-37 %
Brand: FlyRobo
Model: FR-01-241
2.13 Inch E-Paper Flexible Ink Screen LCD Module is suitable for Ardunio/STM32. It uses the "microcapsule electrophoresis display" technology for image display.
Features:
Two-Color Display: Black and White
Low Power Consumption
It has a wide viewing angle
Used for display of electron..
₹1,316 ₹2,100
Brand: FlyRobo
Model: FR-01-998
2.4G wifi receiver antenna Bluetooth remote control antenna built-in gold-plated.
Features:
Name: Receiver antenna
Frequency:2.4G
used for: receiver/Monitoring antenna/Bluetooth antenna
Connector type: IPX13
Material: RF113 Silver line
Length:13cm
Package Includes:
1 x 2.4..
₹49
-33 %
Brand: FlyRobo
Model: FR-01-914
Single row of 40-holes, female header. Can be cut to size with a pair of wire cutters. Standard .1" spacing. We use them extensively in the Olimex development boards. They mate very well with break away headers.
Specifications and Features:
Number of Pins: 40
Pin Spacing(pitch): 2.54..
₹8 ₹12
-36 %
Brand: FlyRobo
Model: FR-01-243
2.9 Inch E-Paper Flexible Ink Screen LCD Module is suitable for Ardunio/STM32. It uses the "microcapsule electrophoresis display" technology for image display. E-Paper Displays can retain the screen content even after power is removed. These displays are suitable for building low-power, battery-oper..
₹1,601 ₹2,499
-36 %
Brand: FlyRobo
Model: FR-01-244
2.9 Inch E-Paper Flexible Ink Screen LCD Module is suitable for Ardunio/STM32. It uses the "microcapsule electrophoresis display" technology for image display. E-Paper Displays can retain the screen content even after power is removed. These displays are suitable for building low-power, battery-oper..
₹1,601 ₹2,499
-32 %
Brand: FlyRobo
Model: FR-01-767
The Keypad1x4 features a total of 4 buttons in Matrix form. This is a membrane keypad with no moving parts. A female 9-pin berg connector is required for interfacing it with your microcontroller circuits. A simple way to mount the keypad in a variety of applications, as it has an adhesive backing.
..
₹101 ₹148
Brand: FlyRobo
Model: FR-06-438
This is 20 Teeth 5mm Bore GT2 Timing Pulley for a 10mm Belt that works with GT2 10mm wide timing belt; it will work perfectly with the GT2 pulley-belt sets we are selling on our site. This idler is a good match for the 20T GT2 driving Timing Belt Pulley. This pulley has 20 Tooth and a 5mm inner bore..
₹99
Brand: FlyRobo
Model: FR-01-989
2000W 220V SCR Voltage Regulator Dimmers Speed Controller Thermostat is a speed controller used to control AC supply and suitable for electric furnace, water heater, lamps, small motor, electric iron. etc. You can play a brightness adjustment, speed, pressure, temperature control effect, very conven..
₹199
New
Out Of Stock
Brand: FlyRobo
Model: FR-05-256
Introducing the 20mm Humidifier Microporous Nebulizer Tablet: Revolutionize your humidification experience with this compact powerhouse. Crafted with precision, its microporous design ensures efficient dispersion of moisture, creating a soothing atmosphere in any room. Say goodbye to dry air and hel..
₹79
Brand: FlyRobo
Model: FR-01-516
If you need a way to sense the level of ambient light then there is no easier way to do it without an LDR/photo-resistor. The resistance of Light Sensitive Photoresistor LDR changes with the change in the ambient light exposure on the surface of the sensor. Light Dependent Resistor is a type of phot..
₹75
Brand: FlyRobo
Model: FR-01-006
This is a 20x69x36mm Aluminum heatsink that can be used for multipurpose applications. The aluminum heat sink reduces the risk of hardware failure because of overheating.
Features:
Quantity of blade: 26
It absorbs heat quickly.
Designed to maximize its surface area in contact with cool ..
₹189
Out Of Stock
Brand: Zop Power
Model: FR-02-317
This 3-cell Zop Power lipo battery with 2200mah of capacity and 35C of discharge rate comes with XT60 Connector. This lipo battery is compatible with all types of DIY drones or Multi-Rotor.
Features:
Battery parameter: Zop Power 11.1V 2200MAH 35C
Capacity: 2200mah
Continuous Discharge..
₹1,499
