Brand: FlyRobo
Model: FR-07-078
PCB Edge Mountable - SMA-Female RF connector for 1.6mm Thick PCB. Perfect for prototyping with the GPS and Cellular devices that require an antenna connection. These connectors have a female signal pin and will correctly mate with the original SMA- Male type antennas.
Features:
F Connector,..
₹24
Brand: FlyRobo
Model: FR-01-941
This is Double-ended Crocodile/Alligator Clips Roach Clips Electrical DIY Test Leads. It is an insulation-covered clip connected to the wire from both ends.Alligator clips can also be used as miniature clamps to hold parts together. In addition, it is also useful for gluing and wires together f..
₹129
Brand: FlyRobo
Model: FR-07-203
This is PLASTIC TIES 100 MM (100pcs/Bag), 100mm long black nylon cable ties in 2.5mm width, ideal for general cable bundling, etc. Bag of 100 cable ties.A reusable cable tie is a great way to keep your cables neatly organized, untangled and out of the way.These reusable ties can be used over and ove..
₹45
Brand: FlyRobo
Model: FR-07-073
These modules provide a quick visual reference of the charge status (capacity) of 18650 Lithium-ion batteries, as well as other lithium batteries with a maximum voltage of 3.7volts per cell.
This battery capacity display module is perfect for DIY power supplies, battery chargers, RC and electric ..
₹108 ₹149
Brand: FlyRobo
Model: FR-06-606
12V 7530 DC Blower Cooling Fan is a powerful fan and made of premium materials. It maintains the temperature of the extruder, which results in good heat dispersion and wonderful performance. Excellent for cooling heat sinks on hot ends, prints, or other cooling needs.
The cooling fan operates on ..
₹149
Brand: FlyRobo
Model: FR-07-700
12V Electric Pressure Solar Water Heater Solenoid Valve Normally Closed 1/2" controls the flow of fluid plus air and acts as a valve between high-pressure water or any fluid!
The valve works with a solenoid coil which operates electronically with DC 12 volt supply. As it is normally closed assem..
₹399
Brand: FlyRobo
Model: FR-07-701
150mm/6Inch LCD Digital Electronic Carbon Fiber Vernier Caliper Gauge Micrometer is a 15 cm or 6-inch low-cost vernier caliper which is best for two-way measurement with zero setting functionality in any position. It is an ideal tool for a broad range of industrial and automotive applications.Featur..
₹499
Brand: FlyRobo
Model: FR-07-610
This is a 15KV Inverter Generator Ignition Coil Module DIY Kit, not assembled, with one PCB board. This product is a booster coil production suite, the circuit is simple and reliable, with professional line drawings, electronic research convenience.
Features:
It is convenient to light up ci..
₹249
Brand: FlyRobo
Model: FR-07-612
15W Mini Tesla Coil Plasma Speaker DIY Kit can produce high temperature and high-pressure plasma, which can sing, ignition, wireless transmission, and light fluorescent lamp. It has a wonderful arc. It is a very interesting small production of scientific experiments. This is a DIY Tesla coil Kit par..
₹399
Brand: FlyRobo
Model: FR-07-608
This is 16 Interesting Sounds Music Box Electronic Production DIY Kit. The pad is enlarged and sprayed with tin, it is easy to solder, and the solder pad is not easy to fall off many times.
Features:
The impedance is more stable and reliable
The pin header port is an external code port (c..
₹299
Brand: FlyRobo
Model: FR-07-408
Lithium-Ion charge protection circuit comes with over-charge, over-discharge, over-current and short circuit protection. MOS transistor can control the battery charge and discharge, Built-in three-stage over-current detection circuit, for a variety of various shapes 3.7 V lithium-Ion batteries.hx-2s..
₹111 ₹223
Brand: FlyRobo
Model: FR-07-438
These Battery Cell Spacer Holders are made for 18650 Li-ion batteries. It is made of flame retardant ABS+PC materials. The holders have features like high-temperature resistance and crake proof. Every Single battery cell needs 2 Spacer for one up and one down buy it accordingly. Ther..
₹17