Brand: FlyRobo
SKU: 4480
The DFRobot Gravity Crash Sensor is a robust mechanical microswitch designed to detect physical collisions and limit positions in your DIY electronics. Operating as a simple digital push button with a roller lever, it provides an immediate high or low signal upon impact, making it perfect for preven..
₹248
Brand: FlyRobo
SKU: 61
The A3144 Hall Effect Sensor Magnet Detector Switch for Arduino is a switch that will turn on/off in the presence of a magnetic field. If no magnetic field is present, the signal line of the sensor is HIGH. If a magnetic field is presented to the sensor, the signal line goes LOW, at the same time th..
₹28 ₹79
Brand: FlyRobo
SKU: 4477
The KEYES Digital Knock Sensor Module is a highly responsive vibration and impact detection board perfect for your interactive DIY electronics. Featuring a sensitive spring-based mechanism, this sensor instantly registers physical taps, knocks, or strong vibrations, outputting a clear digital signal..
₹183
Brand: FlyRobo
SKU: 4502
The Keyes KY-031 Digital Knock Sensor Module is a highly responsive vibration and impact detection sensor perfect for your next interactive DIY project. Designed around a spring-based vibration switch, this module instantly detects physical knocks or taps and outputs a clean digital signal, making i..
₹186
Brand: FlyRobo
SKU: 4481
The LD2410B is a high-sensitivity 24GHz human presence status sensing module that utilizes Frequency Modulated Continuous Wave (FMCW) technology to detect moving, standing, and stationary human bodies. Unlike traditional PIR sensors that rely on heat signatures and often fail when a person is still,..
₹548
Brand: FlyRobo
SKU: 4499
The MAX30100 Heart Rate and Pulse Oximeter Sensor is an advanced biometric module designed for monitoring cardiovascular health. It integrates two LEDs (one red and one infrared), a highly sensitive photodetector, optimized optics, and low-noise analog signal processing to deliver accurate pulse oxi..
₹133
Brand: FlyRobo
SKU: 3088
The Reflective Photoelectric Switch CNY70 is a compact sensor module designed for detecting the presence or absence of an object. It operates by emitting infrared light and measuring the amount of light reflected. With its integrated infrared LED and phototransistor, it provides accurate detection c..
₹39 ₹49
Brand: FlyRobo
SKU: 975
This air pressure sensor is suitable for biomedical, meteorology, and other fields. The core part is the pressure sensor chip which is made by the MEMS pressure technology.
Features:
Solid-state
MEMS technology
High reliability
low cost
Measuring and controlling media width
Wide t..
₹107 ₹499
Brand: FlyRobo
SKU: 701
This is YF-S201 Water Flow Measurement Sensor in black color. This sensor sits in line with your water line and contains a pinwheel sensor to measure how much liquid has moved through it. There's an integrated magnetic hall effect sensor that outputs an electrical pulse with every revolution. The ha..
₹184 ₹269
Brand: FlyRobo
SKU: 903
This is a 1 Channel SW-520D Tilt Vibration Sensor Module. Using a highly sensitive point of view as a sensor switch SW-520D. The comparator output signal is clean, good waveform, driving ability, more than 15mA. Switch module output depends on the angle of the switch is turned on and off, when the a..
₹45 ₹169
Brand: FlyRobo
SKU: 770
This load cell (sometimes called a pressure gauge) can translate up to 10kg of stress (force) into an electric signal. Each load cell can measure the electrical resistance that changes in response to, and proportionality of, the strain (e.g. pressure or force) applied to the pub.
With this gauge..
₹125 ₹329
Brand: FlyRobo
SKU: 432
The Keypad 4x3 features a total of 12 buttons in Matrix form. This is a membrane keypad with no moving parts. A female 7-pin berg connector is provided for interfacing it with your microcontroller circuits. Convenient adhesive backing provides a simple way to mount the keypad in a variety of applica..
₹45 ₹95
