Mini Heatbed MOS High Power MOSFET Expansion Module has a mini appearance, compact design, with more powerful heating, to solve the problem of current load due to excessive hot bed power, under normal heat dissipation, the module measured I (Max) = 30A can stand long-term work, please note that the ..
This is MK7 MK8 Heated Aluminum Block mainly used for 3D printers. It works perfectly with the nozzle and nozzle throat Inner hole for set screws: M6 and M3 (heat pipe and thermocouple).
Features:
Type: Heated Block
Material: Aluminum
Heater Mounting Hole: 6mm diameter
Thermocouple ..
MXD1230 12mm 650nm 5mW Red Line Laser Module with an adjustable focus point. It can be used to connect diode tubes for multiple uses.
Features:
Laser Type: Red CROSSLINE Laser
Easy to install, durable, and portable
The Focus line’s Intensity can be adjusted with the help of a lens ring ..
SK10 10mm Linear Bearing Rail Support is usable with any 10mm linear guide, you can simply slide the rail through, then tighten the clamp screw at the top to fix it in place.
If you need to disassemble or otherwise repair your robot or machine, it's easy to open up the clamp and remove the rail.
..
SK12 12mm Linear Bearing Rail Support is usable with any 12mm linear guide, you can simply slide the rail through, then tighten the clamp screw at the top to fix it in place.
It can be used up to 6mm diameter bolts to attach them. If you need to disassemble or otherwise repair your robot or machi..
SK13 13mm Linear Bearing Rail Support is usable with any 13mm linear guide, you can simply slide the rail through, then tighten the clamp screw at the top to fix it in place.
It can be used up to 6mm diameter bolts to attach them. If you need to disassemble or otherwise repair your robot or machi..
SK8 8mm Linear Bearing Rail Support is usable with any 8mm linear guide, you can simply slide the rail through, then tighten the clamp screw at the top to fix it in place.
It can be used up to 6mm diameter bolts to attach them. If you need to disassemble or otherwise repair your robot or machine,..
This is T8 Anti-backlash Spring Loaded Nut For 8mm Threaded Rod Lead Screw. It is used with an 8mm Lead Screw in general machine tools such as 3D printing, CNC, etc. It is made from brass and is very reliable in linear motion applications. (2*2mm)
These nuts are mainly used for high transmission,..
This is T8 Anti-backlash Spring Loaded Nut For 8mm Threaded Rod Lead Screw. It is used with an 8mm Lead Screw in general machine tools such as 3D printing, CNC, etc. It is made from brass and is very reliable in linear motion applications. (2*8mm)
This will provide easy to install and convenient ..
The TF Thermal Fuse RY-192°C 10A 250V is a reliable safety component designed to protect electrical circuits from overheating. With a current rating of 10A and voltage tolerance up to 250V, it ensures robust performance in diverse applications.
Its compact size makes it easy to integrate into var..
Titan E3D 1.75mm Extruder Kit works perfectly with your installed E3D hotend, and will allow users to upgrade their 3D printer's entire extrusion system.
Features:
Type: V6 Bowden Extruder
High-quality Titan extruder
Very easy to upgrade your printer.
Suitable use for Remote and Short..
TL-Smoother V1.0 is an addon module for 3D printer stepper motor drivers. It provides flyback diodes for the motor outputs so that they are also protected against induction voltages in the unpowered state of the driver. It can eliminate the uneven signal wave at low speed so as to achieve the effect..