Brand: FlyRobo
SKU: 2534
This is a 20x69x36mm Aluminum heatsink that can be used for multipurpose applications. The aluminum heat sink reduces the risk of hardware failure because of overheating.
Features:
Quantity of blade: 26
It absorbs heat quickly.
Designed to maximize its surface area in contact with cool ..
₹201
-7 %
Brand: FlyRobo
SKU: 1675
AC-DC Step Down Switching Power Supply Module converts AC power to 12V 3A DC. It has built-in over-voltage, over-current, and short circuit protection. It is perfectly designed and well constructed, small and compact size with an indicator.
Features:
Simple to use
High-Efficiency Step-Dow..
₹462 ₹499
-70 %
Out Of Stock
Brand: FlyRobo
SKU: 2122
This is 2x40 Pin Male Berg Strip has a standard spacing of 2.54mm. It has two rows of 40 pins. These are best for the extension of pins of Microcontrollers and ICs.These connectors are breakable in length, because of the brittleness of the plastic material, with a one-time push you can break this co..
₹5.66 ₹19
-57 %
Brand: FlyRobo
SKU: 1302
This is a Black Aluminum Heatsink kit used for cooling the chips on Raspberry Pi. Comparing to other heatsinks, it has been attached with thermally conductive adhesive tape, allowing the Raspberry Pi to cool more efficiently.
This heatsink has an adhesive film on the back. It is very easy to mou..
₹38 ₹89
-60 %
Brand: FlyRobo
SKU: 1942
This is a Blue Aluminum Heatsink kit used for cooling the chips on Raspberry Pi. It has been attached with thermally conductive adhesive tape, allowing the Raspberry Pi to cool more efficiently.
The heatsink has an adhesive film on the back. It is very easy to mount it on the BGA chip. Just remo..
₹36 ₹89
-58 %
Brand: FlyRobo
SKU: 1944
This is a Golden Aluminum Heatsink kit used for cooling the chips on Raspberry Pi. It has been attached with thermally conductive adhesive tape, allowing the Raspberry Pi to cool more efficiently.
The heatsink has an adhesive film on the back. It is very easy to mount it on the BGA chip. Just re..
₹37 ₹89
-57 %
Brand: FlyRobo
SKU: 1943
This is a Green Aluminum Heatsink kit used for cooling the chips on Raspberry Pi. It has been attached with thermally conductive adhesive tape, allowing the Raspberry Pi to cool more efficiently.
The heatsink has an adhesive film on the back. It is very easy to mount it on the BGA chip. Just rem..
₹38 ₹89
Brand: FlyRobo
SKU: 2335
This is a 3 pin JST XH Male connector. This connector connects wires to a board. It is a disconnectable connector in the crimp style. It is an entry-level model.
The wires must be crimped to the terminal before being inserted into the female connection and attached to any board's male connector. ..
₹1.50
-22 %
Out Of Stock
Brand: FlyRobo
SKU: 3097
The 3.5-inch TFT LCD Touch Screen Arduino UNO Shield offers a compact and versatile solution for integrating a touchscreen display with an Arduino UNO board. With its vibrant 320x480 resolution display, it enables intuitive interaction with your Arduino projects. The shield seamlessly connects to th..
₹1,133 ₹1,449
-20 %
Out Of Stock
Brand: FlyRobo
SKU: 1133
This small 3.5-inch touch screen Raspberry Pi Display module is designed especially for Raspberry Pi, using the latest Linux Core system. This is ideal for DIY anywhere, anytime, and does not require any separate power source or case to hold it. The module sits right on top of Pi and an ideal altern..
₹1,204 ₹1,499
Brand: FlyRobo
SKU: 2434
Mini DC-DC Boost Step-Up Converter Board Module, 3.7V to 12V A DC-DC Boost step-up converter module is used to increase the voltage and has output voltages of 5V, 8V, 9V, and 12V. The voltage boost converter module produces a consistent 3.7V DC voltage at a range of input voltages between 3.7V and 1..
₹59
-72 %
Brand: FlyRobo
SKU: 1425
Flex Cable will let you swap out the stock 300mm long flex cable from a Raspberry Pi Camera for a different size. Works great, just carefully open the connector on the Pi and slip this one in.
Features:
Easy to use.
Easily replaceable.
Applications:
Displays, PC and Computers, ..
₹48 ₹169
