Menu
Your Cart

Other

Discover a variety of other hardware, structural parts, and specialized robotic accessories.
GY-2561 TSL2561 Light Intensity/Luminosity Sensor Module
-7 % Out Of Stock
Brand: FlyRobo SKU: 1135
The TSL2561 Luminosity Sensor Breakout is a sophisticated light sensor that has a flat response across most of the visible spectrum. Unlike simpler sensors, the TSL2561 measures both infrared and visible light to better approximate the response of the human eye.  The TSL2561 is capable of direct ..
₹435 ₹470
GY-31 TCS3200 Color Sensor Recognition Module For Arduino
-31 % Out Of Stock
Brand: FlyRobo SKU: 949
The TCS3200 Color Recognition Sensor Module uses a high-quality light sensor allowing you to sense any color through a combination of Red, Green, and Blue. The module provides all of the pins of the TCS3200 on convenient 0.1″ headers – ideal for use with PCBs, breadboard, or stripboard. Four whit..
₹414 ₹599
Brand: FlyRobo SKU: 3184
The Digital Sound Sensor GY-SPH0645LM4H is a high-performance audio module designed for accurate sound detection and processing. It features an onboard MEMS microphone that converts sound waves into digital data, ensuring precise and reliable audio capture. The sensor operates on a low-power mode, m..
₹724
HB100 Microwave Doppler Radar Wireless Motion Sensor
-14 %
Brand: FlyRobo SKU: 954
HB100 Microwave Motion Sensor is an X-Band Bi-Static Doppler transceiver module. It has a built-in Dielectric Resonator Oscillator (DRO) and a pair of Microstrip patch antenna array, making it ideal for usage in motion detection equipment. This module is ideal for alarms, motion detectors, lighti..
₹287 ₹334
Brand: FlyRobo SKU: 951
The Heart Rate Monitor Kit with AD8232 ECG sensor module Kit For Arduino is a cost-effective board use to measure the electrical activity of the heart. This electrical activity can be chart as an ECG or Electrocardiogram and output as an analog reading. ECGs can be extremely noisy, the AD8232 Sin..
₹897
IIC/I2C Serial Interface Adapter Module - i2c module for display
-47 %
Brand: FlyRobo SKU: 662
IIC/I2C Interface Adapter Module is used for 16×2 LCD Display. It uses the PCF8574T IC chip which converts I2C serial data to parallel data for the LCD display. Also, this interface module simplifies connecting an Arduino to a 16×2 Liquid Crystal display using only 4 wires. Specifications and Fea..
₹50 ₹95
KQ-330 Power Line Carrier Communication Module
-30 % Out Of Stock
Brand: FlyRobo SKU: 963
KQ-330 Power Line Carrier module is designed to communicate between two devices through a Power line (e.g 220V power line) without any extra components. The PLC can transmit the broadband data via the power lines, which are suitable for either residential (at-home) or commercial (offices, apartme..
₹1,202 ₹1,709
KY-017 Tilt Mercury Sensor Module
-31 % Out of Stock
(Restock: 18-11-2026 to 22-11-2026)
Brand: FlyRobo SKU: 1111
KY-017 Mercury Sensor Module consists of a mercury switch, a 680Ω resistor, and a LED that will light up when tilt is detected. The mercury ball will open/close the circuit when the module is rotated. The Mercury switch module and digital 13 interfaces come with LED to build a simple circuit, the..
₹34 ₹49
LED Dimming PWM Control Capacitive Touch Dimmer Switch Module
-50 %
Brand: FlyRobo SKU: 957
  The default function of the capacitor touch dimmer is a switch, dimming, with brightness memories LED touch dimming. It will light slowly when turning on the lights, and become dark slowly when turn off, which effectively avoids the stimulation to eyes. The lamp brightness can be adjusted by..
₹55 ₹109
LM393 Linear Hall Effect Sensor Module ( 4pin)
Out Of Stock
Brand: FlyRobo SKU: 3649
The LM393 Linear Hall Effect Sensor Module is a versatile sensor designed to detect magnetic field variations. It features a linear Hall Effect sensor capable of measuring the strength and polarity of magnetic fields. The onboard LM393 comparator ensures accurate digital output signals for threshold..
₹37
LM393 Photosensitive LDR Sensor Module (4pin)
-61 %
Brand: FlyRobo SKU: 714
The LDR Sensor Module is used to detect the presence of light / measuring the intensity of light. The output of the module goes high in the presence of light and it becomes low in the absence of light. The sensitivity of signal detection can be adjusted using a potentiometer. Features : Usi..
₹35 ₹89
Brand: FlyRobo SKU: 3915
The LM393 Photosensitive LDR Sensor Module is a light detection module that uses an LDR (Light Dependent Resistor) to sense ambient light levels. It features an LM393 voltage comparator to provide a stable digital output signal when the light intensity crosses a set threshold. The module includes an..
₹36
Showing 49 to 60 of 114 (10 Pages)

The product is currently Out-of-Stock. Enter your email address below and we will notify you as soon as the product is available.

Name
Email
Phone
Comments