Brand: FlyRobo
Model: FR-01-741
LM358 Gain Signal Amplification Operational Amplifier Module which can provide amplification of about 100 times. This can be used very easily as it has header pins that can connect directly to your development board. It is designed to operate from a single power supply over a wide range of voltages...
₹44 ₹86
Brand: FlyRobo
Model: FR-05-607
DESCRIPTION:-
This IC LM358 is 8-pin IC. These devices consist of two independent, high-gain frequency-compensated operational amplifiers designed to operate from a single supply or split supply over a wide range of voltages. Common-Mode Input Voltage Range Includes Ground, Allowing Direct Sensin..
₹10
Brand: FlyRobo
Model: FR-05-609
LM358 is a dual op-amp IC integrated with two op-amps powered by a common power supply. It can be considered as one half of LM324 Quad op-amp which contains four op-amps with common power supply. The differential input voltage range can be equal to that of the power supply voltage. The default ..
₹9
Brand: FlyRobo
Model: FR-05-879
Presenting your portable solution for fine-tuning signal amplification: the LM358 Weak Signal Secondary Operational Amplifier Module. The well-known LM358 operational amplifier, used in many electronic applications to boost weak signals, is featured in this module.
The LM358 Weak Signal Secondary..
₹81 ₹129
Brand: FlyRobo
Model: FR-01-625
LM35D Analog Temperature Sensor Module is used to detect ambient air temperature. It is based on Semiconductor LM35 Temperature Sensor. The output voltage is proportional to the temperature.
Features:
Sensitivity is 10mV per degree Celsius.
It is based on the semiconductor LM35 temperatu..
₹74 ₹138
Brand: FlyRobo
Model: FR-01-869
LM386 Audio Amplifier Module is a miniature module for amateur projects. Simply connect a 4-8 Ohm speaker and amplify your sound. It can be used with the FM receiver kit or WTV020SD-16P music module. You can definitely use this module for other musical projects also. The chip pin leads can directly ..
₹42 ₹59
Brand: FlyRobo
Model: FR-05-613
DESCRIPTION:-
The LM3914 is a monolithic integrated circuit that senses analog voltage levels and drives 10 LEDs providing a linear analog display. A single pin changes the display from a moving dot to a bar graph. The current drive to the LEDs is regulated and programmable, eliminating the need ..
₹31 ₹58
Brand: FlyRobo
Model: FR-05-794
The LM393 Linear Hall Effect Sensor Module is a versatile sensor designed to detect magnetic field variations. It features a linear Hall Effect sensor capable of measuring the strength and polarity of magnetic fields. The onboard LM393 comparator ensures accurate digital output signals for threshold..
₹36
Brand: FlyRobo
Model: FR-01-544
The LDR Sensor Module is used to detect the presence of light / measuring the intensity of light. The output of the module goes high in the presence of light and it becomes low in the absence of light. The sensitivity of signal detection can be adjusted using a potentiometer.
Features :
Usi..
₹30 ₹89
Brand: FlyRobo
Model: FR-01-377
The LM393 Photosensitive LDR Sensor Module is a light detection module that uses an LDR (Light Dependent Resistor) to sense ambient light levels. It features an LM393 voltage comparator to provide a stable digital output signal when the light intensity crosses a set threshold. The module includes an..
₹27
Brand: FlyRobo
Model: FR-05-610
The LM393 is a dual differential comparator; this means that it accepts 2 inputs for comparison. It compares these voltage inputs and determines which is the larger value. Based on this, electronic decisions can be made based on which input is greater and which is smaller. Thus, a comparator is..
₹5.78 ₹14
Brand: FlyRobo
Model: FR-01-080
LM393 Voltage Comparator Module is frequently helpful when a straightforward On/Off output from a variable voltage (analog) source is needed. This module has an adjustable set-point so the change between OFF and ON can be configured between the input voltage and ground.
A comparator is used to co..
₹86 ₹129