage regulator.
It uses an integrally molded power ..
₹34 ₹84
Brand: FlyRobo
Model: FR-01-957
Features:
Special power module for breadboard, compatible with 5V and 3.3V.
Apply to the MB102 breadboard, very useful for Arduino breadboard projects.
DC 6.5-12V or USB power supply the input voltage.
The output voltage can be switched between 3.3V and 5V.
Two-way independent control ..
₹50 ₹69
Brand: FlyRobo
Model: FR-01-977
TEA5767 Stereo FM Radio Module with Detachable Antenna is made using TEA5767, a single-chip electronically tuned stereo FM radio for low voltage applications. It has fully integrated Intermediate Frequency (IF) selectivity and FM demodulator.
The radio is completely adjustment-free and is very ea..
₹430 ₹547
Brand: FlyRobo
Model: FR-01-978
This 3.3V VCC Adapter Board for NRF24L01 Wireless Transceiver Module enables you to use NRF24l01 type transceivers on 5V systems like Arduino.
It regulates the 3.3V input to 1.9~3.6V DC and incorporates bypass capacitors for reliable operation. The NRF24L01 utilizes Enhanced ShockBurst (ESB) prot..
₹30 ₹58
Brand: FlyRobo
Model: FR-01-980
The four spindles on the ICSH044A Blackberry Trackball Breakout Board 360 Degree Trajectory Ball Module Hall Effect Sensor have a tiny circular magnet in the end; each of these is paired with an SMD hall effect sensor, which is used to measure up, down, left, and right movements of the trackball.
..
₹350 ₹589
Brand: FlyRobo
Model: FR-01-988
USB Charging Discharge Resistance Current Detection Load Tester can easily test the mobile power charging treasure, cell phone charger, USB power output current is standard, as long as the resistance USB port to the above line.
And can carry on an aging test to mobile power and USB power adapter..
₹48 ₹129
Brand: FlyRobo
Model: FR-01-992
RS422 interface, two-way communication. B Y Z A ultra far transmission 1000 meters. The module has ESD 15KV protection. Onboard to increase the limit of 10 ohms current limiting current protection. Module with TVS diode. Anti lightning, peak voltage. The module has 120-ohm termination resistors, whi..
₹142 ₹299
Brand: FlyRobo
Model: FR-05-200
TEC1-12715 Thermoelectric Cooler Peltier Module is Precise temperature control, High effective cooling, and efficiency, Compact structure, small in size, light in weight, high Performance, No moving parts, no noise, and solid-state. It is the simple application of the Peltier Thermoelectric Effect. ..
₹309 ₹449
Brand: FlyRobo
Model: FR-05-201
Thermoelectric coolers (TEC or Peltier) create a temperature differential on each side. One side gets hot and the other side gets cool. Therefore, they can be used to either warm something up or cool something down, depending on which side you use. You can also take advantage of a temperature differ..
₹219
Brand: FlyRobo
Model: FR-05-207
DC 12V KK-P30/25 15KG Lifting Solenoid Electromagnet consists of an iron core and a coil to attract magnetic substances, using the magnetic action induced by electric current, only while the current is applied. This compact functional device offers high power with high reliability. The structure and..
₹399
Brand: FlyRobo
Model: FR-05-208
This DC 12V KK-P20/15 2.5KG Lifting Solenoid Electromagnet consists of an iron core and a coil to attract magnetic substances, using the magnetic action induced by electric current, only while the current is applied. This compact functional device offers high power with high reliability. The structu..
₹195 ₹199
Brand: FlyRobo
Model: FR-05-230
12V DC Solenoid Water Air Valve Switch (Normally Closed) – 1/2″ controls the flow of fluid (liquid or air) and acts as a valve between high-pressure fluid! This liquid valve would make a great addition to your robotic gardening project. There are two ½” (Nominal NPT) outlets. Normally, the valve is ..
₹279 ₹409
Brand: FlyRobo
Model: FR-05-231
DC 12V 1A Push-Pull Solenoid Electromagnet, 10mm 5N Push-Pull Type, open frame type, linear motion, plunger spring return, open coil form, DC electron magnet. Used widely in home appliances, vending machines, a game machine, auto door lock.
This DC 12V 10mm 5N Push-Pull Solenoid Electromagnet c..
₹289 ₹499
Brand: FlyRobo
Model: FR-05-799
The Red 0.36 inch Digital Three-Wire DC Voltmeter is a compact and reliable voltage monitoring tool.Featuring a bright red LED display, it ensures clear readings even in low-light conditions.Designed to measure DC voltages typically from 3V to 30V with high accuracy.Its three-wire configuration allo..
₹59
Brand: FlyRobo
Model: FR-05-808
The Blue 0.36 inch Digital Three-Wire DC Voltmeter with Case is a compact and reliable voltage display module. It features a bright blue LED display for clear visibility even in low light conditions. The three-wire design allows for independent power and measurement, ensuring accurate readings. It c..
₹61
Brand: FlyRobo
Model: FR-07-012
AMS1117-3.3 LDO 800MA DC 5V to 3.3V Step-Down Power Supply Module is capable of supplying very stable 3.3V-5V DC when supplied with 4.5V-15V DC. It is capable of altering the output of the power supply before supplying it to the load so as to deliver the specified power to your load.
The products..
₹23 ₹49
Brand: FlyRobo
Model: FR-07-016
This power supply module is based on the AMS1117 3.3V regulator. It is capable of regulating a wide range of input voltage (4.0 to 12V) down to a fixed 3.3V output at up to 1A (Vin = 4.5V). Standard 0.1″ header pins provide a means of connecting to its input and output terminals.
These header pin..
₹13 ₹34
Brand: FlyRobo
Model: FR-07-021
AMS1117 5V Step Down Power Supply Module is capable of regulating a wide range of input voltage 6.0 to 12V down to a fixed 5V output at up to 1A. Headers pins provide a means of connecting to its input and output terminals.
Features:
Chip: AMS1117.
It has an onboard power indicator to in..
₹19 ₹39
Brand: FlyRobo
Model: FR-07-300
This power supply is an automatic step-up/down power supply module. When the output voltage remains constant, the input voltage is equal to the bottom, up or the output voltage. For example, to set output as 12V, the input voltage between 5 ~ 32V output voltage is always 12V. It can achieve continuo..
₹688 ₹1,449
Brand: FlyRobo
Model: FR-07-527
The CA-1235 Adjustable Power Module is a DC-DC step-down regulator that converts 15V input to selectable output voltages of 1.5V, 1.8V, 2.5V, 3.3V, and 5V. It delivers a stable 2-3A current, making it ideal for powering microcontrollers, sensors, and low-power devices. Featuring high efficiency and ..
₹39
Brand: FlyRobo
Model: FR-07-772
The HU-M28W Desktop PC Power Adapter Board is a compact and efficient power conversion module designed for desktop PCs and embedded systems. It supports wide voltage inputs and provides stable ATX power outputs for various components. Featuring multiple output ports, it ensures reliable power distri..
₹269 ₹319
Brand: FlyRobo
Model: FR-07-945
The CA-901 General LCD TV Switch Power Supply Module is designed for stable and efficient power conversion. It supports a wide input voltage range of 12V to 24V, making it versatile for various LCD TV models. This module ensures reliable performance with over-voltage and short-circuit protection. Co..
₹124 ₹189
Brand: FlyRobo
Model: FR-07-946
The IOBIT V1.0 Micro:bit Expansion Board is a versatile adapter designed to enhance the capabilities of the BBC Micro:bit. It features multiple input/output ports, including servo and motor connectors, making it ideal for robotics and interactive projects. The board supports external power input for..
₹399
Brand: FlyRobo
Model: FR-07-947
The IOBIT V2.0 Micro:bit Expansion Board is a versatile expansion module designed for the BBC Micro:bit, providing enhanced connectivity and functionality. It features multiple I/O ports, including servo and motor connections, making it ideal for robotics and DIY projects. With an onboard power mana..
₹489
Brand: FlyRobo
Model: FR-07-948
The 315MHz STX882 Wireless Transmission Module is a high-performance, low-power RF transmitter designed for remote control and wireless data transmission applications. Operating at 315MHz, it provides stable signal transmission with a long-range capability. It supports ASK (Amplitude Shift Keying) m..
₹119 ₹139
Brand: FlyRobo
Model: FR-07-949
The 433MHz STX882 Wireless Transmission Remote Control Module is a compact and high-performance RF transmitter designed for wireless data communication. It operates at 433MHz with low power consumption and high stability, making it ideal for remote control applications. The module supports ASK (Ampl..
₹119 ₹149
Brand: FlyRobo
Model: FRC-01-686
RFID Card used for Contactless transmission of data and supplies energy without battery. it works on the frequency of 125khz.
Package Content:
10 x RFID Card tag..
₹175
Showing 1 to 82 of 82 (1 Pages)