Brand: FlyRobo
SKU: 265
This is an LM2596 DC-DC step-down converter with the high-precision potentiometer, capable of driving a load up to 3A with high efficiency, which can work with an Arduino nano, Arduino UNO, other mainboards and basic modules. When the output current keeps greater than 2.5A (or output power greater t..
₹48 ₹75
Brand: FlyRobo
SKU: 3124
The LM2596 DC Buck Step Down Power Converter Module is a compact and efficient solution for converting higher voltage DC power sources to lower voltage outputs. With its versatile design, it can handle input voltages ranging from 3V to 40V, making it suitable for a wide range of applications. Its ad..
₹128 ₹169
Brand: FlyRobo
SKU: 3482
The LM2596HVS DC-DC Step Down Module efficiently converts a 4.5V-50V input to a stable 3V-35V output with adjustable voltage regulation. It supports high voltage input, making it suitable for a variety of applications, including battery charging and power regulation. With a maximum output current of..
₹75 ₹87
Brand: FlyRobo
SKU: 3481
The LM2596S Step-down Power Supply Module is a high-efficiency, DC-DC buck converter that reduces voltage from a higher input to a stable, adjustable output. It supports input voltages from 4V to 40V and offers an adjustable output range from 1.25V to 37V, delivering up to 3A of current. With a high..
₹63
Brand: FlyRobo
SKU: 1045
The LM317 DC-DC converter is an electronic circuit for converting a DC source voltage from one level to a lower level. This module is important in some portable electronic devices such as cell phones and laptops, which are primarily supplied by power from batteries.
The step-down voltage can be ..
₹58 ₹99
Brand: FlyRobo
SKU: 313
DESCRIPTION:-
The LM317 device is an adjustable three-terminal positive-voltage regulator capable of supplying more than 1.5 A over an output voltage range of 1.25 V to 37 V. It requires only two external resistors to set the output voltage. The device features a typical line regulation of 0.01% ..
₹17
Brand: FlyRobo
SKU: 381
LM324 is a 14pin IC consisting of four independent operational amplifiers (op-amps) compensated in a single package. Op-amps are high gain electronic voltage amplifier with a differential input and, usually, a single-ended output. The output voltage is many times higher than the voltage differe..
₹13 ₹14
Brand: FlyRobo
SKU: 309
DESCRIPTION:-
This IC LM358 is 8-pin IC. These devices consist of two independent, high-gain frequency-compensated operational amplifiers designed to operate from a single supply or split supply over a wide range of voltages. Common-Mode Input Voltage Range Includes Ground, Allowing Direct Sensin..
₹20
Brand: FlyRobo
SKU: 382
LM358 is a dual op-amp IC integrated with two op-amps powered by a common power supply. It can be considered as one half of LM324 Quad op-amp which contains four op-amps with common power supply. The differential input voltage range can be equal to that of the power supply voltage. The default ..
₹10
Brand: FlyRobo
SKU: 2934
Presenting your portable solution for fine-tuning signal amplification: the LM358 Weak Signal Secondary Operational Amplifier Module. The well-known LM358 operational amplifier, used in many electronic applications to boost weak signals, is featured in this module.
The LM358 Weak Signal Secondary..
₹88 ₹129
Brand: FlyRobo
SKU: 1079
LM386 Audio Amplifier Module is a miniature module for amateur projects. Simply connect a 4-8 Ohm speaker and amplify your sound. It can be used with the FM receiver kit or WTV020SD-16P music module. You can definitely use this module for other musical projects also. The chip pin leads can directly ..
₹52 ₹59
Brand: FlyRobo
SKU: 312
DESCRIPTION:-
The LM3914 is a monolithic integrated circuit that senses analog voltage levels and drives 10 LEDs providing a linear analog display. A single pin changes the display from a moving dot to a bar graph. The current drive to the LEDs is regulated and programmable, eliminating the need ..
₹63
