-50 %
Out Of Stock
Brand: FlyRobo
Model: FR-01-216
This is a Wireless Charging Power Supply Coil that has a 20mm outer diameter and has 20uH coil inductance.
Features:
Model: XKT-L10
Wire diameter: 0.3mm
Coil outer diameter: 20mm
Coil thickness:0.9mm
Coil inductance:20uH
Package Includes:
1 x XKT-L10 20mm20uH Wireless Charg..
₹49 ₹99
-37 %
Brand: FlyRobo
Model: FR-01-702
This is a breakout board that mounts a 74HC4067 which is a 16-channel analog multiplexer/demultiplexer that can route both analog and digital signals in both directions.
1 of 16 input channels can be routed to 1 output or 1 input can be routed to 1 of 16 output channels. It can handle analog sig..
₹49 ₹79
-44 %
Brand: FlyRobo
Model: FR-06-447
The Aluminum Alloy Coupling 5x6mm for 3D Printers and CNC Machines are lightweight coupling and exhibits more strength in class. This type of coupling is very common and found in a wide range of CNC Machines.
The bore diameters of this coupling are d1=5mm and d2=6mm. Each coupling is equipped wit..
₹49 ₹89
-37 %
Brand: FlyRobo
Model: FR-01-552
Micro SD Card Reader Module also called Micro SD Adaptor which is designed for dual I/O voltages. The Module is a simple solution for transferring data to and from a standard SD card. The pinout is directly compatible with Not only Arduino but can also be used with other microcontrollers.SD module h..
₹49 ₹78
-37 %
Brand: FlyRobo
Model: FR-02-556
DF13 5 Pin Flight Controller communication cable uses the Hirose DF13 series connector. It is typically used between the PixHawk and the GPS receiver module.
Features:
Brand new and high quality
Length : 20cm
Width and Height of plug: 7 x 2.5 mm
Good temperature resistive
Silicon fl..
₹50 ₹79
-28 %
Brand: FlyRobo
Model: FR-02-074
The 3045 Triblade Blue Propeller Set of 4 is an ideal choice for drone enthusiasts seeking enhanced performance and stability. Designed with three blades per propeller, it ensures greater thrust and improved control during flight. Crafted from durable materials, these propellers resist wear and brea..
₹50 ₹69
-37 %
Out Of Stock
Brand: FlyRobo
Model: FR-01-728
This is PCB Antenna having a frequency of 704-960 MHz and 1710 - 2700 MHz. PCB Antenna is a wireless device to receive and transmit signals, it has been widely used in telecommunication to communicate. One of the main reasons to use a PCB antenna is the reduced overall cost of the radio module. you ..
₹50 ₹79
-28 %
Brand: FlyRobo
Model: FR-05-355
Relay is an electromagnetic device that is used to isolate two circuits electrically and connect them magnetically. They are very useful devices and allow one circuit to switch to another one while they are completely separate. They are often used to interface an electronic circuit (working at a low..
₹50 ₹69
-55 %
Brand: FlyRobo
Model: FR-01-644
The sound module is the most sensitive to the environment sound intensity, commonly used to detect the intensity of the sound of the surroundings. When module in the intensity of the sound environment can not reach a set threshold, the OUT will output a high level, when the intensity of the sound fr..
₹50 ₹109
-50 %
Brand: FlyRobo
Model: FR-06-233
This 20 Tooth 7mm Bore GT2 Timing Idler Aluminum Pulley works with GT2 6mm wide timing belt; it will work perfectly with GT2 pulley-belt sets we are selling on our site. This idler is a good match for 20T GT2 driving Timing Belt Pulley.
This pulley has 20 teeth and an 8mm inner bore. Two set scre..
₹50 ₹99
-37 %
Brand: FlyRobo
Model: FR-05-822
Let your world shine with our 20 Lamp Beads LED Lighting Board!
Our cutting-edge LED Lighting Board, which includes 20 high-performance lamp beads, will upgrade your lighting options. With its stunning illumination and energy-efficient construction, this small but mighty board is intended to chan..
₹50 ₹79
-61 %
Brand: FlyRobo
Model: FR-06-386
This is a 3D Printer CNC Lead Copper Nut 2x2mm. It is used with Lead Screw in general machine tools such as 3D printing.
Features:
Made from brass and is very reliable in linear motion applications.
Provides easy to install and convenient to use.
Not compatible with 8mm lead screw and 2..
₹50 ₹129
-28 %
Brand: FlyRobo
Model: FR-01-957
Features:
Special power module for breadboard, compatible with 5V and 3.3V.
Apply to the MB102 breadboard, very useful for Arduino breadboard projects.
DC 6.5-12V or USB power supply the input voltage.
The output voltage can be switched between 3.3V and 5V.
Two-way independent control ..
₹50 ₹69
Out Of Stock
Brand: FlyRobo
Model: FR-07-137
This heat shrink has exceptional insulation characteristics, excellent stress control properties; long-term weather and regular wear and tear resistance, ease of installation, and reliable performance even in the harshest of situations. These High performance 2:1 heat shrink material tubes, bundles..
₹50
Out Of Stock
Brand: FlyRobo
Model: FR-07-161
This heat shrink has exceptional insulation characteristics, excellent stress control properties; long-term weather and regular wear and tear resistance, ease of installation, and reliable performance even in the harshest of situations. These High performance 2:1 heat shrink material tubes, bundles,..
₹50
-23 %
Brand: FlyRobo
Model: FR-08-340
The W25Q128JVPIQ is a high-performance 128Mbit (16MB) Serial Flash Memory Chip, operating at 3V with a small SMD package, ideal for compact electronic designs. It features a Quad-SPI interface, delivering fast read/write speeds suitable for demanding applications like IoT devices, embedded systems, ..
₹50 ₹65
-27 %
Brand: FlyRobo
Model: FR-08-053
The CBB61 1.5UF 450V Fan Starting Capacitor is designed for use in AC motor fans and electric pumps. It provides reliable starting power with a capacitance of 1.5 microfarads and a voltage rating of 450V. The capacitor features a compact, lightweight design with durable plastic casing, ensuring long..
₹51 ₹69
-49 %
Out of Stock
(Restock: 15-08-2025 to 19-08-2025)
(Restock: 15-08-2025 to 19-08-2025)
Brand: FlyRobo
Model: FR-06-396
This GT2 Timing Idler Aluminum Pulley works with GT2 6mm wide timing belt; it will work perfectly with GT2 pulley-belt sets. This idler is a good match for 16T GT2 driving Timing Belt Pulley.
It is widely used in milling machines, 3D Printer, gear shapers, drilling machines, CNC engine lathe, hob..
₹51 ₹99
-32 %
Brand: FlyRobo
Model: FR-04-304
The 150 RPM Single Shaft L- Shaped BO Motor motor gives good torque and rpm at lower operating voltages, which is the biggest advantage of these motors. It is an alternative to our metal gear DC motors. It comes with an operating voltage of 3-6V and is perfect for building small and medium robots.
..
₹51 ₹75
-48 %
Brand: FlyRobo
Model: FR-07-420
5V 4010 Cooling Fan is a small but powerful fan. The cooling fan finds its use as an exhaust fan on the Raspberry pi case. It maintains the temperature of the extruder, which results in good heat dispersion and wonderful performance. it's also compatible with raspberry pi.
The cooling fan operate..
₹51 ₹99
-48 %
Brand: FlyRobo
Model: FR-01-985
Features:
With optocoupler isolation, the control signal and the power of the controlled device are isolated, which greatly increases the rigidity of the interference.
Compatible with MCU and control board, 3V or 5V signal
High-level start, low-level stop, PWM speed regulation
Widely use..
₹51 ₹99
-53 %
Brand: FlyRobo
Model: FR-01-816
The default function of the capacitor touch dimmer is a switch, dimming, with brightness memories LED touch dimming. It will light slowly when turning on the lights, and become dark slowly when turn off, which effectively avoids the stimulation to eyes.
The lamp brightness can be adjusted by..
₹51 ₹109
-35 %
Out Of Stock
Brand: FlyRobo
Model: FR-01-969
This is the antenna for GSM Modems. A small, high-quality, quad-band, standard SMA terminated, cellular antenna. Has a length of 4 inches.
Specifications:
GSM/850E: 824 to 894MHz
GSM: 880 to 960MHz
DCS: 1710 to 1880MHz
PCS: 1850 to 1990MHz
Antenna Length: 100 mm( 4" )
Connec..
₹51 ₹79
-66 %
Brand: FlyRobo
Model: FR-01-503
5A Single Phase AC Current Sensor Module can measure within 5A current communication, corresponding to output analog quantity that can be adjusted. It measures AC currents less than 5A, the corresponding analog output 5A/5mA.
Features:
Onboard sampling resistor.
5A range of single-phase ..
₹51 ₹148
-21 %
Brand: FlyRobo
Model: FR-06-453
This is 36 Teeth MK7/MK8 Stainless Steel Extruder Feed Wheel. It gives a smooth and reliable printing experience. This module helps to steadily feed your filament. A good replacement for MK7/MK8 extruders where the drive wheel has worn out.
Features:
Material: Stainless Steel
No. of teeth..
₹51 ₹65
-56 %
Brand: FlyRobo
Model: FR-06-346
Timing belts are a fantastic way to transfer rotational motion (from a stepper motor) into linear motion (along a rail) and these GT2 belts are excellent for the task. They have a special profile with rounded teeth which reduces backlash.
This is a white open-loop timing belt 1 meter long. It is..
₹51 ₹118
-35 %
Brand: FlyRobo
Model: FR-06-442
The Aluminum Alloy Coupling 4x4mm for 3D Printers and CNC Machines are lightweight coupling and exhibits more strength in class. This type of coupling is very common and found in a wide range of CNC Machines.
The bore diameters of this coupling are d1=4mm and d2=4mm. Each coupling is equipped wit..
₹52 ₹79
Brand: FlyRobo
Model: FR-05-758
This is a Universal PCB Prototype Board Double-Side 6 x 8 cm High-quality universal prototyping board with standard 0.1″ spacing through holes.
High-quality 6 x 8 cm FR4 material, Double-sided, HASL, NC CNC drilled.
Features:
Dimension: 6 x 8 cm
Base Material FR4
..
₹52
Brand: FlyRobo
Model: FR-05-631
The AMS1117 series of adjustable and fixed voltage regulators are designed to provide up to 1A output current and to operate down to 1V input-to-output differential. The dropout voltage of the device is guaranteed maximum 1.3V, decreasing at lower load currents. On-chip trimming adjusts the ref..
₹52
-47 %
Brand: FlyRobo
Model: FR-08-335
The CH340B SOP16 is a compact USB-to-serial port IC that offers reliable data transmission and seamless integration for various applications. It supports UART, RS232, and RS485 interfaces, making it versatile for microcontroller communication. With a built-in crystal oscillator and USB transceiver, ..
₹52 ₹99
-61 %
Brand: FlyRobo
Model: FR-01-861
Correlation photoelectric Infrared count slot sensor module is a high-quality infrared Counter module at a very cheap price which comes with tiny size and integrated LM 393 chip.
Features:
The width of the optical coupling slot: 5mm
With a signal output indication.
Single signal output
..
₹52 ₹132
Brand: FlyRobo
Model: FR-01-376
The DHT11 Digital Relative Humidity and Temperature Sensor Module is a basic, ultra-low-cost sensor for measuring temperature and humidity. It provides calibrated digital output and uses a single-wire digital signal for data transmission. The sensor is capable of detecting humidity levels from 20% t..
₹52
-47 %
Brand: FlyRobo
Model: FR-05-927
A sturdy and dependable answer to your electrical connection needs is the GX16 10-pin Female Core Aviation Socket Connector. This connector, which was made using premium materials, guarantees stable and safe connections in industrial and aviation applications.
It is ideal for many tasks due to it..
₹52 ₹99
-15 %
Brand: FlyRobo
Model: FR-02-758
The MT60 3 Pin Female Connector is an essential component for ensuring reliable and secure electrical connections in a wide range of applications. Crafted with precision and high-quality materials, this connector is designed to deliver optimal performance and longevity, making it a dependable choice..
₹52 ₹61
-56 %
Out of Stock
(Restock: 15-08-2025 to 19-08-2025)
(Restock: 15-08-2025 to 19-08-2025)
Brand: FlyRobo
Model: FR-01-574
TXS0108E 8 Channel Bi-Directional Logic Level Converter Module is a small device to convert the 1.8V 3.3V 5V logic level mutually enable you to successfully set your high and low voltages and step up and down between them safely on the same channel. It is a high-speed full-duplex 8 channel logic lev..
₹52 ₹119
-11 %
Out Of Stock
Brand: FlyRobo
Model: FR-05-940
We are pleased to present our Mini USB 2.0 TF SD Card Reader, the ideal way to transfer files between your devices and memory cards. With USB 2.0 connectivity, this lightweight and small reader offers dependable and quick data transfer for TF and SD cards. You can instantly access your data by inser..
₹52 ₹59
-34 %
Brand: FlyRobo
Model: FR-05-256
Introducing the 20mm Humidifier Microporous Nebulizer Tablet: Revolutionize your humidification experience with this compact powerhouse. Crafted with precision, its microporous design ensures efficient dispersion of moisture, creating a soothing atmosphere in any room. Say goodbye to dry air and hel..
₹52 ₹79
-65 %
Out Of Stock
Brand: FlyRobo
Model: FR-01-207
This is Clear Plastic Case for Arduino UNO R3. The case is a two-piece injection-molded enclosure that holds together around the Arduino and it holds the Arduino firmly in place. As it is transparent is perfect for letting you see your Arduino Uno and make any needed adjustments easily.
Features:..
₹52 ₹149
-45 %
Brand: FlyRobo
Model: FR-06-212
The Plastic Wheel Idler Pulley from Openbuilds is here to meet all of your precision motion control needs!
Our Plastic Wheel Idler Pulley is created to offer dependable performance in a variety of applications. This idler pulley is the ideal option to keep your belts operating smoothly whether yo..
₹53 ₹95
-74 %
Brand: FlyRobo
Model: FR-01-879
4 Power Indicator Battery Detection Module has a high precision voltage detection chip. 4 ranks LED light indicator to show different electric quantities including red, yellow, yellow, green, respectively represent 20%, 50%, 80%, 100%. A testing Interface and two installing holes for fixing the devi..
₹53 ₹199
-59 %
Brand: FlyRobo
Model: FR-07-088
GX16 2-Pin Aviation Socket Plug, also known as circular shell connector. It is a panel-mount type connector with a male end mounted on the panel and a female connector usually plugs into it. It is used in places where a watertight connection is required.
Features:
Simple to install.
Male ..
₹53 ₹129
-10 %
Brand: FlyRobo
Model: FR-04-299
The 100 RPM Duel Shaft BO Motor motor gives good torque and rpm at lower operating voltages, which is the biggest advantage of these motors. It is an alternative to our metal gear DC motors. It comes with an operating voltage of 3-6V and is perfect for building small and medium robots.
A small sh..
₹53 ₹59
-46 %
Brand: FlyRobo
Model: F-4300
The 200 RPM Dual Shaft BO Motor motor gives good torque and rpm at lower operating voltages, which is the biggest advantage of these motors. It is an alternative to our metal gear DC motors. It comes with an operating voltage of 3-6V and is perfect for building small and medium robots.
A small sh..
₹53 ₹99
-32 %
Brand: FlyRobo
Model: F-1911
Description:
Tie-point 840
Solderless breadboard (GL-12)
Wire size: Suitable for 29-20 AWG wires
Size: About 16.5*5.6*1cm
Package Includes:
1 X GL-12 Breadboard 830 Point Solderless PCB..
₹53 ₹78
-46 %
Brand: FlyRobo
Model: FR-01-975
The LM317 DC-DC converter is an electronic circuit for converting a DC source voltage from one level to a lower level. This module is important in some portable electronic devices such as cell phones and laptops, which are primarily supplied by power from batteries.
The step-down voltage can be ..
₹53 ₹99
-46 %
Brand: FlyRobo
Model: FR-08-308
The MAX3051EKA+T is a high-speed CAN transceiver IC designed for robust communication in automotive and industrial applications. Packaged in a compact SOT23-8 format with printed silk marking "AEKF," it supports data rates up to 1Mbps. The device features fail-safe operation, including short-circuit..
₹53 ₹99
-46 %
Brand: FlyRobo
Model: FR-08-331
The NRF24LE1E QFN32 is a highly integrated wireless transmitter IC chip designed for low-power, high-performance applications. It features a 2.4GHz RF transceiver with an embedded 8-bit microcontroller, offering efficient wireless communication and processing in a single package. The chip supports d..
₹53 ₹99
-44 %
Brand: FlyRobo
Model: FR-07-006
A quality soldering iron stands with a heavy-duty metal base. This model features a reinforced spring safety holder, which prevents flex from getting entangled with spring. This simple soldering iron stand composed of a reinforced spring holder. The base and holder are detachable. A circular cleani..
₹53 ₹94
-46 %
Brand: FlyRobo
Model: FR-01-643
The Sound Detector is a small and very easy to use audio sensing board with three different outputs. The Sound Detector not only provides an audio output, but also a binary indication of the presence of sound, and an analog representation of its amplitude. The 3 outputs are simultaneous and independ..
₹53 ₹99
-64 %
Brand: FlyRobo
Model: FR-07-751
This is a 3.5mm Male Plug to 3 RCA Male Audio Video Cable. All music players with 3.5mm jacks can be connected via the converter cable to speakers with RCA ports. You can enjoy excellent music with your home theatre system or other stereo speakers if you get this practical and simple cable.
Featu..
₹53 ₹149
-22 %
Brand: FlyRobo
Model: FR-05-356
Relay is an electromagnetic device that is used to isolate two circuits electrically and connect them magnetically. They are very useful devices and allow one circuit to switch to another one while they are completely separate. They are often used to interface an electronic circuit (working at a low..
₹54 ₹69
Brand: FlyRobo
Model: F-7132
heat shrink tubing provides electrical insulation, mechanical protection, sealing, and strain relief, and it can also be used to identify components and wires, creating a functional, professional appearance of the assembly.
Length: 1 Meter
Width: 128mm
Thickness of sleeve: 150 micron
Pa..
₹54
Brand: FlyRobo
Model: FR-07-628
The 22mm x 0.12mm Nickel Plated Strip is a high-quality conductive material designed for connecting batteries in parallel configurations. With its optimal width and thickness, it ensures efficient current flow and low resistance for stable performance. The strip is corrosion-resistant, offering dura..
₹54
Brand: FlyRobo
Model: FR-02-741
30cm JR Male to Futaba Female Servo Extension Cable can be used with all servos and ESCs to extend the length of the stock cable. This cable is useful for building RC Cars, Planes, Boats, and Robotics Projects which use servos. It comes with FUTABA - style connectors. This has a male connector on ..
₹54
-45 %
Brand: FlyRobo
Model: FR-01-575
HX711 24 Bit Precision Dual-Channel Module is a Load Cell Amplifier breakout board for the HX711 IC that allows you to easily read load cells to measure weight. This module uses 24 high-precision A/D converter chips HX711. It is specially designed for the high precision electronic scale design, with..
₹54 ₹99
Brand: FlyRobo
Model: FR-05-289
The LM2596S Step-down Power Supply Module is a high-efficiency, DC-DC buck converter that reduces voltage from a higher input to a stable, adjustable output. It supports input voltages from 4V to 40V and offers an adjustable output range from 1.25V to 37V, delivering up to 3A of current. With a high..
₹54
-51 %
Brand: FlyRobo
Model: FR-07-069
XL6009 DC-DC Step-up converter module is a non-isolated step-up (boost) voltage converter featuring adjustable output voltage and high efficiency.
The module uses the second generation of high-frequency switching technology XL6009E1 core chip performance than the first generation technology LM257..
₹54 ₹110
-20 %
Brand: FlyRobo
Model: FR-05-830
Our Silicone Gasket with High Thermal Conductivity is now available!
Our state-of-the-art Silicone Gasket will enable exceptional heat management, unlike anything you've ever experienced. This gasket is made to operate well in difficult thermal situations and is intended for high-performance appl..
₹54 ₹68
-73 %
Out of Stock
(Restock: 15-08-2025 to 19-08-2025)
(Restock: 15-08-2025 to 19-08-2025)
Brand: FlyRobo
Model: D-1228
As a remote 8-bit I/O expander for the I2C bus, the PCF8574 IO Expansion Board is employed. The I2C-bus can support up to 8 PCF8574 IO Expansion Board connections, giving users access to 64 I/O ports.
I2C pin header and an I2C connection are both included on the PCF8574 IO Expansion Board. Theref..
₹55 ₹199
-12 %
Brand: FlyRobo
Model: FR-04-220
Pulley Wheel with 7cm Dia. x 4cm Width is specially designed for conveyor belts. They have a groove running through the middle so that they restrict the belt from slipping. A 4 cm width belt is recommended with this pulley.
Feature and specifications:
Width of pulley : 4 cm
Diameter ..
₹55 ₹62
-8 %
Brand: FlyRobo
Model: FR-04-288
Robot Wheel 10cm Dia. x 2cm Width Wheels for your robot is easy to mount, durable and cheap. These wheels have a 6mm hole for a shaft with a screw for fitting making it very easy to mount on motors.
Features:
High-Quality Material
Light-Weight and Durable
Smooth Surface
Packag..
₹55 ₹59
-15 %
Brand: FlyRobo
Model: FR-04-225
Robot Wheel 11cm Dia. x 2cm Width Wheels for your robot is easy to mount, durable and cheap. These wheels have a 6mm hole for a shaft with a screw for fitting making it very easy to mount on motors.
Specification:
Wheel Dia: 11 cm
Thickness: 2 cm
Hole Di..
₹55 ₹64
-54 %
Brand: FlyRobo
Model: FR-01-605
The 4 Channel Capacitive Touch Sensor Module uses the touch-sensing IC TTP224 to sense the touch input thus making it easy to add capacitive touch input to your project. The touching detection IC is designed for replacing the traditional direct button key with a diverse pad size. The module has 4 to..
₹55 ₹119
-77 %
Brand: FlyRobo
Model: FR-05-346
The 4S-2A | 18650 Polymer Lithium Ion Charger is a versatile charging module designed for 18650 lithium-ion batteries. Featuring a Type-C input, it provides reliable charging with a 4S 14.8V output at 2A, ensuring efficient power delivery. This booster module integrates advanced safety features to p..
₹55 ₹235
-7 %
Brand: FlyRobo
Model: FR-02-640
M5 Propeller Nut Cap CW CCW for 1306 and 3100kv Brushless DC Motor is the set of two different i.e CW and CCW Nut Cap for 1306 and 3100kv brushless motor to be fitted above the propeller.
Propeller nuts of different directions usually come in different colors, such as black and silver for better ..
₹55 ₹59
-31 %
Out Of Stock
Brand: FlyRobo
Model: FR-06-376
Drive Gear Copper Extruder Pulley Bore 5mm Feeder Wheel for 1.75mm/3mm Filament used for 3D Printer and CNC Machines.
Features:
Material: Brass Copper
Bore Diameter: 5mm
Suitable for 1.75mm/ 3.0mm filament.
Package Includes:
1 x Drive Gear Copper Extruder Pulley Bore 5mm Feeder ..
₹55 ₹79
-31 %
Brand: FlyRobo
Model: FR-08-052
The CBB61 1.8UF 450V Fan Starting Capacitor is designed for efficient motor startup in ceiling and exhaust fans. With a capacitance of 1.8 microfarads, it ensures smooth and stable fan operation. Its 450V rating allows for reliable performance in high-voltage environments. The capacitor is encased i..
₹55 ₹79
-61 %
Brand: FlyRobo
Model: FR-06-399
This GT2 Timing Idler Aluminum Pulley works with a GT2 10mm wide timing belt; it will work perfectly with GT2 pulley-belt sets. This idler is a good match for 20T GT2 driving Timing Belt Pulley.
It is widely used in milling machines, 3D Printer, gear shapers, drilling machines, CNC engine lathe, ..
₹55 ₹139
-15 %
Brand: FlyRobo
Model: FR-07-989
The 3Pin RS765/GX12 Aviation Plug Connector Set is a durable, high-quality connector for secure power and signal transmission. Designed with a 12mm threaded locking mechanism, it ensures a reliable connection in demanding environments. The connector is made from metal, providing excellent durability..
₹55 ₹65
Brand: FlyRobo
Model: FR-08-106
The 3S 10A Lithium Battery Protection Board is designed to safeguard three-cell lithium battery packs from overcharging, over-discharging, and short circuits. With a 10A continuous discharge current capability, it ensures reliable performance for high-drain applications. The board features balanced ..
₹55
Brand: FlyRobo
Model: FRC-05-733
Product : LED Diod
Light Colour : White
LED Colour : Transparent
LED Type : 5mm
Product
Wave Length/nm
MCD
Voltage
Current
5mm Yellow
588-590nm
300-400mcd
2.0-2.2v
20..
₹55
Brand: FlyRobo
Model: FR-01-250
Mini DC-DC Boost Step-Up Converter Board Module, 3.7V to 12V A DC-DC Boost step-up converter module is used to increase the voltage and has output voltages of 5V, 8V, 9V, and 12V. The voltage boost converter module produces a consistent 3.7V DC voltage at a range of input voltages between 3.7V and 1..
₹55
-20 %
Brand: FlyRobo
Model: FR-07-825
60W Solder Iron Bit is a plated Pure Copper-based 60W Bit. This Bit is to be used with the Noel Soldering Iron 60W.
This is the Standard Bit that comes with Noel Soldering Iron 60W. This Bit is specially coated with Iron Plating which increases the life of the Soldering Bit by at least 4-5 times..
₹55 ₹69
Brand: FlyRobo
Model: FR-01-905
This is a Universal PCB Prototype Board single-Side 7 X 9 CM High-quality universal prototyping board with standard 0.1″ spacing through holes.
Specification:
Material: Bakelite
Dimension: 7 x 9cm
Thickness: 1.5mm
Hole pitch: 2.54mm
Hole inner diameter: 1.0mm
Package included:
1 X ..
₹55
Out Of Stock
Brand: FlyRobo
Model: FRC-05-725
Features and Specifications :
Product : LED Diod (Light Emitting Diod)
Light Colour : Blue
LED Type : 5mm
Product
Wave Length/nm
MCD
Voltage
Current
5mm Yellow
588-590nm
3..
₹55
-60 %
Brand: FlyRobo
Model: FR-01-829
The DHT11 Temperature And Humidity Sensor Module with LED is a small humidity and temperature sensor that you can connect to your Arduino and get readings for temperature and humidity in the environment. DHT11 can be interface with any microcontroller like Arduino, Raspberry Pi, etc., and get instan..
₹55 ₹139
Brand: FlyRobo
Model: FRC-05-718
Features and Specifications :
Product : LED Diod (Light Emitting Diod)
Light Colour : Green
LED Type : 5mm
Product
Wave Length/nm
MCD
Voltage
Current
5mm Yellow
588-590nm..
₹55
Out Of Stock
Brand: FlyRobo
Model: FR-07-755
Insulated Copper Test Crocodile Clip is fully insulated with a 4mm socket in the handle, offering an easy connection to the test lead, the toothed grip offers good contact on fine wire, with a 10mm jaw opening limit.
Features:
The clip opening is 10mm.
The design of a clip with teeth can ..
₹55
Brand: FlyRobo
Model: FR-07-990
The 2Pin RS765/GX12 Aviation Plug Connector Set is a durable and reliable connection solution, ideal for various electrical and electronic applications. It features a sturdy metal shell for protection and longevity, with secure locking to ensure stable connections. The compact GX12 design allows for..
₹55
-7 %
Brand: FlyRobo
Model: FR-05-694
The IRFP064NPBF is an N-channel MOSFET in a TO-3P package, designed for high-power switching applications. It features low on-resistance (Rds On) for improved efficiency and reduced heat dissipation. With a maximum drain current of 110A and drain-to-source voltage of 55V, it is ideal for power suppl..
₹55 ₹59
-63 %
Brand: FlyRobo
Model: FR-08-348
The MP9943GQ-Z is a high-efficiency synchronous buck converter chip housed in a compact QFN-8 package, designed for embedded systems. It operates with a wide input voltage range of 4.5V to 36V, making it suitable for diverse applications. With a programmable output voltage and up to 3A continuous lo..
₹55 ₹149
-38 %
Out Of Stock
Brand: FlyRobo
Model: FR-08-333
The NRF24L01P-R is a compact 2.4GHz wireless RF receiver chip, housed in a QFN-20 package. It is designed for efficient, low-power wireless communication, supporting data rates of up to 2 Mbps. This chip is ideal for applications such as IoT devices, wireless sensors, and remote controls. It feature..
₹55 ₹88
Brand: FlyRobo
Model: FRC-05-704
Features and Specifications :
Product : LED Diod (Light Emitting Diod)
Light Colour : Red
LED Type : 5mm
Product
Wave Length/nm
MCD
Voltage
Current
5mm Yellow
588-590nm
30..
₹55
-5 %
Brand: FlyRobo
Model: FR-07-200
Features:
H-1 FEET L-1/2 FEET W-200 GM Fast cutting action with black oxide finish
Strips and cuts wire 12-24 gauge
Wire Gauge screw in slot holds stripping die to the proper size for repeated jobs and prevents nipped wire
Sharp cutting edges for all industrial uses.
Package Include..
₹55 ₹58
Brand: FlyRobo
Model: FRC-05-711
Features and Specifications :
Product : LED Diod (Light Emitting Diod)
Light Colour : Yellow
LED Type : 5mm
Product
Wave Length/nm
MCD
Voltage
Current
5mm Yellow
588-590..
₹55
-76 %
Brand: FlyRobo
Model: FR-05-342
The 3S-1A | 18650 Polymer Lithium Ion Charger Type C to 3S 8.412.6V 1A Booster Module is a compact and efficient charging solution. It features a Type C input for modern connectivity, allowing for easy integration with current devices. Designed to charge 18650 lithium-ion batteries, it boosts the ou..
₹55 ₹235
Brand: FlyRobo
Model: FR-04-555
The 400 RPM Dual Shaft BO Motor motor gives good torque and rpm at lower operating voltages, which is the biggest advantage of these motors. It is an alternative to our metal gear DC motors. It comes with an operating voltage of 3-6V and is perfect for building small and medium robots.
A small sh..
₹56
Brand: FlyRobo
Model: FR-06-440
8mm Openbuilds Lock Collar T8 Leadscrew are used to create mechanical stops at any location along a shaft or to secure components to it.
Features:
T8 inner hole 8mm
Made of high-quality Stainless steel material, durable, long-lasting, and rustless.
Suitable for 8mm T8 Lead Screw.
App..
₹56
-43 %
Brand: FlyRobo
Model: FR-06-344
GT2 Rubber Timing Belt is a Closed-loop with 6mm width and 158mm long used for 3d printers. The Grip used in the GT2 system is an extension of the HTD system with greater load-carrying capacity. It is made as a flexible belt with teeth molded onto its inner surface.
Features:
Type: Closed L..
₹56 ₹99
-53 %
Brand: FlyRobo
Model: FR-01-979
The Infrared IR Wireless Remote Control Module Kit for Arduino consists of ultra-thin infrared remote control and 38KHz infrared receiver module. This mini slim infrared remote control with 20 function keys. Its transmit distances up to 8 meters. Ideal for handling a variety of equipment indoors.
..
₹56 ₹119
-60 %
Brand: FlyRobo
Model: FR-07-089
GX16 3-Pin Aviation Socket Plug, also known as circular shell connector. It is a panel-mount type connector with a male end mounted on the panel and a female connector usually plugs into it. It is used in places where a watertight connection is required.
Features:
Simple to install.
Male ..
₹56 ₹139
-76 %
Brand: FlyRobo
Model: FR-05-343
The 3S-2A | 18650 Polymer Lithium Ion Charger Type C to 3S 12.6V 2A Booster Module is a versatile and efficient charging solution. Designed for 18650 lithium-ion batteries, it supports a 3S configuration, ensuring balanced charging. The Type C interface allows for fast and convenient connectivity, w..
₹56 ₹235
-76 %
Brand: FlyRobo
Model: FR-05-347
The 4S-4A | 18650 Polymer Lithium Ion Charger is a versatile and efficient charging module designed for 18650 batteries. It features a Type C input, providing modern connectivity and convenience. This booster module outputs a stable 14.8V at 4A, ensuring fast and reliable charging for 4S battery con..
₹56 ₹235
-37 %
Brand: FlyRobo
Model: FR-06-437
This is MK7 MK8 Heated Aluminum Block mainly used for 3D printers. It works perfectly with the nozzle and nozzle throat Inner hole for set screws: M6 and M3 (heat pipe and thermocouple).
Features:
Type: Heated Block
Material: Aluminum
Heater Mounting Hole: 6mm diameter
Thermocouple ..
₹56 ₹89
-48 %
Brand: FlyRobo
Model: FR-05-349
G3MB-202P 2A 5VDC 240VAC 4Pin Solid State Relay based on the Omron G3MB SSR relay which can control up to 2A at 240VAC. It can be controlled through a digital signal. Solid State Relay generates no noise and has a much longer lifespan.
Features:
Type: Solid State Relay
Series: G3MB
Easy..
₹56 ₹108
-48 %
Brand: FlyRobo
Model: FR-06-239
Optical Endstop Light Control Limit Switch is mainly used in 3D printing or CNC project. It will immediately output the digital control when the light is blocked and turn the LED on.
Features:
There is no noise, and the longer service life is reached.
The best solution for any type of 3D ..
₹57 ₹108
-62 %
Brand: FlyRobo
Model: FR-06-387
This is a 3D Printer CNC Lead Copper Nut 2x8mm. It is used with an 8mm Lead Screw in general machine tools such as 3D printing.
Features:
Made from brass and is very reliable in linear motion applications.
Provides easy to install and convenient to use.
It is compatible with 8mm lead sc..
₹57 ₹149
-36 %
Out Of Stock
Brand: FlyRobo
Model: FR-01-126
2x4 Matrix Keyboard 8-bit Keyboard Module consists of Microswitch buttons. It has 8 keys in total. The module is already equipped with soldered pin-headers. This can be used as the perfect choice for the expansion of the keyboard of the single-chip microcomputer. It is more convenient to increase th..
₹57 ₹89
-36 %
Brand: FlyRobo
Model: FR-01-744
The HC-SR501 PIR Motion Detector Sensor Module is a pyroelectric device that detects motion by measuring changes in the infrared levels emitted by surrounding objects. This motion can be detected by checking for a high signal on a single I/O pin.
The module has an onboard pyroelectric sensor, con..
₹57 ₹89
-7 %
Brand: FlyRobo
Model: FR-04-276
Wheels for your robot, easy to mount, durable and cheap. These wheels have a 6mm hole for the shaft with the screw for fitting making it very easy to mount on motors.
Features and Specification :
Shaft Diameter – 6 mm
Wheel Diameter – 70 mm
Wheel Width – 40 mm
Package Inc..
₹57 ₹61
