Brand: FlyRobo
Model: FR-04-260
This MINI 3PI car N20 Caster Robot Ball Wheel consists of four small balls and a large steel ball, all the steel ball with stainless steel ball, to ensure long-term use will not rust, the outer ring material is plastic, suitable for smart car chassis Support and desktop miniature robots above.
..
₹42 ₹65
Brand: FlyRobo
Model: FR-05-265
The Piezoelectric Passive Buzzer, measuring 44mm in diameter and 14mm in height, is a compact and efficient audio signaling device. It operates on the principle of piezoelectricity, generating sound through mechanical vibrations induced by electrical signals. Unlike active buzzers, it requires an ex..
₹42
Brand: FlyRobo
Model: FR-01-666
Surface Thermocouple Temperature Resistance Probe can be used with k type digital thermometer to measure the temperature of air and gas with 0 to 600 °C Range. It is designed with k type connector with an insulated wire.
Features:
Connector Type: K Type
Measuring range: 0 to 600 °C
Colo..
₹42 ₹68
Brand: FlyRobo
Model: FR-01-060
This is a 40mm x 40mm x 8mm (LxWxH) Aluminum Heatsink which can be used for multipurpose applications. The aluminum heat sink reduces the risk of hardware failure because of overheating.
Features:
Quantity of blade: 13
It absorbs heat quickly.
it does not come with adhesive film on the..
₹42 ₹69
Brand: FlyRobo
Model: FR-01-005
HS0038BD SIP3 Infrared Remote Control Receiver is a miniaturized receiver for infrared remote control systems. A PIN diode and a preamplifier are assembled on a lead frame, the epoxy package acts as an IR filter.
Features:
Model: HS0038BD
Power supply: 5V
The angle of detection is 90°
..
₹43 ₹49
Brand: FlyRobo
Model: FR-01-759
The Keypad1x4 features a total of 4 buttons in Matrix form. This is a membrane keypad with no moving parts. A female 5-pin berg connector is required for interfacing it with your microcontroller circuits. A simple way to mount the keypad in a variety of applications, as it has an adhesive backing.
..
₹43 ₹88
Brand: FlyRobo
Model: FR-01-263
Bluetooth Serial Transceiver Module Base Board can install Bluetooth modules, such as HC05, HC06, HC07, BC04, or other compatible Bluetooth modules.
Features:
Input voltage 3.6V to 6V, must not exceed 7V
The pin-outs include TXD, RXD, STATE ( if any ), KEY ( if any ) common pin
Compatib..
₹43 ₹99
Brand: FlyRobo
Model: FR-07-207
This is PLASTIC TIES 200 mm Black (100PCS), 200mm long black nylon cable ties in 3.6mm width, ideal for general cable bundling, etc. Bag of 100 cable ties.
A reusable cable tie is a great way to keep your cables neatly organized, untangled and out of the way.
These reusable ties can be used o..
₹43 ₹97
Brand: FlyRobo
Model: FR-07-208
This is PLASTIC TIES 200 MM WHITE (100PCS), 200mm long black nylon cable ties in 4.8mm width, ideal for general cable bundling, etc. Bag of 100 cable ties.
This cable tie is a great way to keep your cables neatly organized, untangled and out of the way.
These reusable ties can be used over an..
₹43 ₹97
Brand: FlyRobo
Model: FRM-02-573
XT60 Parallel Adapter Connection Plug has 1Male - 2Female used for connecting a LiPo battery to two applications i.e two ESCs to one battery.
It has one XT60 male connector to which LiPo battery is connected and two XT60 female connector plugs to connect two compatible application which demands t..
₹43 ₹264
Brand: FlyRobo
Model: FR-01-922
The HDMI Female to Micro HDMI Male Adapter eliminates the need for multiple cables and clutter. It is a cost-effective way of connecting HDMI Mini-enabled devices to standard HDMI ports.
The HDMI Female to Micro HDMI Male Adapter adapts an HDMI cable to fit into a Mini HDMI port on a laptop, camc..
₹43 ₹48
Brand: FlyRobo
Model: FR-01-562
IIC/I2C Interface Adapter Module is used for 16×2 LCD Display. It uses the PCF8574T IC chip which converts I2C serial data to parallel data for the LCD display. Also, this interface module simplifies connecting an Arduino to a 16×2 Liquid Crystal display using only 4 wires.
Specifications and Fea..
₹43 ₹95
Brand: FlyRobo
Model: FR-01-083
This is a Thermal Conductive Silicone Pad of size 70x22x1mm, used for good thermal conductivity between IC and heatsink. Heat can be conducted from the internal device to the metal shell or the heat sink plate Improve the efficiency and service life of heating electronic components.
Features:
..
₹43
Brand: FlyRobo
Model: FR-01-362
This is a Blue Aluminum Heatsink kit used for cooling the chips on Raspberry Pi. It has been attached with thermally conductive adhesive tape, allowing the Raspberry Pi to cool more efficiently.
The heatsink has an adhesive film on the back. It is very easy to mount it on the BGA chip. Just remo..
₹43 ₹89
Brand: FlyRobo
Model: FR-04-344
3V DC Double Shaft Mini Motor has a shaft on both sides. This particular motor is a standard “130” size DC motor – but instead of a shaft extending from one side, this motor has a 2mm shaft extending from both ends.
After power-on, both sides rotate at the same time, which can make a variety of i..
₹43 ₹49
Brand: FlyRobo
Model: FR-07-160
This heat shrink has exceptional insulation characteristics, excellent stress control properties; long-term weather and regular wear and tear resistance, ease of installation and reliable performance in even in harshest of situations. These High performance 2:1 heat shrink material tubes, bundles, a..
₹43 ₹54
Brand: FlyRobo
Model: FR-05-870
The E3D V5 Aluminum Heater Block is here, a portable powerhouse for all your 3D printing requirements. This heater block, which is only 16x16x12 mm in size, is made with accuracy and efficiency in mind. Because it is made of premium aluminum, it guarantees stability and ideal heat distribution throu..
₹44 ₹47
Brand: FlyRobo
Model: FR-02-952
The 12mm to 8mm pipe coupler is a durable and reliable fitting designed to connect pipes with different diameters. It seamlessly joins 12mm and 8mm pipes, making it ideal for various fluid or gas transfer applications. Made from high-quality materials, it ensures a leak-proof connection and long-las..
₹44 ₹54
Brand: FlyRobo
Model: FR-07-408
Lithium-Ion charge protection circuit comes with over-charge, over-discharge, over-current and short circuit protection. MOS transistor can control the battery charge and discharge, Built-in three-stage over-current detection circuit, for a variety of various shapes 3.7 V lithium-Ion batteries.hx-2s..
₹44 ₹223
Brand: FlyRobo
Model: FR-07-530
The 4-bit WS2812 5050 RGB LED module features individually addressable LEDs with a built-in full-color driver. Each LED can display vibrant colors and brightness levels controlled via a single data line. The compact square design is perfect for creative lighting projects, DIY decorations, and visual..
₹44
Brand: FlyRobo
Model: FR-05-755
This is a Universal PCB Prototype Board Double-Side 5 x 7 CM High-quality universal prototyping board with standard 0.1″ spacing through holes.
Features:
Dimension: 5×7 CM
Base Material: FR4
Copper Thickness 1-4 OZ
Min. Hole Size 0.3mm..
₹44 ₹75
Brand: FlyRobo
Model: FR-01-650
The 8Bit WS2812 5050 RGB LED Built-in Full-Color Driving Lights Circular Development Board has a round black shape. 8 super bright smart NeoPixels LED arranged in a 28mm outside diameter circular PCB.
These ring RGB lamps can be simply connected via the output pin cascade one to the other’s input..
₹44 ₹199
Brand: FlyRobo
Model: FR-01-741
LM358 Gain Signal Amplification Operational Amplifier Module which can provide amplification of about 100 times. This can be used very easily as it has header pins that can connect directly to your development board. It is designed to operate from a single power supply over a wide range of voltages...
₹44 ₹86
Brand: FlyRobo
Model: FR-01-921
This Micro USB OTG Adapter Host Cable can be used well for OTG support device. It can also be used properly for A phone. Smart Android Phone, which has a small USB port. Don’t be fooled by the appearance of this cable, it’s not just a regular micro USB cable, but a USB OTG (On the Go..
₹44 ₹89
Brand: FlyRobo
Model: FR-01-578
PAM8406 Digital Amplifier Module has a double channel stereo output. It's a good noise suppression module. If you don’t receive input audio, you will not hear any noise in your ears.
The 5V power supply gives the output of 5W+5W power. It can directly drive the 4 Omega, 8 Omega small soundbox, th..
₹44 ₹169
Brand: FlyRobo
Model: FR-06-108
The Stainless Steel 1.75/1.2mm E3D Nozzle is a precision-engineered component designed for 3D printing enthusiasts and professionals. Crafted from high-quality stainless steel, this nozzle offers exceptional durability and resistance to wear, ensuring longevity and consistent performance. With a noz..
₹45 ₹69
Brand: FlyRobo
Model: FRM-02-622
Description:
The product is a T Plug Male to XT60 Plug Female Connector.
Package included:
1x T Plug Male to XT60 Plug Female Connector..
₹45 ₹199
Brand: FlyRobo
Model: FR-02-480
Our quality 1060 Propeller (CCW only) is now available and is the ideal option for RC enthusiasts looking to improve the performance and dependability of their quadcopters or multirotor aircraft. This propeller is intended to take your flying experience to new heights, regardless of whether you are ..
₹45 ₹59
Brand: FlyRobo
Model: FR-01-235
This is a 31mm x 31mm x 11mm (LxWxH) Aluminum Heatsink which can be used for multipurpose applications. The aluminum heat sink reduces the risk of hardware failure because of overheating.
Features:-
Quantity of blade: 12
It absorbs heat quickly.
Designed to maximize its surface area in ..
₹45 ₹129
Brand: FlyRobo
Model: FR-07-203
This is PLASTIC TIES 100 MM (100pcs/Bag), 100mm long black nylon cable ties in 2.5mm width, ideal for general cable bundling, etc. Bag of 100 cable ties.
A reusable cable tie is a great way to keep your cables neatly organized, untangled and out of the way.
These reusable ties can be used over..
₹45
Brand: FlyRobo
Model: FR-07-204
This is PLASTIC TIES 100 MM White (100pcs), 100mm long white nylon cable ties in 2.5mm width, ideal for general cable bundling, etc. Bag of 100 cable ties.
A reusable cable tie is a great way to keep your cables neatly organized, untangled and out of the way.
These reusable ties can be used ov..
₹45
Brand: FlyRobo
Model: FR-08-133
The 1S 3.7V Li-ion 3MOS 4.5A Battery Protection Board is designed to ensure the safe operation of lithium-ion batteries. This compact module features three MOSFETs for efficient switching and protection against overcharging, over-discharging, and short circuits. With a continuous current rating of 4..
₹45
Brand: FlyRobo
Model: FR-01-667
This PCB Mounted Passive Buzzer Module can produce a range of sound tones depending on the input frequency, i.e it can generate tones between 1.5 to 2.5 kHz by switching it on and off at different frequencies either using delays or PWM.
This module is ideally suited to adding noise to your projec..
₹45
Brand: FlyRobo
Model: FR-05-999
This is a set of double-ended crocodile/alligator clips, designed for electrical DIY test leads. Each clip is covered with insulation and connected to the wire from both ends. Alligator clips can also be used as miniature clamps to hold parts together, and they are useful for gluing and soldering wi..
₹45 ₹59
Brand: FlyRobo
Model: FRL-02-950
The 8x5mm ZT PU Pipe Tube is a durable, flexible tubing made from high-quality polyurethane material. Its 8mm outer diameter and 5mm inner diameter make it ideal for applications requiring compact and efficient air or fluid flow. Known for its excellent abrasion resistance, it is suitable for pneuma..
₹45
Brand: FlyRobo
Model: FR-07-742
PG29 Waterproof IP68 Nylon Plastic Cable Gland Connector is used for fixing cables. It has a waterproof design of the clamping die and rubber part. Locknut, main body, and sealing nut are made of high-quality nylon.
Features:
Easy to install, help you clamping cable.
It provides strain re..
₹45 ₹99
Brand: FlyRobo
Model: FR-01-654
The raindrop sensor module is used for rain detection. It is also for measuring rainfall intensity. The module includes a rain board and a control board that is separate for more convenience. It has a power indicator LED and an adjustable sensitivity though a potentiometer.
The module is based on..
₹45 ₹99
Brand: FlyRobo
Model: FR-07-051
This is a Right Angle DC 5.5*2.5mm Power Adapter Charger Cable. This connector is a 90-degree DC Jack male connector. It fits with a 2.5mm DC jack of a female connector.
Features:
This connector is a 90-degree.
Compatible with 5.5mm jacks that have a 2.5mm center pole diameter.
Great ..
₹45
Brand: FlyRobo
Model: FR-06-458
The T8 Lead Screw Round Flange Nut is a precision-engineered component designed for use with T8 lead screws, ensuring smooth and efficient linear motion. Featuring an 8mm pitch, it provides a balanced combination of speed and precision for motion control applications. Made from durable materials, it..
₹45
Brand: FlyRobo
Model: FR-06-361
100k NTC 3950 Thermistor with 1-meter cable and has a DuPont end which is mainly used for 3D printers. The thermistor is a thermally sensitive resistor known for exhibiting a large change in resistance with only a small change in temperature.
Features:
Cable Length: 1Meter
High resist..
₹45 ₹99
Brand: FlyRobo
Model: FR-01-212
This is an 18mm x 13mm x 6mm (LxWxH) Aluminum Heatsink which can be used for multipurpose applications. The aluminum heat sink reduces the risk of hardware failure because of overheating.
Features:
It absorbs heat quickly.
This heatsink with Thermal conductive double-sided tape, which is ..
₹45 ₹69
Brand: FlyRobo
Model: FR-02-752
For connecting lipo batteries, this JST-XH 2S Wire Extension 20cm is frequently used, particularly for RC helicopters, aeroplanes, cars, racing quadcopters, and multirotors.
Because of the balance lead on a lipo battery is significantly shorter than the charging lead, using this Extension Lead to..
₹45 ₹49
Brand: FlyRobo
Model: FR-05-626
The BTA41-600B Thyristor is a high-voltage, high-current silicon-controlled rectifier (SCR) designed for industrial applications. With a maximum repetitive peak off-state voltage of 600 volts, it efficiently handles power control tasks in various circuits. Its robust construction ensures reliable pe..
₹46 ₹55
Brand: FlyRobo
Model: FR-01-760
This Matrix Keypad 4 X 4 has 16 buttons, arranged in a telephone-line 3x4 grid with a column of 4 characters (A, B, C, and D). The keys are connected into a matrix, hence only 8 microcontroller pins (4-columns and 4-rows) are required to scan the pad.
This 16-button keypad provides a useful huma..
₹46 ₹109
Brand: FlyRobo
Model: FR-07-057
This is a 120 Teeth Plastic Gear Model Toy DIY. These gears come with a standard pitch of 0.5 mod and are compatible with each other.
Features:
Aperture: 1.9mm
Number of Teeth: 120T
High-Quality Plastic Gear for DIY Science Projects and Robotics.
It is useful to design any electro-mec..
₹46 ₹75
Brand: FlyRobo
Model: FR-01-924
4 in 1 USB Adapter Board is a simple interface converter. It includes 4P Terminal, Micro USB female, Type-C USB female, Types A USB male, and Type-A USB female. It can achieve mutual conversion between these five interfaces. It can be used as a voltage interface converter or as a data interface conv..
₹46 ₹99
Brand: FlyRobo
Model: FR-06-319
20 Tooth 6.35mm Bore GT2 Timing Aluminum Pulley works with a GT2 6mm wide timing belt. This pulley has 20 teeth and a 6.35mm inner bore. Two set screws can be used to attach it firmly.
Features:-
GT2 belts and pulleys offer excellent precision.
Very light and very durable.
High-quality ..
₹46 ₹134
Brand: FlyRobo
Model: FR-07-619
The DIY 5MM Flashing LED Board Kit is perfect for electronics enthusiasts and beginners alike. This kit includes all the necessary components to build a fun and educational LED circuit board. Once assembled, the LEDs flash in a captivating sequence, demonstrating basic electronic principles.
The ..
₹46 ₹49
Brand: FlyRobo
Model: FR-01-887
KY-025 Reed Sensor Module, an electrical switch consisting of a pair of contacts on ferrous metal reeds. It gets operated by the applied magnetic field. When the device is exposed to a magnetic field, the two ferrous materials inside the switch pull together and the switch closes. When the magnetic ..
₹46 ₹69
Brand: FlyRobo
Model: FR-01-877
The L9110S Dual Channel Motor Driver Module is a compact board that can be used to drive very small robots.
This tiny module has two independent L9110S motor driver chips which can each drive up to 800mA of continuous current. The boards can be operated from 2.5V to 12V enabling this module to be..
₹46 ₹98
Brand: FlyRobo
Model: FR-01-871
Description:
Materials: Thin Film Packaging
Performance: Precision
Rating: 1 (W)
Frequency characteristics: Low Frequency
Temperature coefficient: NTC
Size: 25mm
Feature:
MF5B series products for synthetic fuses thin-film encapsulation type
Insulating film packaging, the..
₹46 ₹79
Brand: FlyRobo
Model: FR-02-555
DF13 4 Pin Flight Controller communication cable uses the Hirose DF13 series connector. It is typically used between the PixHawk and the GPS receiver module.
Features:
Brand new and high quality
Length : 20cm
Width and Height of plug: 6 x 2.5 mm
Good temperature resistive
Silicon f..
₹46 ₹49
Brand: FlyRobo
Model: FR-05-899
We are proud to present the ultimate 5D Rocker Joystick for smooth control and navigation: the Five Direction Navigation Button Module. With its dynamic five-way directional input and precision and versatility design, this small module makes it easy to navigate in any direction.
Utilize our Five ..
₹46 ₹99
Brand: FlyRobo
Model: FR-07-409
2S 7A 8V 18650 Lithium Battery Charger Board Protection Module has the main IC using original “precision” imported components. With overcharge, over-discharge, over current, short circuit protection function, for a variety of different shapes of 3.7V capacity lithium batteries. Compact size, suitabl..
₹47 ₹119
Brand: FlyRobo
Model: C-1103
B103 10K Dual Channel Straight Sliding Potentiometer whose resistance can be varied by moving the handle linearly from one end to another. It is a 10K Linear Potentiometer, which means when the handle is at one end the resistance is 0 ohms. Moving the handle towards the other end will change the res..
₹47 ₹189
Brand: FlyRobo
Model: FR-01-988
USB Charging Discharge Resistance Current Detection Load Tester can easily test the mobile power charging treasure, cell phone charger, USB power output current is standard, as long as the resistance USB port to the above line.
And can carry on an aging test to mobile power and USB power adapter..
₹48 ₹129
Brand: FlyRobo
Model: FR-01-055
This is 1.5V 1.8V 2.5V 3V 3.3V 3.7V 4.2V to 5V DC-DC DC Boost Converter Step-Up Module. It boosts the voltage level and provides the amplified stabilized 5V output.
5V output version:
Starting voltage 0.8V, the output current 7mA
Input 1-1.5V, output 5V, 40-100mA;
Input 1.5-2V, output 5..
₹48
Brand: FlyRobo
Model: FR-06-385
This is a 3D Printer CNC Lead Copper Nut 2x2mm. It is used with Lead Screw in general machine tools such as 3D printing.
Features:
Made from brass and is very reliable in linear motion applications.
Provides easy to install and convenient to use.
Not compatible with 8mm lead screw and 2..
₹48 ₹109
Brand: FlyRobo
Model: FR-07-450
This is 4 x 1.5V AA Battery Holder can hold 4 batteries of 1.5v AA which can make a 4.5 V rechargeable battery pack from NiMH / NiCd cells. The battery holder puts the batteries in series so that you have 4 x the voltage of an AA battery. (approx. 4.5V)
Features:
Battery type: AA.
The wir..
₹48 ₹56
Brand: FlyRobo
Model: FR-07-747
Hexagonal Cross Wrench Sleeve Nut Tool is for M2, M2.5, M3, and M4 screw nut. It is made of hard steel, lightweight, high strength, corrosion resistance, durable, long time for use. It is suitable for M2, M2.5, M3, and M4 Hex Nut for quick release as well as the fitting purpose. It can be also usefu..
₹48 ₹78
Brand: FlyRobo
Model: FR-05-612
The LM2576 is a voltage Regulator IC, it uses the Buck-converter topology to step-down and regulates higher level voltage values to a lower level. It is of non-sync type and can take in an input voltage 40V maximum and source an output current of 3A maximum with a peak efficiency of 90%.
App..
₹48 ₹49
Brand: FlyRobo
Model: FR-01-946
MAX3232 RS232 to TTL Serial Port Converter Module is based on Max3232 IC to convert RS232 level to TTL level easily. The board has a DB9 connector soldered at one end, and four header pins with jumper cables at the other end. The jumper cables enable to connect the wires to a breadboard or a microco..
₹48 ₹85
Brand: FlyRobo
Model: FR-01-730
NE555 Frequency Adjustable Pulse generator Module utilizes the NE555 timer IC to generate pulses from about 4Hz to 1.3Khz. It generates a square wave signal used for experimental development or driving a stepper motor, it would be also a good choice for users learning& experiencing the analog RC cir..
₹48 ₹83
Brand: FlyRobo
Model: FR-05-357
Relay is an electromagnetic device that is used to isolate two circuits electrically and connect them magnetically. They are very useful devices and allow one circuit to switch to another one while they are completely separate. They are often used to interface an electronic circuit (working at a low..
₹48 ₹59
Brand: FlyRobo
Model: FR-07-461
This is a BMS with a 10A current and 7.4V-8.4V voltage rating to charge 2 cells of Li-ion cells. Two batteries (18650) can be connected simultaneously to the HX-2S-D01 charge-discharge controller module. The module has protection against short circuits, overcharges, and over-discharges.
Features:..
₹48 ₹139
Brand: FlyRobo
Model: FR-06-372
M6x50mm Nozzle Throat with Teflon Tube is made from high-quality stainless steel, using stainless steel heat transfer is slow and partial cutting measures, which can effectively prevent the quantity of heat, uploading, and avoid the problem of the expansion of the incoming material in advance. PTFE ..
₹48 ₹119
Brand: FlyRobo
Model: FR-07-062
This is an assorted pack of 15 different commonly used plastic gears. It includes all types of gears of different sizes like spindle gears, worm gears, rack, and pinion gears, pulleys, and belts, bevel gears, etc. It is perfect for use in DIY Science Projects and Robotics.
Features:-
High-Q..
₹48 ₹99
Brand: FlyRobo
Model: FR-01-068
This is DC-DC 6-18V to 5V 3A USB Output Step Down Power Charger Buck Converter, which supports 6-18V voltage input and 5V 3A output with input polarity reverse protection, and output overvoltage protection, short circuit protection.
Features:
A compact and simple to use.
It has a high-qua..
₹49 ₹79
Brand: FlyRobo
Model: FR-01-312
Flex Cable will let you swap out the stock 500mm long flex cable from a Raspberry Pi Camera for a different size. Works great, just carefully open the connector on the Pi and slip this one in.
Features:
Easy to use.
Easily replaceable.
Applications:
Displays, PC and Computers, ..
₹49 ₹249
Brand: FlyRobo
Model: FR-02-431
This vibration motor is a very powerful and user-friendly motor, which can be used with a variety of products.
This includes pagers, GPS devices, mobile phones, or even toys.
Features:
Small Compact Size
Metal Body
Power: [email protected]
Speed 19000RPM
Powerful Motor
Packag..
₹49
Brand: FlyRobo
Model: FR-04-247
This is 13A XE-3-01E Electric Kettle Thermostat Switch. It is widely used in household electric kettles, electrical motors, and electrical equipment, such as washing machine motors, air conditioning fan motors, transformers, electric heating appliances, etc.
Features:
Type: Electric Kettle ..
₹49 ₹79
Brand: FlyRobo
Model: FR-02-481
Introducing the 1pcs 8060 Propeller (CCW only), which is the ideal addition to improve your RC flying abilities.
This propeller offers the best performance and longevity due to its precision engineering and use of premium materials. Its unique counter-clockwise (CCW) rotation guarantees a smooth ..
₹49
Brand: FlyRobo
Model: F-1927
Description:
This is 40pcs 20cm female to female color breadboard jumper cable dupont wire for Arduino
High quality and in good working condition
Durable and reusable
Easy to install and use
A popular choice for construction or repair
Be used for electronic project and Genuine Arduino produc..
₹49
Brand: FlyRobo
Model: F-1926
Description:
This is 40pcs 20cm male to female color breadboard jumper cable dupont wire for Arduino
40pcs chromatic male to female color jumper cable
High quality and in good working condition
Durable and reusable
Easy to install and use
A popular choice for construction or repair
Be used ..
₹49
Brand: FlyRobo
Model: F-1925
Description:
This is 40pcs 20cm male to male color breadboard jumper cable Dupont wire for Arduino
40pcs chromatic color male to male jumper cable
High quality and in good working condition
Durable and reusable
Easy to install and use
A popular choice for construction or repair
Be ..
₹49
Brand: FlyRobo
Model: FR-06-450
This is 20pcs 2*40mm Rubber Transmission Belt. These belts are made of high-quality rubber, have strong wear resistance, not easy to deformation.
Features:
Easy to install
Made of high-quality rubber material
Suitable for model toy cars with the pulley.
Package Includes:
1 x 20p..
₹49
Brand: FlyRobo
Model: FR-02-257
Here it is: the 25cm Battery Belt, the best portable power source for your electronics! Convenience and versatility are the design features of this robust and small battery belt.
Its 25cm length makes it the ideal size for safely storing your batteries and guaranteeing a dependable power source n..
₹49 ₹55
Brand: FlyRobo
Model: FR-07-459
3 x AAA Black Cylindrical Battery Holder for Flashlight Lamp. Just connect three AAA batteries together in Series and output 4.5V voltage.
Features:
It can hold 3x AAA batteries.
The metal column in the positive can be bounced to fit the devices.
Simple to use.
Package Includes:
..
₹49
Brand: FlyRobo
Model: FR-01-404
40mm Fan 3 Blade Plastic 3 Vane Propeller Paddle 40mm Diameter For 2mm DC Brushless Motor Shaft Hole Toy Marine Boat
40mm Ship Power Boat Three Leaf Propeller Fan Nylon RC Boat Propeller
40mm Fan 3 Blade Plastic 3 Vane Propeller Paddle 40mm Diameter For 2mm DC Brushless Output Shaft Hole Toy ..
₹49
Brand: FlyRobo
Model: FR-07-170
heat shrink tubing provides electrical insulation, mechanical protection, sealing, and strain relief, and it can also be used to identify components and wires, creating a functional, professional appearance of the assembly.
Length: 1 Meter
Width: 55mm
Package Includes:-
1 X 55mm1-Meter P..
₹49
Brand: FlyRobo
Model: FR-01-715
Rotary Encoder Rotary Encoder Module is an incremental electro-mechanical device that converts the angular position or motion of a shaft or axle to digital code. The output of incremental encoders provides information about the motion of the shaft, which is typically further processed in processor/c..
₹49 ₹89
Brand: FlyRobo
Model: FR-06-455
The T6 Openbuilds Lock Collar is a precision-engineered component designed to secure shafts and rods in 3D printers and CNC machines. Made from durable aluminum, it provides reliable grip to prevent axial movement, ensuring stability in linear motion systems. With its compact design, it fits seamles..
₹49
Brand: FlyRobo
Model: FR-05-757
This is a Universal PCB Prototype Board Double-Side 7 X 9 CM High-quality universal prototyping board with standard 0.1″ spacing through holes.
High-quality 7 X 9 CM FR4 material, Double-sided, HASL, NC CNC drilled.
Features:
Dimension: 7 X 9 CM
Base Material FR4
Copper Thickness 1-4..
₹49 ₹89
Brand: FlyRobo
Model: FR-01-839
This simple 8 LED Output Board - Sink, offers a convenient way to monitor or display the output of various I/O pins for your project.
Package Includes:
1 x 8 Channel LED Display Board...
₹49 ₹99
Brand: FlyRobo
Model: FR-07-843
90 Degree DC Jack Female to Male Transfer Head has a Male DC head of 5.5*2.5mm and a Female DC head of 5.5*2.1mm. This is a general-purpose connector to be used in a variety of applications.
It is suitable for laptops, Android tablets, CCTV surveillance cameras, MP3, MP4, led lights, Router, Mini..
₹49
Brand: FlyRobo
Model: F-7171
The 90mm 1-Meter PVC Heat Shrink Sleeve is a transparent, durable solution for insulating and protecting electrical connections. Its clear design allows for easy inspection while providing a tight, secure fit around cables and components. Ideal for bundling wires or protecting connectors, this sleev..
₹49
Brand: FlyRobo
Model: FR-07-216
DC 5.5x2.1mm Male to Female Plug Connector Power Extension Cable has one Female connector and 1 Male connector. It works perfectly for any device that requires a power adapter with a 2.1mm x 5.5mm plug.
Features:
Type: 5.5*2.1mm DC Power Male to Female Connector Cable
Cable Length: 0.5 Me..
₹49 ₹55
Brand: FlyRobo
Model: FR-04-292
Specification:
Motor size: 30x24mm
Shaft diameter: 2mm
Axial length: 9mm
Voltage: 12V
Package Includes:
1 x DC 5v Motor for Arduino DIY Smart Car.
..
₹49
Brand: FlyRobo
Model: FR-05-850
The 20MM EC11 Potentiometer Encoder Switch is here, offering a small-footprint solution for precise control. This adaptable encoder switch, with a 20MM diameter for simple integration into a range of applications, is made to elevate your electronic projects.
This potentiometer encoder switch has ..
₹49 ₹69
Brand: FlyRobo
Model: FR-05-614
HT12D is a decoder IC for remote control applications, commonly in Radiofrequency (RF) wireless applications, and it is 2 series decoders. We can transmit 12 bits of parallel data serially by using HT12E and HT12D. HT12D is a simple Decoder IC that converts serial data to its input through RF to 12 ..
₹49
Brand: FlyRobo
Model: FR-05-615
HT12E is an encoder integrated circuit of 212 series of encoders. They are paired with 212 series of decoders for use in remote control system applications. It is mainly used in interfacing RF and infrared circuits. The chosen pair of encoder/decoder should have the same number of addresses and data..
₹49
Brand: FlyRobo
Model: FR-06-247
LM8UU 8mm Linear Motion Bearings are perfect for linear motion on your 3D Printer, CNC, or other applications. It provides a precise, safe, and reliable linear motion system.
This is Linear Motion Bearing closed type ball bushing has an 8mm bore and 15mm outer diameter is suitable for use in a mo..
₹49 ₹108
Brand: FlyRobo
Model: FR-06-377
M6X20 1.75mm Extruder Feeding Nozzle Throat is used for 3D printer parts and CNC Machines.
Features:
Material: Brass
Suitable for 1.75mm filament.
M6 x 20 Bore: 3.2mm
Overall Length: 20mm, one end 11mm, the other end 8mm, the middle end is a hex nut.
Package Includes:
1 x M6X2..
₹49
Brand: FlyRobo
Model: FR-05-992
A 4×4 matrix keypad consisting of microswitch buttons. The module has four holes 3mm (M3) holes for mounting. The pin designations on each PCB are shown on each PCB. Four pins are thus used as an ‘x’ coordinate and the other 4 as a ‘y’ coordinate.
The module is already equipped with soldered pin-he..
₹49
Brand: FlyRobo
Model: FR-01-598
MC-38 Wired Door Window Sensor Magnetic Switch Home Alarm System produces the signal when moved away from each other which can be fed to the microcontroller to perform the desired action as per requirement. It is used as a door or window security alarm.
It is trigger by the magnet. When the magne..
₹49 ₹88
Brand: FlyRobo
Model: FR-05-400
A capacitor is a passive two-terminal electrical component used to store energy electrostatically in an electric field. It includes 20 capacitor values, 5 pieces of each type with a total of 100 capacitors.
Features:
Multiple Assorted Capacitors
Quantity 100pcs (5 each per Value)
Capaci..
₹49
Brand: FlyRobo
Model: FR-07-522
This is XY-016 DC-DC Step Up 2A 5V/9V/12V/28V Power Module with Micro USB. The whole network's smallest adjustable boost module can be easily installed in a variety of small pieces of equipment.
This Multipurpose tiny and very cheap voltage booster can be very useful in your various DIY project a..
₹49
Brand: FlyRobo
Model: FR-05-303
The PCB Tungsten Steel Twist Drill (0.10mm) is presented: Your go-to source for precise drilling. This twist drill's outstanding tungsten steel construction ensures unmatched durability and performance. It is an excellent option for PCB construction and other delicate projects because of its ultra-f..
₹49
Brand: FlyRobo
Model: FR-07-813
Quickfix Soldering Flux Paste is made with Superior Quality Activators and Additives. This enhances the performance of soldering components.
Solder Paste leaves No Black Marks, creates lesser smoke, and leaves No residue during the process of Soldering. Developed with High-Quality Rosin and excel..
₹49 ₹59
Brand: FlyRobo
Model: FR-05-358
Relay is an electromagnetic device that is used to isolate two circuits electrically and connect them magnetically. They are very useful devices and allow one circuit to switch to another one while they are completely separate. They are often used to interface an electronic circuit (working at a low..
₹49 ₹79