Brand: FlyRobo
SKU: 887
This IR Infrared Flame Sensor Module is Arduino compatible can use to detect flame or wavelength of the light source within 760nm~1100nm also useful for Lighter flame detection at a distance of 80cm.
Greater the flame, the farther the test distance. It has a Detect angle of 60° and very sensiti..
₹34 ₹126
Brand: FlyRobo
SKU: 332
TSOP1738 is an infrared receiver tuned to receive IR of frequency 38 kHz only. It is perfect for making obstacle sensors and to read signals from most IR remotes. When used as a receiver in distance sensors, it provides better performance as it allows better reception and protection from ambient lig..
₹46
Brand: FlyRobo
SKU: 1780
JDY-23 Bluetooth 5.0 Transparent Transmission Module adopts an imported original chip design, supports users to modify the device's name, baud rate, and other commands through AT command. The maximum transmission power is 4db and the maximum transmission distance is 60 meters.
It is based on the ..
₹149 ₹239
Brand: FlyRobo
SKU: 2145
JDY-33 Bluetooth 3.0 SPP + BLE-based design, which can support Windows, Linux, Android, IOS Transparent data transmission. JDY-33 is a classic Bluetooth + BLE dual-mode Bluetooth, can communicate with Bluetooth-enabled computers (desktop, notebook), mobile (android), IOS.
Features:
Model: J..
₹157 ₹199
Brand: FlyRobo
SKU: 1787
Joystick Shield Expansion Board is an Uno-compatible shield that allows you to turn an Arduino Uno. It is a 3.3V to 5V Gamepad Joystick Shield Module. It has 7 Momentary push buttons i.e 4 big buttons, 2 small buttons, 1 joystick select button. It can fit onto your Arduino and turns it into a simple..
₹154 ₹348
Brand: FlyRobo
SKU: 1159
JQ6500 is a serial chip to provide MP3, the perfect integrated MP3, WMV hard decoding. At the same time software supports the TF card driver, supports the computer directly update SPI flash content, supports FAT16, FAT32 file system.
Through a simple serial command to complete the playback of th..
₹219 ₹399
Brand: FlyRobo
SKU: 2569
K-Type M3 Screw Head Thermocouple Sensor can be used to measure the temperature within the 0 to 260°C Range. It is designed with k type connector with an insulated wire.
Features:
Connector Type: K Type
Thread size: M3
Color: red - positive, blue - negative.
Cable length: 1.5 meter
..
₹635 ₹689
Brand: FlyRobo
SKU: 2625
K-Type M4 Screw Head Thermocouple Sensor can be used to measure the temperature within the 0 to 260°C Range. It is designed with k type connector with an insulated wire.
Features:
Connector Type: K Type
Thread size: M4
Color: red - positive, blue - negative.
Cable length: 1.5 meter
..
₹570 ₹689
Brand: FlyRobo
SKU: 2342
Any temperature sensor with Chromed and Alumel conductors that satisfies the output specifications outlined in ANSI/ASTM E230 or IEC 60584 for Type K thermocouples is referred to as a Type K thermocouple. This could be a wire, a surface sensor, an immersion sensor, or another kind of sensor or cable..
₹68 ₹69
Brand: FlyRobo
SKU: 2008
KA2284 Power Level Indicator Battery Pro Audio Level Indicator Module can be used for battery charge level indicator (DC) or audio level indicator (AC), AC and DC signals can be controlled by jumper. There are four onboard battery indicator light-emitting diodes (LEDs), three types of color display,..
₹50 ₹199
Brand: FlyRobo
SKU: 963
KQ-330 Power Line Carrier module is designed to communicate between two devices through a Power line (e.g 220V power line) without any extra components.
The PLC can transmit the broadband data via the power lines, which are suitable for either residential (at-home) or commercial (offices, apartme..
₹1,202 ₹1,709
Brand: FlyRobo
SKU: 1108
The KY-005 Infrared Transmitter Module consists of just a 5mm IR LED. It works together with the KY-022 IR receiver module. Compatible with popular electronics platforms like Arduino, Raspberry Pi, and ESP8266.
Features:
This is a 38KHz Infrared IR transmitter sensor module For Arduino
Tr..
₹52 ₹79
