Brand: FlyRobo
Model: FR-06-602
12 V 4010 Cooling Fan is a small but powerful fan. It maintains the temperature of the extruder, which results in good heat dispersion and wonderful performance. The cooling fan operates on a 12V DC power supply which can be easily powered from the RPI board. It has a 2 pin connector to easily ..
₹99
Brand: FlyRobo
Model: FR-06-601
12 V 6010 Cooling Fan is a small but powerful fan. It maintains the temperature of the extruder, which results in good heat dispersion and wonderful performance. The cooling fan operates on a 12V DC power supply which can be easily powered from the RPI board. It has a 2 pin connector to easily ..
₹99
Brand: FlyRobo
Model: FR-06-604
12V 3010 Cooling Fan is a small but powerful fan. It maintains the temperature of the extruder, which results in good heat dispersion and wonderful performance. The cooling fan operates on a 12V DC power supply which can be easily powered from the RPI board. It has a 2 pin connector to eas..
₹99
Brand: FlyRobo
Model: FR-06-606
12V 7530 DC Blower Cooling Fan is a powerful fan and made of premium materials. It maintains the temperature of the extruder, which results in good heat dispersion and wonderful performance. Excellent for cooling heat sinks on hot ends, prints, or other cooling needs.The cooling fan operates on a 12..
₹149
Brand: FlyRobo
Model: FR-06-234
This 20 Tooth 5mm Bore GT2 Timing Idler Aluminum Pulley works with GT2 6mm wide timing belt; it will work perfectly with GT2 pulley-belt sets we are selling on our site. This idler is a good match for 20T GT2 driving Timing Belt Pulley.
This pulley has 20 teeth and a 5mm inner bore. Two set sc..
₹99
Brand: FlyRobo
Model: FR-06-232
This GT2 Timing Idler Aluminum Pulley works with GT2 6mm wide timing belt; it will work perfectly with GT2 pulley-belt sets we are selling on our site. This idler is a good match for 20T GT2 driving Timing Belt Pulley.
Widely used in milling machine, 3D Printer, gear shaper, drilling machine, ..
₹119
Brand: FlyRobo
Model: FR-06-221
The RAMPS (RepRap Arduino Mega Shield) is an all-in-one design to fit the necessary components for a 3D printer into one plug in shield for an Arduino MEGA. The plug in shield design includes plug in stepper drivers and extruder control electronics sockets for easy service, part replacement, upgrade..
₹549 ₹599
Brand: FlyRobo
Model: FR-06-205
M6X26 1.75 Print Extruder Pipes For 3D Printer.Features:Material: Stainless SteelInner diameter: 2mmOuter thread: M6Suitable for 1.75 FilamentApplication: 3D printer extruderPackage included:1 x 3D printer extruder pipes..
₹259 ₹299
Brand: FlyRobo
Model: FR-06-240
The PCB heat bed is a great addition to your 3D printer to help your printing platform to be a heated surface perfect for minimizing warping of larger prints. The heating element is on the bottom side. The heating is done by long traces of copper. The top side is solid copper to keep the PCB flat en..
₹519 ₹577
Brand: FlyRobo
Model: FR-06-603
5V 3007 Cooling Fan is a small but powerful fan. It maintains the temperature of the extruder, which results in good heat dispersion and wonderful performance. The cooling fan operates on a 5V DC power supply which can be easily powered from the RPI board. It has a 2 pin JST connector to easily..
₹176
Brand: FlyRobo
Model: FR-06-605
5V 3010 Cooling Fan is a small but powerful fan. It maintains the temperature of the extruder, which results in good heat dispersion and wonderful performance. This fan can be directly connected to Raspberry Pi pins 4 and 6.
The cooling fan operates on a 5V DC power supply which can be easily power..
₹125
Brand: FlyRobo
Model: FR-06-226
The 8mm Thread 2mm Pitch 150mm Trapezoidal 4 Start Lead Screw with Copper Nut used for general machine tools such as 3D printing, CNC ROBOTICS, etc
It has good wear resistance and strength, high accuracy, hard to rust, and has good performances due to low friction coefficients and long usage spans...
₹239