Brand: FlyRobo
Model: FR-01-619
This HC-SR04-Ultrasonic Distance Measuring Sensor is a very popular sensor which is found in many applications where it requires to measure distance and detect the objects.
The module has two eyes like projects in the front which form the Ultrasonic transmitter and Receiver. The HC-SR04 ultrason..
₹57 ₹89
Brand: FlyRobo
Model: FR-01-695
This 25mm Ultrasonic Humidifier Moisture Film Humidification Piezoelectric Transmitter module works on the principle of cavitation produced by sound waves. As sound waves contain compression and rarefaction. Due to extremely rapid movement, water droplets can no longer sustain their liquid state and..
₹58 ₹149
Brand: FlyRobo
Model: FR-07-191
The 114mm 1-meter Thin Heat Shrink Sleeve is an essential accessory for protecting lithium cell packs. This heat shrink sleeve is designed for a snug fit and offers excellent insulation and safeguards against short circuits. Its durable, thin-walled construction provides robust protection without ad..
₹58 ₹59
Brand: FlyRobo
Model: FR-01-805
HG7881 Two-Channel Motor Driver Board is a very compact 2 way or dual-channel H-bridge Motor controller or driver module. The module has 2 L9110 IC that are capable to control either one stepper motor or 2 DC motors independently. It accepts a wide range of voltage supply from 2.5V to 12V, which mak..
₹58 ₹65
Brand: FlyRobo
Model: FR-02-740
1JR Male To 2 Futaba Female Y Type Servo Extension Wire is used to connect two servos to a single servo port on an RC receiver or servo controller. This cable is useful for building RC Cars, Planes, Boats, and Robotics Projects which use servos. Its wires terminated on one end by a female connector..
₹58 ₹98
Brand: FlyRobo
Model: FR-08-132
The 1S 3.7V Li-ion 6MOS 9A Battery Protection Board is designed to enhance the safety and longevity of lithium-ion batteries. It features a robust 6MOSFET configuration, allowing for a maximum continuous discharge current of 9A. This board effectively protects against overcharging, over-discharging,..
₹58 ₹59
Brand: FlyRobo
Model: FR-04-301
The 300 RPM Single Shaft L- Shaped BO Motor motor gives good torque and rpm at lower operating voltages, which is the biggest advantage of these motors. It is an alternative to our metal gear DC motors. It comes with an operating voltage of 3-6V and is perfect for building small and medium robots.
..
₹58 ₹149
Brand: FlyRobo
Model: FR-02-965
Nylon Strap Belt is a 30CM Lipo Battery Strap Belt that can be a Reusable Cable Tie Wrap.
These LiPo battery straps, measuring 20mm wide by 300mm long, what you need to hold your batteries in place.
Features:
Ideal for power Li-Po battery management.
Organize your batteries more simply..
₹58 ₹69
Brand: FlyRobo
Model: FR-05-611
Pin Configuration
Pin Number
Pin Name
Description
1
Adjust/Ground
This pin adjusts the output voltage if it is a fixed voltage regulator it acts as a ground
2
Output ..
₹58
Brand: FlyRobo
Model: FR-08-334
The CH340N is a compact USB-to-serial interface IC designed for reliable and efficient data communication. It supports full-duplex asynchronous serial communication with baud rates up to 2 Mbps. Compatible with USB 2.0 and backward-compatible with USB 1.1, it simplifies connectivity in embedded syst..
₹58 ₹59
Brand: FlyRobo
Model: FR-05-652
The MAX3232 device consists of two line drivers, two line receivers, and a dual charge-pump circuit with ±15-kV ESD protection terminal to terminal (serial-port connection terminals, including GND).
The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between..
₹58
Brand: FlyRobo
Model: FR-05-260
The OT-FF N50WA Micro Motors is a high-precision, compact motor designed for various robotics, medical devices, and industrial automation applications. These motors feature a robust construction with high torque output and efficient power consumption.
Their low noise and vibration levels make the..
₹58 ₹69
Brand: FlyRobo
Model: FRM-02-624
The XT60 Male Wire connector is useful for connecting your battery and ESC. These are widely used to connecting battery with drones safely.
The XT60 connectors are suitable for high power brushless and brushed ESC and motors which are used in RC helicopters, quadcopter, plane, and cars. They ensu..
₹58 ₹129
Brand: FlyRobo
Model: FR-01-441
Any temperature sensor with Chromed and Alumel conductors that satisfies the output specifications outlined in ANSI/ASTM E230 or IEC 60584 for Type K thermocouples is referred to as a Type K thermocouple. This could be a wire, a surface sensor, an immersion sensor, or another kind of sensor or cable..
₹58 ₹69
Brand: FlyRobo
Model: FR-02-477
Introducing the eye-catching purple 4045 3 Blades Propeller (CW + CCW)! This high-performance propeller is intended to improve your drone or RC aircraft's flight performance. This propeller is designed to give great performance and durability whether you're a novice or seasoned pilot.
A special t..
₹58 ₹149
Brand: FlyRobo
Model: FR-06-369
0.4mm Nozzle is made of hardened steel for 1.75 mm filament. It is compatible with E3D v6 kits and is to be used for filament filled with carbon fiber or other abrasive materials.
Normally Carbon-filled filaments cause rapid and significant damage to standard nozzles, so these hardened steel nozz..
₹59 ₹299
Brand: FlyRobo
Model: FR-05-989
This makes it suitable for different applications. With a maximum output current of 5A, it can easily handle demanding loads. Its step-down design helps with efficient power conversion, reducing wasted energy and heat dissipation.
The module comes with built-in regulation circuitry that guarantee..
₹59 ₹84
Brand: FlyRobo
Model: FR-07-433
This is a BMS with a 20A current and 8.4-9V voltage rating to charge 2 cells of Li-ion cells. Two batteries (18650) can be connected simultaneously to the HX-2S-D20 charge-discharge controller module. The module has protection against short circuits, overcharge,s and over-discharge.
Features:
..
₹59 ₹158
Brand: FlyRobo
Model: FR-06-204
Transparent Openbuilds 5mm V-shaped Pulley for 3D Printer, it adopts motor-grade bearing, which is rust-proof, wear-resistant, and friction-resistant, and runs smoothly and without noise.
Features:
Model: V-type pulley
Bearing: 625zz bearing
Colour:Transparent+silver
Outside Diameter:..
₹59 ₹119
Brand: FlyRobo
Model: FR-07-978
The BPW34 DIP-2 Silicon Photocell is a high-sensitivity, fast-response photodiode designed for light detection in a wide range of applications. With a spectral sensitivity from 400 nm to 1100 nm, it is ideal for detecting visible and near-infrared light. The device features low capacitance, enabling..
₹59 ₹64
Brand: FlyRobo
Model: FR-08-354
The AT89C2051-24PU is an 8-bit microcontroller from Atmel, featuring a 20-pin Dual Inline Package (DIP-20) form factor. It operates with a maximum clock speed of 24 MHz and offers 2KB of Flash memory for program storage. This microcontroller includes 128 bytes of RAM, 15 I/O lines, and two 16-bit ti..
₹59 ₹314
Brand: FlyRobo
Model: FR-05-253
Introducing the 10mm Humidifier Microporous Nebulizer Tablet, a revolutionary solution for enhancing air quality. Crafted with precision, these compact tablets effortlessly disperse moisture and essential oils, transforming any space into a sanctuary of tranquility. Designed for compatibility with a..
₹59
Brand: FlyRobo
Model: FR-05-421
120uF 400V Electrolytic Capacitor is a high-quality electrolytic capacitor that offers long life and high reliability. Electrolytic Capacitors are the most commonly used type of capacitors in Electronic Circuits.
Features:
Capacitor Type: Electrolytic
Mounting Type: Through Hole.
Elect..
₹59
Brand: FlyRobo
Model: FR-07-205
This is PLASTIC TIES 150 mm Black (100PCS), 150mm long black nylon cable ties in 2.5mm width, ideal for general cable bundling, etc. Bag of 100 cable ties.
A reusable cable tie is a great way to keep your cables neatly organized, untangled and out of the way.
These reusable ties can be used ov..
₹59
Brand: FlyRobo
Model: FR-05-963
For a variety of electronic projects, we present the 15mm EC11 Rotary Encoder with Switch Digital Potentiometer, a flexible and small input device. This encoder offers accurate control and input capabilities in a single package by combining the functions of a digital potentiometer and a rotary encod..
₹59
Brand: FlyRobo
Model: FR-06-505
The 16 Teeth 5mm Inner Hole 2GT Synchronous Pulley is designed for precision motion transmission in 3D printers, CNC machines, and robotics.It features a 5mm inner bore, making it compatible with standard NEMA 17 stepper motors.Made from durable aluminum alloy, it ensures smooth and efficient power ..
₹59
Brand: FlyRobo
Model: FR-02-645
This 2.4Ghz Antenna is universal 2.4Ghz Antenna for X6R X8R D Series XSRF3O XSRF3PO XSRF4O XSRF4PO Receiver. And Also compatible with other transmitter and receiver like Radiolink.
Feature:
Connector: Ipex1
FrSky IPEX1 dipole antenna with a copper tube contributes much better efficie..
₹59
Brand: FlyRobo
Model: FR-06-459
The Aluminum Alloy Rigid 6x8 Coupling is designed to securely connect stepper motor shafts to lead screws or drive rods.Made from high-quality aluminum alloy, it offers excellent durability and precise torque transmission.Its rigid structure ensures zero backlash, improving the accuracy of your 3D p..
₹59
Brand: FlyRobo
Model: FR-07-529
The 7 Bit WS2812 5050 RGB LED module features vibrant, addressable full-color lighting. Each LED has a built-in driver chip, enabling independent color and brightness control. The 5050 SMD LEDs deliver bright and uniform illumination. Compatible with Arduino and other microcontrollers for easy progr..
₹59
Brand: FlyRobo
Model: FR-08-336
The CH340C is a compact SOP16 USB-to-serial port IC that provides seamless connectivity between USB and UART interfaces. It supports data transfer rates up to 2 Mbps, ensuring high-speed communication for various applications. With its built-in crystal oscillator, it eliminates the need for external..
₹59 ₹66
Brand: FlyRobo
Model: FR-08-337
The CH340T SOP20 USB to Serial Port IC is a versatile interface chip designed for seamless USB to serial communication. It supports RS232, RS485, and UART protocols, making it suitable for a variety of applications. With a built-in crystal oscillator, it ensures stable data transmission at baud rate..
₹59
Brand: FlyRobo
Model: FR-06-243
CNC 3D Printer Mechanical Endstop Switch uses a lever switch to detect when it is activated. The switch is wired up so that when activated, it pulls the signal to LOW. There is also an LED on the board that will light up when the switch is activated. It uses a standard 4 pin 100″ pitch header and ac..
₹59 ₹99
Brand: FlyRobo
Model: FR-06-262
GT2 Rubber Timing Belt is a Closed-loop with 6mm width and 200mm long used for 3d printers. The Grip used in the GT2 system is an extension of the HTD system with greater load-carrying capacity. It is made as a flexible belt with teeth molded onto its inner surface.
Features:
Type: Closed L..
₹59 ₹148
Brand: FlyRobo
Model: FR-02-750
JST-XH 6S 10cm Balance Charge Wire is used to replace the JST-XH style balance plug on a Li-Po battery for charging purposes.
Features:
Cable Length: 10cm
High-quality 22 AWG silicone insulated wire.
Great for your balance connector for most standard Lipos.
Ideal for all types of R/C ..
₹59
Brand: FlyRobo
Model: Z-9124
The Li-Ion 18650 3.7V 1200mAh Lithium-ion Battery is a high-capacity rechargeable cell, ideal for a wide range of applications. It features a nominal voltage of 3.7V and a capacity of 1200mAh, providing reliable and long-lasting power. This cylindrical battery is commonly used in flashlights, power ..
₹59 ₹99
Brand: FlyRobo
Model: FR-02-639
M5 Propeller Nut Cap CW CCW for Emax 2204 Brushless DC Motor is the set of two different i.e CW and CCW Nut Cap for 2204 brushless motor to be fitted above the propeller.
Propeller nuts of different directions usually come in different colors, such as black and silver for better user-friendliness..
₹59
Brand: FlyRobo
Model: FR-08-346
The PIC12F683-I/SN is an 8-bit Flash Microcontroller in a compact SOP-8 package, designed for versatile embedded applications. It features a 20 MHz internal oscillator, 3.5 KB of Flash memory, 128 bytes of RAM, and 6 I/O pins for enhanced functionality. The device includes an integrated 10-bit ADC, ..
₹59
Brand: FlyRobo
Model: FR-05-799
The Red 0.36 inch Digital Three-Wire DC Voltmeter is a compact and reliable voltage monitoring tool.Featuring a bright red LED display, it ensures clear readings even in low-light conditions.Designed to measure DC voltages typically from 3V to 30V with high accuracy.Its three-wire configuration allo..
₹59
Brand: FlyRobo
Model: FR-07-231
The Red Breadboard Jumper Cable Wires (50pcs) are essential for electronics prototyping and circuit testing. These flexible wires are pre-cut and stripped, ideal for quick and easy connections on breadboards. With 50 pieces in a set, they provide ample supply for various projects. The durable insula..
₹59
Brand: FlyRobo
Model: C-1226
This Cable IPX to SMA Female can be used to convert the UFL/ IPX to SMA Female. The cable has a length of 10 cm. It has UFL / IPX Female connector on one end, and SMA Female on the other end.
Features:
Wire length: 15-20cm
SMA Connector type: Female
It is a 1.13 mm RF Cable
It adds ..
₹59
Brand: FlyRobo
Model: FR-08-310
The STM32F030C8T6 is a high-performance 32-bit microcontroller based on the ARM Cortex-M0 core, running at up to 48 MHz. It features 64 KB of Flash memory, 8 KB of SRAM, and a rich set of peripherals, including timers, ADC, and USART. With 48 pins in an LQFP package, it offers compact and versatile ..
₹59 ₹146
Brand: FlyRobo
Model: FR-01-084
This is a Thermal Conductive Silicone Pad of size 40x40x1mm, used for good thermal conductivity between IC and heatsink. Heat can be conducted from the internal device to the metal shell or the heat sink plate Improve the efficiency and service life of heating electronic components.
Features:
..
₹59
Brand: FlyRobo
Model: FRM-02-572
XT60 Female Connector with 14AWG Silicon Wire is useful while connecting your battery and ESC. These are widely used Li-PO battery connectors XT60 Female with 14AWG Silicon Wire, it makes the connection between the battery and motor much easier.
Features:
Connector Type: XT60 Female
High..
₹59 ₹129
Brand: FlyRobo
Model: FR-01-118
74HC4051 8 Channel Analog Multiplexer Module used for a DIY project. 74HCT4051 is a single-pole octal-throw analog switch (SP8T) suitable for use in analog or digital 8:1 multiplexer/demultiplexer applications.
Features:
Three digital select inputs (S0, S1, and S2), eight independent inputs..
₹59 ₹198
Brand: FlyRobo
Model: FR-05-339
The 2S-1A | 18650 Polymer Lithium Ion Charger Type C to 2S 8.4V 2A Booster Module is a versatile charging solution designed for 18650 lithium-ion batteries. Featuring a Type C input for modern connectivity, it efficiently boosts voltage to 8.4V with a 2A output, ideal for powering a variety of elect..
₹59 ₹235
Brand: FlyRobo
Model: FR-05-341
The 2S-4A | 18650 Polymer Lithium Ion Charger is a versatile charging module designed for 18650 lithium-ion batteries. Featuring a Type C input, it supports 2S configurations, delivering a stable 8.4V at 4A for efficient charging. This booster module ensures optimal performance and safety with built..
₹59 ₹235
Brand: FlyRobo
Model: FR-05-345
The 4S-1A | 18650 Polymer Lithium Ion Charger Type C to 4S 14.8V 1A Booster Module is a versatile charging solution for 18650 lithium-ion batteries. It features a Type C input, allowing for modern, reversible USB-C connectivity. This module boosts input voltage to 14.8V, ensuring efficient charging ..
₹59 ₹235
Brand: FlyRobo
Model: FR-07-509
The LM34 is a precision Fahrenheit temperature sensor in a standard TO-92 package suitable for remote applications or direct PCB mounting. The LM34 has a wide operating voltage range of 5 to 30 volts DC and a temperature range of +32° to +212°F.
Package Includes:
1 x LM34 Temperature Sens..
₹59 ₹99
Brand: FlyRobo
Model: FR-02-637
XT90 connectors are made from high-temp nylon with gold-plated spring pins or sockets molded in. The shape of the XT90 prevents reverse polarity, and when plugged in the connection is super-solid. Perfect for applications up to 90A continuous draw.
The XT90 offers a tight fit, ensuring a solid co..
₹59 ₹135
Brand: FlyRobo
Model: FR-06-286
Aluminum Flexible Shaft Coupling is lightweight coupling and exhibits more strength in class. This is made up of HE-30 grade aluminum. This type of couplings is very common and found in a wide range of CNC Machines. They can firmly hold the shaft of the motor and other peripherals with the help of G..
₹60 ₹149
Brand: FlyRobo
Model: FR-06-360
GT2 Aluminum Pulley without 16 teeth has a 3mm Bore, and it works with GT2 6mm wide timing belt. The Timing Belt and Pulley together form an integral part of a 3D printer.
Features:
Material: Aluminum
Teeth type: 16WT, Bore 3mm
It is suitable for 6mm Width Timing Belt
Applications:..
₹60 ₹99
Brand: FlyRobo
Model: FR-04-511
Specification:
If jumper is hit the position of ON DP, that means 16 segment (4988) or 32 segment (8825)Jm connected motor
connect 5v and 9v power supply
E, S, D, G, respectively corresponding to the connection of the Enable/Step/Dir/Gnd drive signal output
Package included:
1 ..
₹60 ₹130
Brand: FlyRobo
Model: FR-01-955
Features:
1. Place it directly on a breadboard with red and blue lines.
2. With DC-005 round hole plug input, input voltage 6.5-12v, compatible with most power adapters.
3. With USB input, it can be directly connected to computer USB or 5V power supply.
4. With Micro USB input, most mobi..
₹60 ₹99
Brand: FlyRobo
Model: FRC-05-742
Features and Specifications :
Product : LED Diod (Light Emitting Diod)
Light Colour : White, Green, Red, Yellow and Blue
LED Type : 5mm
Package Include:
5 X White LED Diode 5mm
5 X Green LED Diode 5mm
5 X Red LED Diode 5mm
5 X Yellow LED Diode 5mm
5 X Blue LED D..
₹60
Brand: FlyRobo
Model: FR-02-557
DF13 6 Pin Flight Controller communication cable uses the Hirose DF13 series connector. It is typically used between the PixHawk and the GPS receiver module.
Features:
Brand new and high quality
Length : 20cm
Width and Height of plug: 9 x 2.5 mm
Good temperature resistive
Silicon f..
₹60 ₹89
Brand: FlyRobo
Model: FR-06-284
Aluminum Flexible Shaft Coupling is lightweight coupling and exhibits more strength in class. This is made up of HE-30 grade aluminum. This type of couplings is very common and found in a wide range of CNC Machines. They can firmly hold the shaft of the motor and other peripherals with the help of G..
₹60 ₹149
Brand: FlyRobo
Model: FR-01-873
This is a supermini Solar Lipo charger based on the CN3065 - a single lithium battery charge management chip. This Solar charger provides you with the ability to get the most possible power out of your solar panel or other photovoltaic device and into a rechargeable LiPo battery. Set-up is easy as w..
₹60 ₹289
Brand: FlyRobo
Model: FR-07-090
GX16 4-Pin Aviation Socket Plug, also known as circular shell connector. It is a panel-mount type connector with a male end mounted on the panel and a female connector usually plugs into it. It is used in places where a watertight connection is required.
Features:
Simple to install.
Male ..
₹60 ₹142
Brand: FlyRobo
Model: FR-06-416
This is an Aluminum GT2 Timing Double Head Pulley 20 Tooth 8mm Bore for 10mm Belt. Two set screws can be used to attach it firmly. These are very light and durable as it has a full aluminum body.
Features:
Teeth Type: 20T; 8mm Bore
GT2 belts and pulleys offer excellent precision.
It is ..
₹60 ₹249
Brand: FlyRobo
Model: FR-05-894
Introducing the perfect option for accurate voltage control and effective switching in electronic circuits: the PC817 2-Channel Optocoupler Isolation Board. The safe and sound operation of your electronic systems is guaranteed by the dependable isolation that this small, adaptable module offers betw..
₹61 ₹64
Brand: FlyRobo
Model: FR-05-832
The Multipurpose PCB Ruler (15CM): Your Crucial Engineering Measuring Tool
Meet your new best friend in precision measurement, engineers and hobbyists. Our versatile PCB ruler, which measures only 15 cm, is a game-changer for your designs.
Never skimp on precision. The Multipurpose PCB Ruler,..
₹61 ₹89
Brand: FlyRobo
Model: FR-08-110
The Micro USB Solar Charging Module is designed to efficiently charge batteries using solar panels. It features a built-in charge controller that manages charging and prevents overcharging. The module supports input via a Micro USB port or solar input, offering flexible power sources. It is compatib..
₹61 ₹99
Brand: FlyRobo
Model: FR-01-037
This is the Development programmer board for ATtiny13A, ATtiny25, ATtiny45, and ATtiny85.
Features:
Easy to use.
Convenient and fast programming.
Development board supporting chip:ATtiny13A / ATtiny25 / ATtiny45 / ATtiny85
Package includes:
1 x ATtiny13A ATtiny25 ATtiny45 ATtiny..
₹61 ₹99
Brand: FlyRobo
Model: FR-07-091
GX16 5-Pin Aviation Socket Plug, also known as circular shell connector. It is a panel-mount type connector with a male end mounted on the panel and a female connector usually plugs into it. It is used in places where a watertight connection is required.
Features:
Simple to install.
Male ..
₹61 ₹149
Brand: FlyRobo
Model: FR-05-808
The Blue 0.36 inch Digital Three-Wire DC Voltmeter with Case is a compact and reliable voltage display module. It features a bright blue LED display for clear visibility even in low light conditions. The three-wire design allows for independent power and measurement, ensuring accurate readings. It c..
₹61
Brand: FlyRobo
Model: FR-01-746
PAM8403 is a small digital amplifier chip, high-definition sound quality highlights the advantages of digital chips, the circuit using the most reasonable peripheral configuration, power supply filtering is upgraded to 470uf.
Note!!! Please make sure the power supply is not more than 5.5V and ple..
₹61 ₹95
Brand: FlyRobo
Model: FR-08-120
The 12V/24V to 5V DC-DC Step Down Charging Module efficiently converts higher voltage inputs into a stable 5V output, ideal for charging devices and powering electronics. It features high conversion efficiency and low heat generation, ensuring reliable performance in various applications. The compac..
₹61 ₹119
Brand: FlyRobo
Model: FR-06-267
This is Stainless Steel Nozzle Cleaning Needle for 0.2mm nozzle used in 3d printers. It is made up of high-quality stainless steel. It can effectively clean the nozzle of a 3D printer, the nozzle will not easily be damaged. It is very reliable and easy to use, because of the smooth and sharp tip of ..
₹61 ₹239
Brand: FlyRobo
Model: FR-06-266
This is Stainless Steel Nozzle Cleaning Needle for 0.3mm nozzle used in 3d printers. It is made up of high-quality stainless steel. It can effectively clean the nozzle of a 3D printer, the nozzle will not easily be damaged. It is very reliable and easy to use, because of the smooth and sharp tip of ..
₹62 ₹239
Brand: FlyRobo
Model: FR-01-502
This is a 2-Channel Relay interface board. It can be used to control various appliances and other types of equipment with a large current. It can be controlled directly with 3.3V or 5V logic signals from a microcontroller.
Features:
Trigger mode: High level
This relay module is 5V activ..
₹62 ₹104
Brand: FlyRobo
Model: FR-01-800
8 Channel Bi-Directional Logic Level Converter Module is a Bi-directional logic level converter is a small device that safely steps down 5V signals to 3.3V and steps up 3.3V to 5V at the same time. This level converter also works with 2.8V and 1.8V devices. What really separates this Logic level con..
₹62 ₹68
Brand: FlyRobo
Model: FR-07-512
Mini IR Pyroelectric Infrared PIR Motion Human Sensor is based on the digital intelligent infrared technology, automatic control products. High sensitivity, high reliability. Widely used in various auto-sensing electrical equipment.
Features:
Low power consumption, small size, easy to insta..
₹62 ₹411
Brand: FlyRobo
Model: FR-07-230
The Black Breadboard Jumper Cable Wires (50pcs) are essential for prototyping and circuit building. These flexible, pre-stripped wires are perfect for creating quick connections between components on a breadboard. With 50 pieces in the pack, you'll have plenty of wires to work with, making your proj..
₹62
Brand: FlyRobo
Model: FR-01-582
Infrared Obstacle Avoidance Sensor Module is very easy to interface directly with Arduino or other micro-controllers. It also works with the Raspberry Pi with a voltage range of 3-6 volts. It is assembled module with 4 pins. It has an onboard status LED.
Feature:
Four pins: +5-volts, GND, ..
₹62 ₹79
Brand: FlyRobo
Model: FR-01-611
0.28inch 0-100V Three Wire LED Display Digital DC Voltmeter is a tiny and compact digital voltmeter with a RED LED Display.
This voltmeter can be used to measure the storage battery’s voltage up to 100Volts in motorcycles and cars and also can grasp the storage battery’s status.
This voltmeter..
₹62 ₹149
Brand: FlyRobo
Model: FR-06-383
POM Wheel Pulley with Double Bearing is produced by high-precision automatic lathe machining, with machining error within 0.005mm. This pulley bearing adopts motor-grade bearing, which is rust-proof, wear-resistant and friction-resistant, and runs smoothly and without noise.
Features:
Mate..
₹62 ₹99
Brand: FlyRobo
Model: FR-01-608
0.28inch 0-100V Three Wire LED Display Digital DC Voltmeter is a tiny and compact digital voltmeter with a YELLOW LED Display.
This voltmeter can be used to measure the storage battery’s voltage up to 100Volts in motorcycles and cars and also can grasp the storage battery’s status.
This voltme..
₹62 ₹149
Brand: FlyRobo
Model: FR-04-425
Aluminum Servo Horn Arm 25T compatible with MG995 servo motor. It includes two steel bolts to secure the split clamp onto servo output. It is perfect for servos with 25 teeth and has an aluminum body.
Features:
Teeth Number: 25T
Color: Silver
High-quality and durable in performance.
L..
₹62 ₹98
Brand: FlyRobo
Model: FR-01-268
2×1 Matrix Membrane Switch Keypad features a total of 2 buttons in Matrix form. This is a membrane keypad with no moving parts. A female 3-pin berg connector is required for interfacing it with your microcontroller circuits. A simple way to mount the keypad in a variety of applications, as it has an..
₹63 ₹79
Brand: FlyRobo
Model: FR-06-232
This GT2 Timing Idler Aluminum Pulley works with GT2 6mm wide timing belt; it will work perfectly with GT2 pulley-belt sets we are selling on our site. This idler is a good match for 20T GT2 driving Timing Belt Pulley.
Widely used in milling machine, 3D Printer, gear shaper, drilling machine, ..
₹63 ₹129
Brand: FlyRobo
Model: FR-06-415
This is an Aluminum GT2 Timing Double Head Pulley 20 Tooth 5mm Bore for 10mm Belt. Two set screws can be used to attach it firmly. These are very light and durable as it has a full aluminum body.
Features:
Teeth Type: 20T; 5mm Bore
GT2 belts and pulleys offer excellent precision.
It is ..
₹63 ₹249
Brand: FlyRobo
Model: FR-01-038
The Red And Black Alligator Test Clips Clamp To USB Male Connector Power Supply Adapter Wire 58cm Cable is part of the Red And Black Alligator Test Clips Clamp To USB Male Connector Power Supply Adapter Wire 58cm Cable. On one end, it has insulation-covered clips connected to the wire, while on the ..
₹63 ₹99
Brand: FlyRobo
Model: FR-01-617
DS18B20 Waterproof Digital Temperature Sensor cable is very useful to measure temperature far away or in wet conditions. While the sensor is good up to 125°C the cable is jacketed in PVC so we suggest keeping it under 100°C.
They work great with any microcontroller using a single digital pin, and..
₹63 ₹139
Brand: FlyRobo
Model: FR-01-640
This module based on Nordic nRF24L01, a highly integrated, ultra-low-power 2Mbps RF transceiver for the 2.4GHz ISM band. Nordic nRF24L01+ integrates a complete 2.4GHz RF transceiver, RF synthesizer, and baseband logic including the Enhanced ShockBurst™ hardware protocol accelerator supporting a hig..
₹63 ₹81
Brand: FlyRobo
Model: FR-01-748
RDA5807M FM Stereo Radio Module is a high sensitivity, low power consumption, ultra-small size of the FM stereo radio module.
Using RDA Microelectronics of RDA5807M, this circuit fewer external components, the noise factor is minimal. Its highly cost-effective single-chip FM stereo radio module...
₹63 ₹98
Brand: FlyRobo
Model: FR-06-265
This is Stainless Steel Nozzle Cleaning Needle for 0.4mm nozzle used in 3d printers. It is made up of high-quality stainless steel. It can effectively clean the nozzle of a 3D printer, the nozzle will not easily be damaged. It is very reliable and easy to use, because of the smooth and sharp tip of ..
₹63 ₹239
Brand: FlyRobo
Model: FR-06-269
SK8 8mm Linear Bearing Rail Support is usable with any 8mm linear guide, you can simply slide the rail through, then tighten the clamp screw at the top to fix it in place.
It can be used up to 6mm diameter bolts to attach them. If you need to disassemble or otherwise repair your robot or machine,..
₹63 ₹89
Brand: FlyRobo
Model: FR-06-357
GT2 Aluminum Pulley without 20 teeth has a 3mm Bore, and it works with GT2 6mm wide timing belt. The Timing Belt and Pulley together form an integral part of a 3D printer.
Features:
Material: Aluminum
Teeth type: 20WT, Bore 3mm
It is suitable for 6mm Width Timing Belt
Applications:..
₹64 ₹119
Brand: FlyRobo
Model: FR-04-305
The 100RPM Single Shaft L- Shaped BO Motor motor gives good torque and rpm at lower operating voltages, which is the biggest advantage of these motors. It is an alternative to our metal gear DC motors. It comes with an operating voltage of 3-6V and is perfect for building small and medium robots.
..
₹64 ₹75
Brand: FlyRobo
Model: FR-04-298
The 60 RPM Duel Shaft BO Motor motor gives good torque and rpm at lower operating voltages, which is the biggest advantage of these motors. It is an alternative to our metal gear DC motors. It comes with an operating voltage of 3-6V and is perfect for building small and medium robots.
A small sha..
₹64
Brand: FlyRobo
Model: FR-05-372
This is a 9 x 15 cm Universal PCB Prototype Board Single-Sided 2.54mm Hole Pitch. It has a standard 2.5mm (0.1 inches) spacing through holes.
Features:
Dimension: 9 x 15cm
Thickness: 1.5mm
Hole pitch: 2.54mm
Single-Sided PCB
High quality of base material
It has a thickness of the ..
₹64
Brand: FlyRobo
Model: FR-01-935
This is CH340G USB To TTL(Serial) Converter, USB to TTL / USB-TTL /STC microcontroller programmer / PL2303 in nine upgrades plate with a transparent cover Compatible with ARDUINO, RASPBERRY PI, AVR, PIC, 8051, etc.
This USB–TTL converter is based on CH340G USB to Serial TTL converter chip. The mo..
₹64 ₹89
Brand: FlyRobo
Model: FR-07-053
DC 5.5x2.1mm Male to Female Plug Connector Power Extension Cable has one Female connector and 1 Male connector. It works perfectly for any device that requires a power adapter with a 2.1mm x 5.5mm plug.
Features:
Type: 5.5*2.1mm DC Power Male to Female Connector Cable
Cable Length: 1 mete..
₹64 ₹68
Brand: FlyRobo
Model: FR-01-933
This USB to UART/ESP8266 Adapter Programmer for ESP-01 WiFi Modules with CH340G Chip converts the signal from a USB interface to a PC / laptop to match a serial module ESP8266.
This converter module has a CH340 chip which is reliable and with high performance. It is compatible with most Windows s..
₹64 ₹139
Brand: FlyRobo
Model: FR-01-041
XH-M125 XPT8871 6W 3-5V Mono Power Amplifier Board which works in conventional class (class AB and Class D).
Features:
Model: XH-M125
Power: stereo mono 5W
Low power consumption
Package Includes:
1 x XH-M125 XPT8871 6W 3-5V Mono Power Amplifier Board...
₹64
Brand: FlyRobo
Model: FR-01-923
DB9 Male Screw Terminal to RS232 RS485 Conversion Board, this is RS232 Serial DB9 9-pin to 9 Position Screw Terminal Block. Connector DB9 adapter terminals to facilitate the commissioning equipment of the project.
Features :
Experimentation and prototype work.
All 9 pins of a DB9 connecto..
₹64 ₹119
Brand: FlyRobo
Model: FR-07-757
ESD-10 Stainless Steel Tweezer features anti-magnetic and anti-acid properties. ESD-10 (Standard): used to solder IC chips, and install or replace components.
Features:
Type: ESD-10
Made of the high-quality stainless steel
It can use to install or replace the repair parts.
The tweeze..
₹64 ₹66
Brand: FlyRobo
Model: FR-07-620
The Lucky Wheel DIY Kit is an engaging and educational electronic project, perfect for hobbyists and students alike. This kit includes all necessary components to build a functioning LED-based spinning wheel, providing hands-on experience with basic electronics and soldering. Once assembled, the whe..
₹64 ₹89
Brand: FlyRobo
Model: FR-01-891
The 9Bit WS2812 5050 RGB LED Built-in Full-Color Driving Lights Circular Development Board has a round black shape. 9 super bright smart NeoPixels LED arranged in a 28mm outside diameter circular PCB.
These ring RGB lamps can be simply connected via the output pin cascade one to the other’s input..
₹64 ₹199
Brand: FlyRobo
Model: FR-07-092
GX16 6-Pin Aviation Socket Plug, also known as circular shell connector. It is a panel-mount type connector with a male end mounted on the panel and a female connector usually plugs into it. It is used in places where a watertight connection is required.
Features:
Simple to install.
Male ..
₹64 ₹152