Brand: FlyRobo
SKU: 2139
L7812 is equipped with a heat sink, and a 3A rectifier bridge can meet high-current output. It uses a full-wave bridge rectifier, AC or DC can be entered, and the input regardless of positive and negative electrodes. Filtering using two large-capacity electrolytic capacitors 35V 220UF do buffer filt..
₹122 ₹138
Brand: FlyRobo
SKU: 265
This is an LM2596 DC-DC step-down converter with the high-precision potentiometer, capable of driving a load up to 3A with high efficiency, which can work with an Arduino nano, Arduino UNO, other mainboards and basic modules. When the output current keeps greater than 2.5A (or output power greater t..
₹48 ₹75
SKU: 2252
The LM393 Sound Detection Sensor Module for Arduino determines if the sound level has surpassed a predetermined level. An LM393 op-amp receives the sound data from the microphone and processes it.A potentiometer on board is used to adjust the sound volume setpoint. The output is sent low and an LED ..
₹68 ₹69
Brand: FlyRobo
SKU: 2101
Matrix Nand Programmer MTX SPI NAND Flasher V1.0 features a PIC18F2455 microcontroller for stable and quick reading/writing of all NAND models available on the different XBOX 360 models. It is also fully compatible with NAND PRO 2.0e and several other third-party programming tools.
Features:
..
₹701
Brand: FlyRobo
SKU: 1051
MCP23017 is a high-speed IIC interface. It supports the IIC frequency of 100KHz, 400KHz, and 1.7MHz. The chip has 3 address pins, which can set up to 8 different addresses. So 8 modules can be connected through two IIC buses to achieve up to 128 IO extensions.
This module is flexible in configura..
₹301 ₹449
Brand: FlyRobo
SKU: 2166
MCP4725 is an I2C controlled Digital-to-Analog converter (DAC) that allows you to send an analog signal. This version of the MCP4725 Breakout fixes a few issues with the board
including the IC footprint, the I2C pinout, changes the overall board dimensions to better fit your projects and a few more..
₹396 ₹499
Brand: FlyRobo
SKU: 1055
MCP4725 I2C DAC Breakout Development Board Module has MCP4725 which is an I2C controlled Digital-to-Analog converter (DAC). A very cost-efficient option of DAC allows you to send an analog signal, such as a sine wave, from a digital source, such as the I2C interface on the Arduino microcontroller. D..
₹113 ₹499
Brand: FlyRobo
SKU: 772
Mega +WiFi R3 Atmega2560+NodeMCU ESP8266 32Mb Memory USB-TTL CH340G Compatible For Arduino Mega is Full integration on one board Mega R3 ATmega2560 and WiFi ESP8266 with memory 32Mb.
It is a customized version of the classic ARDUINO MEGA R3 board. Full integration of Atmel ATmega2560 microcontrol..
₹1,227 ₹1,999
Brand: FlyRobo
SKU: 1035
Mega2560 Pro ATMEGA2560-16AU USB CH340G Development Board is based on the ATmega2560 microcontroller. Built on the Atmel ATmega2560 microcontroller and 16 MHz high-quality quartz resonators are present on the board. The board uses the chip CH340G as the converter UART-USB. It provides a stable data ..
₹1,049 ₹1,534
Brand: FlyRobo
SKU: 742
Micro SD Card Reader Module also called Micro SD Adaptor which is designed for dual I/O voltages. The Module is a simple solution for transferring data to and from a standard SD card. The pinout is directly compatible with Not only Arduino but can also be used with other microcontrollers.SD module h..
₹53 ₹78
Brand: FlyRobo
SKU: 790
The LilyTiny is a tiny little LilyPad board designed to add flashy functionality to your project without taking up a lot of room.
Even though it’s as small as some of the LilyPad sensors, this board actually has an ATtiny microcontroller on it so it’s actually pretty smart!
Simply sew on 4 L..
₹215
Brand: FlyRobo
SKU: 2862
The Micro:bit T-type GPIO Board is Here—Your Doorway to Endless Possibilities!
With our T-type GPIO Board, your Micro:bit can reach its full potential. This small, feature-rich expansion board is intended to give your Micro:bit projects a boost. This board will advance your inventions, whether yo..
₹182 ₹289
