-58 %
Brand: FlyRobo
Model: FR-01-546
Vibration Sensor Module Vibration Switch SW-420 is based on the vibration sensor SW-420 and Comparator LM393 to detect if there is any vibration that beyond the threshold.
The threshold can be adjusted by the on-board potentiometer. When this no vibration, this module output logic LOW the signal..
₹38 ₹90
-37 %
Brand: FlyRobo
Model: FR-01-615
A float switch is a device used to sense the level of liquid within a tank, it may actuate a pump, an indicator, an alarm, or other devices.
Use them with hydroponics, saltwater tank, freshwater tank, gardening, aquariums for power head control, pet bowls, fish tanks, filtration, heating, pumps, ..
₹107 ₹169
-78 %
Brand: FlyRobo
Model: FR-01-874
The 5-36v Switch Drive High-power MOSFET Trigger Module is of high power MOS trigger switch driver module and control board with a field-effect tube to adjust the electronic switch. It adopts imported double MOS parallel active output to show lower internal resistance, greater electric current, and ..
₹33 ₹149
-49 %
Out Of Stock
Brand: FlyRobo
Model: FR-01-882
SW-420 normally closed a highly sensitive axial vibration sensor switch moisture and dustproof housing. Vibration resistance varies with the intensity of vibrations.
Features:
SW-420 normally closed
High sensitivity
Moisture-proof
Dust-proof
Open resistance : >10M Ohm
Closed ..
₹4.56 ₹9
-33 %
Brand: FlyRobo
Model: FR-01-887
KY-025 Reed Sensor Module, an electrical switch consisting of a pair of contacts on ferrous metal reeds. It gets operated by the applied magnetic field. When the device is exposed to a magnetic field, the two ferrous materials inside the switch pull together and the switch closes. When the magnetic ..
₹46 ₹69
-46 %
Brand: FlyRobo
Model: FR-04-242
The DPDT Switch is generally used to make the Clockwise as well as the anti-clockwise motion of the motor. This switch is generally used for Polarity Reversal. It has momentary action where the switch can toggle to two poles on Press & Hold action and returns to the middle (OFF) position with it spr..
₹37 ₹68
-44 %
Brand: FlyRobo
Model: FR-04-243
DPDT switch box in plastic for mounting 3 numbers of the rocker-type DPDT switches (Push To ON Type). This is Remote Control Box for Wired Robot. Remote Control Box is with the arrangement to mount two DPDT Switches. Switches are not included. The switch box is a combo of 2 switches compatible box u..
₹38 ₹68
Brand: FlyRobo
Model: FR-04-245
The rocker switch is Rocker Switch SPST ON/OFF Microswitch.
Specification:
Rating: 3A, 250VAC
Mounting hole diameter: 10-12 mm
Operating Temperature: -25 to 85 C
Size: 8.5x13.5mm (approx)
Package Content:
1 x Switch..
₹9
-29 %
Brand: FlyRobo
Model: FR-05-202
This is 6 Pin Mini Push Button Square Switch Self-Locking DPDT PCB Mount.
Features:
Switch Type: Push Button Switch
Type: locking
size: 7mmx7mm
Package Includes:
1 x 6 Pin Square Tactile Push Button Switch
..
₹5 ₹7
-59 %
Brand: FlyRobo
Model: FR-05-203
The tactile switch is used for mounting on your PCB to close a circuit. The small tactile switches come in THT & SMT mounting styles and excellent quality.
Features:
Contact Configuration: Single Pole Single Throw (SPST)
Terminal Type: Through Hole
Switch Operation: Momentary
Actuator..
₹2.05 ₹5
Brand: FlyRobo
Model: FR-05-204
The tactile switch also called a momentary button or push-to-make switch and is commonly used for input and microcontroller resets. This type of button creates a temporary electrical connection when pressed.
Features of Tactile Switch 2 Pin:
Size: 6mm.
Ease of use.
Long life.
Appli..
₹3
Brand: FlyRobo
Model: FR-05-205
Tactile Push Button Switch is widely used as a standard input “buttons” on electronic projects. These work best when you mount it on PCB but can also be used on a solderless breadboard for temporary connections in prototypes. The pins are normally open (disconnected) and when the button is pressed t..
₹4
Out Of Stock
Brand: FlyRobo
Model: FR-05-206
The tactile switch also called a momentary button or push-to-make switch and is commonly used for input and microcontroller resets. This type of button creates a temporary electrical connection when pressed.
Features :
Ease of use.
Long life.
Applications :
Reset switch.
DI..
₹3
-32 %
Out Of Stock
Brand: HI-LINK
Model: FR-05-211
HLK-5M05 5V/5W Switch Power Supply Module is a plastic enclosed PCB mounted isolated switching step-down power supply module. It can supply 5V DC from 120V AC – 230V AC and has a power rating of 5 Watt. This makes it perfect for small projects that need a 5 volt supply from mains. This power supply..
₹229 ₹338
-3 %
Brand: HI-LINK
Model: FR-05-212
HLK-PM24 3W Switch Power Supply Module is a plastic enclosed PCB mounted isolated switching step-down power supply module. It can supply 24V DC from 100V AC – 240V AC and has a power rating of 3 Watt. This makes it perfect for small projects that need 24 volt supply from mains. There are many advant..
₹270 ₹278
-33 %
Out Of Stock
Brand: HI-LINK
Model: FR-05-213
HLK-10M05 5V/10W Switch Power Supply Module is a plastic enclosed PCB mounted isolated switching step-down power supply module. It can supply 5V DC from 100V AC – 240V AC and has a power rating of 10 Watt. This makes it perfect for small projects that need a 5 volt supply from mains. There are many..
₹299 ₹448
-31 %
Brand: HI-LINK
Model: FR-05-214
HLK-20M05 5V/20W Switch Power Supply Module is a plastic enclosed PCB mounted isolated switching step-down power supply module. It can supply 5V DC from 100V AC – 240V AC and has a power rating of 20 Watt. This makes it perfect for small projects that need a 5 volt supply from mains. There are many..
₹454 ₹658
-31 %
Brand: HI-LINK
Model: FR-05-215
HLK-20M09 9V/20W Switch Power Supply Module is a plastic enclosed PCB mounted isolated switching step-down power supply module. It can supply 9V DC from 100V AC – 240V AC and has a power rating of 20 Watt. This makes it perfect for small projects that need a 9 volt supply from mains. There are many..
₹466 ₹678
-14 %
Out Of Stock
Brand: HI-LINK
Model: FR-05-216
HLK-2M05 5V/2W Switch Power Supply Module is a plastic enclosed PCB mounted isolated switching step-down power supply module. It can supply 5V DC from 120V AC – 230V AC and has a power rating of 2 Watt. This makes it perfect for small projects that need a 5 volt supply from mains. This power supply..
₹220 ₹255
-24 %
Brand: HI-LINK
Model: FR-05-217
HLK-2M09 9V/2W Switch Power Supply Module is a plastic enclosed PCB mounted isolated switching step-down power supply module. It can supply 9V DC from 100V AC – 240V AC and has a power rating of 2 Watt. This makes it perfect for small projects that need a 9 volt supply from mains. There are many ad..
₹233 ₹308
-31 %
Brand: HI-LINK
Model: FR-05-218
HLK-2M12 12V/2W Switch Power Supply Module is a plastic enclosed PCB mounted isolated switching step-down power supply module. It can supply 12V DC from 100V AC – 240V AC and has a power rating of 2 Watt. This makes it perfect for small projects that need a 12 volt supply from mains. There are many..
₹221 ₹318
-13 %
Brand: HI-LINK
Model: FR-05-219
HLK-5M03 3.3V/5W Switch Power Supply Module is a plastic enclosed PCB mounted isolated switching step-down power supply module. It can supply 3.3V DC from 100V AC – 240V AC and has a power rating of 5Watt. This makes it perfect for small projects that need a 3.3 volt supply from mains. This power s..
₹285 ₹328
-35 %
Brand: HI-LINK
Model: FR-05-220
HLK-5M12 12V/5W Switch Power Supply Module is a plastic enclosed PCB mounted isolated switching step-down power supply module. It can supply 12V DC from 120V AC – 230V AC and has a power rating of 5 Watt. This makes it perfect for small projects that need a 12 volt supply from mains. This power sup..
₹227 ₹348
-30 %
Out Of Stock
Brand: HI-LINK
Model: FR-05-221
HLK-10D1205B 5V/10W DC-DC Switch Power Supply Module 10W DC / DC power module A series products output power is 10W, 4: 1 wide voltage input range, efficiency up to 91%, 1500VDC conventional isolation voltage, allowable operating temperature -40 ℃ to +85 ℃, with input under-voltage protection,..
₹619 ₹879
-28 %
Out Of Stock
Brand: HI-LINK
Model: FR-05-222
HLK-10D11005 5V/10W DC-DC Switch Power Supply Module 10W DC / DC power module A series products output power is 10W, 4: 1 wide voltage input range, efficiency up to 91%, 1500VDC conventional isolation voltage, allowable operating temperature -40 ℃ to +85 ℃, with input under-voltage protection,..
₹649 ₹899
-36 %
Out Of Stock
Brand: HI-LINK
Model: FR-05-223
HLK-10D2412 12V/10W DC-DC Switch Power Supply Module 10W DC / DC power module A series products output power is 10W, 4: 1 wide voltage input range, efficiency up to 91%, 1500VDC conventional isolation voltage, allowable operating temperature -40 ℃ to +85 ℃, with input under-voltage protection, The ..
₹566 ₹879
-28 %
Out Of Stock
Brand: HI-LINK
Model: FR-05-224
HLK-10D4805 5V/10W DC-DC Switch Power Supply Module 10W DC / DC power module A series products output power is 10W, 4: 1 wide voltage input range, efficiency up to 91%, 1500VDC conventional isolation voltage, allowable operating temperature -40 ℃ to +85 ℃, with input under-voltage protect..
₹629 ₹879
-43 %
Brand: HI-LINK
Model: FR-05-225
HLK-20M24 24V/20W Switch Power Supply Module is a plastic enclosed PCB mounted isolated switching step-down power supply module. It can supply 24V DC from 100V AC – 240V AC and has a power rating of 20 Watt. This makes it perfect for small projects that need a 9 volt supply from mains. There are ma..
₹396 ₹699
-6 %
Out Of Stock
Brand: HI-LINK
Model: FR-05-226
HLK-PM01 5V/3W Switch Power Supply Module is a plastic enclosed PCB mounted isolated switching step-down power supply module. It can supply 5V DC from 120V AC – 230V AC and has a power rating of 3 Watt. This makes it perfect for small projects that need a 5 volt supply from mains. There are many ad..
₹215 ₹228
-3 %
Brand: HI-LINK
Model: FR-05-227
HLK-PM03 3.3V/3W Switch Power Supply Module is a plastic enclosed PCB mounted isolated switching step-down power supply module. It can supply 3.3V DC from 120V AC – 230V AC and has a power rating of 3 Watt.This makes it perfect for small projects that need a 3.3 volt supply from mains. There a..
₹232 ₹238
-15 %
Out Of Stock
Brand: HI-LINK
Model: FR-05-228
HLK-PM12 12V/3W Switch Power Supply Module is a plastic enclosed PCB mounted isolated switching step-down power supply module. It can supply 12V DC from 120V AC – 230V AC and has a power rating of 3 Watt. This makes it perfect for small projects that need a 12 volt supply from mains. There are many..
₹210 ₹248
-32 %
Brand: FlyRobo
Model: FR-05-230
12V DC Solenoid Water Air Valve Switch (Normally Closed) – 1/2″ controls the flow of fluid (liquid or air) and acts as a valve between high-pressure fluid! This liquid valve would make a great addition to your robotic gardening project. There are two ½” (Nominal NPT) outlets. Normally, the valve is ..
₹279 ₹409
Brand: FlyRobo
Model: FR-05-368
The Blue 6x6x5mm Tactile Switch Module is a compact push-button switch designed for electronic projects and prototyping. It features a momentary push-button mechanism, ensuring reliable tactile feedback. With a 6x6mm footprint and 5mm height, it's ideal for space-constrained applications. The module..
₹14
Out Of Stock
Brand: FlyRobo
Model: FR-05-369
The DS-429A is a red, self-locking push-button switch designed for various electronic applications. Featuring a square 10mm design with 2-pin terminals, it operates as a momentary switch, meaning it remains active only while pressed. Constructed from durable plastic, it supports operating voltages o..
₹15
-47 %
Brand: FlyRobo
Model: FR-06-230
The Microswitch Limit Switch 2A 125V AC contains one group of contacts for switching. Presence of the lever. It is used in 3D printers. It is often used as a limit switch (end) in household appliances and amateur radio structures.
Package Includes:
1 x Makerbot MK7/MK8 Momentary Micro Limit Sw..
₹10 ₹19
-40 %
Brand: FlyRobo
Model: FR-06-243
CNC 3D Printer Mechanical Endstop Switch uses a lever switch to detect when it is activated. The switch is wired up so that when activated, it pulls the signal to LOW. There is also an LED on the board that will light up when the switch is activated. It uses a standard 4 pin 100″ pitch header and ac..
₹59 ₹99
Brand: FlyRobo
Model: FRC-04-244
This Switch Board comes with 2 DPDT Switch. This Product is Generally used for wired car For Rotating motor Clockwise (CW) and anti-Clockwise (CCW).
Features and Specification:
Homopolymer.
Good Processability.
Good Impact Resistance.
Good Stiffness.
Switched will directly snap..
₹174
Showing 1 to 37 of 37 (1 Pages)
