-31 %
Out Of Stock
Brand: FlyRobo
SKU: 2414
2.13 Inch E-Paper Flexible Ink Screen LCD Module is suitable for Ardunio/STM32. It uses the "microcapsule electrophoresis display" technology for image display.
Features:
Three-Color Display: Black, White, Red
MH-ET Live: Waveshare 3 color display equivalent
Low Power Consumption
It ..
₹1,440 ₹2,100
-35 %
Out Of Stock
Brand: FlyRobo
SKU: 2415
2.13 Inch E-Paper Flexible Ink Screen LCD Module is suitable for Ardunio/STM32. It uses the "microcapsule electrophoresis display" technology for image display.
Features:
Two-Color Display: Black and White
Low Power Consumption
It has a wide viewing angle
Used for display of electron..
₹1,363 ₹2,100
-49 %
Brand: FlyRobo
SKU: 1149
2.4G wifi receiver antenna Bluetooth remote control antenna built-in gold-plated.
Features:
Name: Receiver antenna
Frequency:2.4G
used for: receiver/Monitoring antenna/Bluetooth antenna
Connector type: IPX13
Material: RF113 Silver line
Length:13cm
Package Includes:
1 x 2.4..
₹25 ₹49
Brand: FlyRobo
SKU: 233
Single row of 40-holes, female header. Can be cut to size with a pair of wire cutters. Standard .1" spacing. We use them extensively in the Olimex development boards. They mate very well with break away headers.
Specifications and Features:
Number of Pins: 40
Pin Spacing(pitch): 2.54..
₹17
-39 %
Brand: FlyRobo
SKU: 2418
2.9 Inch E-Paper Flexible Ink Screen LCD Module is suitable for Ardunio/STM32. It uses the "microcapsule electrophoresis display" technology for image display. E-Paper Displays can retain the screen content even after power is removed. These displays are suitable for building low-power, battery-oper..
₹1,535 ₹2,499
-39 %
Brand: FlyRobo
SKU: 2419
2.9 Inch E-Paper Flexible Ink Screen LCD Module is suitable for Ardunio/STM32. It uses the "microcapsule electrophoresis display" technology for image display. E-Paper Displays can retain the screen content even after power is removed. These displays are suitable for building low-power, battery-oper..
₹1,535 ₹2,499
Brand: FlyRobo
SKU: 2534
This is a 20x69x36mm Aluminum heatsink that can be used for multipurpose applications. The aluminum heat sink reduces the risk of hardware failure because of overheating.
Features:
Quantity of blade: 26
It absorbs heat quickly.
Designed to maximize its surface area in contact with cool ..
₹201
-7 %
Brand: FlyRobo
SKU: 1675
AC-DC Step Down Switching Power Supply Module converts AC power to 12V 3A DC. It has built-in over-voltage, over-current, and short circuit protection. It is perfectly designed and well constructed, small and compact size with an indicator.
Features:
Simple to use
High-Efficiency Step-Dow..
₹462 ₹499
-70 %
Out Of Stock
Brand: FlyRobo
SKU: 2122
This is 2x40 Pin Male Berg Strip has a standard spacing of 2.54mm. It has two rows of 40 pins. These are best for the extension of pins of Microcontrollers and ICs.These connectors are breakable in length, because of the brittleness of the plastic material, with a one-time push you can break this co..
₹5.66 ₹19
-57 %
Brand: FlyRobo
SKU: 1302
This is a Black Aluminum Heatsink kit used for cooling the chips on Raspberry Pi. Comparing to other heatsinks, it has been attached with thermally conductive adhesive tape, allowing the Raspberry Pi to cool more efficiently.
This heatsink has an adhesive film on the back. It is very easy to mou..
₹38 ₹89
-60 %
Brand: FlyRobo
SKU: 1942
This is a Blue Aluminum Heatsink kit used for cooling the chips on Raspberry Pi. It has been attached with thermally conductive adhesive tape, allowing the Raspberry Pi to cool more efficiently.
The heatsink has an adhesive film on the back. It is very easy to mount it on the BGA chip. Just remo..
₹36 ₹89
-58 %
Brand: FlyRobo
SKU: 1944
This is a Golden Aluminum Heatsink kit used for cooling the chips on Raspberry Pi. It has been attached with thermally conductive adhesive tape, allowing the Raspberry Pi to cool more efficiently.
The heatsink has an adhesive film on the back. It is very easy to mount it on the BGA chip. Just re..
₹37 ₹89
