Brand: FlyRobo
SKU: 970
LM35 is an integrated analog temperature sensor whose electrical output is proportional to Degree Centigrade. LM35 Sensor does not require any external calibration or trimming to provide typical accuracies. The LM35’s low output impedance, linear output, and precise inherent calibration make interfa..
₹82
Brand: FlyRobo
SKU: 1788
LM358 Gain Signal Amplification Operational Amplifier Module which can provide amplification of about 100 times. This can be used very easily as it has header pins that can connect directly to your development board. It is designed to operate from a single power supply over a wide range of voltages...
₹54 ₹86
Brand: FlyRobo
SKU: 1937
LM35D Analog Temperature Sensor Module is used to detect ambient air temperature. It is based on Semiconductor LM35 Temperature Sensor. The output voltage is proportional to the temperature.
Features:
Sensitivity is 10mV per degree Celsius.
It is based on the semiconductor LM35 temperatu..
₹86 ₹138
Brand: FlyRobo
SKU: 3649
The LM393 Linear Hall Effect Sensor Module is a versatile sensor designed to detect magnetic field variations. It features a linear Hall Effect sensor capable of measuring the strength and polarity of magnetic fields. The onboard LM393 comparator ensures accurate digital output signals for threshold..
₹37
Brand: FlyRobo
SKU: 714
The LDR Sensor Module is used to detect the presence of light / measuring the intensity of light. The output of the module goes high in the presence of light and it becomes low in the absence of light. The sensitivity of signal detection can be adjusted using a potentiometer.
Features :
Usi..
₹35 ₹89
Brand: FlyRobo
SKU: 3915
The LM393 Photosensitive LDR Sensor Module is a light detection module that uses an LDR (Light Dependent Resistor) to sense ambient light levels. It features an LM393 voltage comparator to provide a stable digital output signal when the light intensity crosses a set threshold. The module includes an..
₹36
Brand: FlyRobo
SKU: 1204
LTC3588 Energy Harvester Breakout board uses the Piezoelectric Energy Harvester from Linear Technologies. This board can be used for harvesting piezoelectric energy and solar energy.
There is a bridge rectified input for piezo elements (PZ1 and PZ2) and a direct input (VIN) for DC sources. Both a..
₹1,732 ₹1,999
Brand: FlyRobo
SKU: 1157
LTC4150 Current Power Sensor Detection Module is capable of constantly monitoring the current your sensor is using, is able to add it up, and will give you a pulse each time a given amount of amp-hours have been used.
When used effectively and if you start with a full battery, you’ll always know..
₹461
Brand: FlyRobo
SKU: 1357
This is PCB Antenna having a frequency of 704-960 MHz and 1710 - 2700 MHz. PCB Antenna is a wireless device to receive and transmit signals, it has been widely used in telecommunication to communicate. One of the main reasons to use a PCB antenna is the reduced overall cost of the radio module. you ..
₹58 ₹79
Brand: FlyRobo
SKU: 819
MAX30100 is an integrated pulse oximeter and heart-rate monitor sensor solution.
It’s an optical sensor that derives its readings from emitting two wavelengths of light from two LEDs – a red and an infrared one – then measuring the absorbance of pulsing blood through a photodetector.
This par..
₹112 ₹258
Brand: FlyRobo
SKU: 3510
The MAX30102 is a highly integrated sensor designed for measuring blood oxygen saturation (SpO2) and heart rate (HR). It combines a red and infrared LED with a photodetector to accurately monitor pulse oximetry and heart rate. This sensor features low power consumption and a compact form factor, mak..
₹269
Brand: FlyRobo
SKU: 961
The MAX30102 provides a complete system solution to ease the design-in process for mobile and wearable devices. The MAX30102 operates on a single 1.8V power supply and a separate 5.0V power supply for the internal LEDs. Communication is through a standard I2C-compatible interface. The module can be ..
₹273 ₹399
