The LED RGB 5 mm Module incorporates a red, green and blue LED with a clear lens in the same 5 mm package with built-in current limiting resistors(150Ω). This is a 3 Color LED Module. Through the PWM adjusting, three primary colors can be mixed to obtain different colors.
Notice that you do not need to use limiting resistors since they are already included on the board.
- The use of plug-in full-color LED.
- RGB trichromatic limiting resistor to prevent burnout.
- Compatible with Arduino DIY project
- With a variety of single-chip interface.
- Through the PWM adjusting, three primary colors can be mixed to obtain different colors.
1xRGB 3 Color LED Module
Arduino and other microcontrollers
|LED drive mode||
Common Cathode Driver
|LED Type and Size||
RGB 5 mm
Yes, You can claim GST credit if you have a GST number. To do it you have to mention the GST number at the time of checkout. GST option appears in the Billing Address. If you are an existing customer of flyrobo then you can log in to your account ( Account → Address Book → Edit Address) and Then enter your GST number.[ 16/11/2022 ]Was this answer helpful?
Order will be delivered within 1-3 days in metro city, 3-5 days in other city and 4-7 days in villages or small city. This is the average time of delivery in express shipping. but can change with different locations and different situations.[ 16/07/2021 ]Was this answer helpful?