Brand: FlyRobo
SKU: 1923
This is LED Strips and LED Controller with Y-cable Set, the light can be controlled via the transmitter or the button on the LED controller, the controller remembers the last setting when power on. It makes any model look brighter and realistic. You can also adjust the different flash patterns of fl..
₹599 ₹678
Brand: FlyRobo
SKU: 2147
The LIS3DSH has dynamically selectable full scales of ±2g/±4g/±6g/±8g/±16g and is capable of measuring accelerations with output data rates from 3.125 Hz to 1.6 kHz. LIS3DSH is an ultra-low-power high-performance three-axis linear accelerometer belonging to the “nano” family with an embedded state m..
₹123 ₹189
Brand: FlyRobo
SKU: 1155
The LM34 is a precision Fahrenheit temperature sensor in a standard TO-92 package suitable for remote applications or direct PCB mounting. The LM34 has a wide operating voltage range of 5 to 30 volts DC and a temperature range of +32° to +212°F.
Package Includes:
1 x LM34 Temperature Sens..
₹67 ₹99
Brand: FlyRobo
SKU: 970
LM35 is an integrated analog temperature sensor whose electrical output is proportional to Degree Centigrade. LM35 Sensor does not require any external calibration or trimming to provide typical accuracies. The LM35’s low output impedance, linear output, and precise inherent calibration make interfa..
₹77 ₹77
Brand: FlyRobo
SKU: 1788
LM358 Gain Signal Amplification Operational Amplifier Module which can provide amplification of about 100 times. This can be used very easily as it has header pins that can connect directly to your development board. It is designed to operate from a single power supply over a wide range of voltages...
₹48 ₹86
Brand: FlyRobo
SKU: 1937
LM35D Analog Temperature Sensor Module is used to detect ambient air temperature. It is based on Semiconductor LM35 Temperature Sensor. The output voltage is proportional to the temperature.
Features:
Sensitivity is 10mV per degree Celsius.
It is based on the semiconductor LM35 temperatu..
₹80 ₹138
Brand: FlyRobo
SKU: 3649
The LM393 Linear Hall Effect Sensor Module is a versatile sensor designed to detect magnetic field variations. It features a linear Hall Effect sensor capable of measuring the strength and polarity of magnetic fields. The onboard LM393 comparator ensures accurate digital output signals for threshold..
₹35 ₹36
Brand: FlyRobo
SKU: 714
The LDR Sensor Module is used to detect the presence of light / measuring the intensity of light. The output of the module goes high in the presence of light and it becomes low in the absence of light. The sensitivity of signal detection can be adjusted using a potentiometer.
Features :
Usi..
₹29 ₹89
Brand: FlyRobo
SKU: 3915
The LM393 Photosensitive LDR Sensor Module is a light detection module that uses an LDR (Light Dependent Resistor) to sense ambient light levels. It features an LM393 voltage comparator to provide a stable digital output signal when the light intensity crosses a set threshold. The module includes an..
₹29
Brand: FlyRobo
SKU: 2679
LM393 Voltage Comparator Module is frequently helpful when a straightforward On/Off output from a variable voltage (analog) source is needed. This module has an adjustable set-point so the change between OFF and ON can be configured between the input voltage and ground.
A comparator is used to co..
₹93 ₹129
Brand: FlyRobo
SKU: 1204
LTC3588 Energy Harvester Breakout board uses the Piezoelectric Energy Harvester from Linear Technologies. This board can be used for harvesting piezoelectric energy and solar energy.
There is a bridge rectified input for piezo elements (PZ1 and PZ2) and a direct input (VIN) for DC sources. Both a..
₹1,619 ₹1,999
Brand: FlyRobo
SKU: 1157
LTC4150 Current Power Sensor Detection Module is capable of constantly monitoring the current your sensor is using, is able to add it up, and will give you a pulse each time a given amount of amp-hours have been used.
When used effectively and if you start with a full battery, you’ll always know..
₹431
