-28 %
Brand: FlyRobo
SKU: 2650
This is a 3D Printer Parallel Stepper Motor Module for Dual Z Axis used for small printers or small current motors in parallel. It is designed for a stepper motor-side parallel, a driver drives two motors, and put them in-line (series) with the motor.
Features:
Easy to connect.
Cable Leng..
₹71 ₹99
-51 %
Brand: FlyRobo
SKU: 2264
Features:-
The door panel is a scaled-down version of the bigger V-Slot gantry and is composed of 6063-T6 aluminium.
When larger wheels are needed, the door panel is a great alternative to the Mini V plate because it is only utilised on the 20mm side of the extrusion.
The timing belt may n..
₹585 ₹1,199
Out Of Stock
Brand: FlyRobo
SKU: 1948
3D Printer Z Axis Platform Supporting Spring has a long compression length, the spring force can be fine-tuned, and the performance is good.
Features:
Each spring can generate up to 1.6 kg of compression force, good elasticity.
Perfect replacement for the old one and has a long service li..
₹16
-53 %
Brand: FlyRobo
SKU: 1949
3D Printers Printer Stepper Mute Filter Module Protector Stepstick Smoother can effectively eliminate low-speed non-uniform waveform signals so as to achieve a relatively flat signal waveform.
Features:
Plug and work, no wiring required
Effective to use.
The effect is most obvious with ..
₹94 ₹199
-42 %
Brand: FlyRobo
SKU: 1383
The 3D pen works by extruding heated plastic that cools almost instantly into a solid, stable structure, allowing for the free-hand creation of three-dimensional objects.
The 3D pen is compatible with both 1.75mm ABS & PLA Filament.
This 3D Printing Pen is a fantastic tool for DIY hobbyists, ..
₹876 ₹1,499
-54 %
Brand: FlyRobo
SKU: 2007
3D Touch Auto Bed Leveling Sensor measures the tilt of your print surface and improves the printing precision of your 3D Printer. The 3D Touch Auto Leveling Sensor is a device that uses the Hall Effect to obtain leveling.
Features:
Accessory type: 3D Touch automatic leveling sensor (version..
₹1,049 ₹2,299
-61 %
Brand: FlyRobo
SKU: 927
This is a Spiral Type GSM Antenna with standard SMA Male Connecter and 3-meter wire length. It provides a high gain of 2 dBi and suitable for tough terrain and open-air environment applications. The input impedance of this antenna is 50 ohm. In comes with a magnetic base. It is used for SIM900A SIM..
₹98 ₹249
-39 %
Brand: FlyRobo
SKU: 1360
A Quad-band antenna for embedded cellular devices. This antenna will allow you to connect your cellular module to the outside world. A compact PCB Antenna for GSM Cellular applications where high performance is required from a small size. Operates on four frequencies. Comes with a 3M adhesive backin..
₹91 ₹149
-31 %
Brand: FlyRobo
SKU: 801
This is a 915Mhz 100mW Radio Telemetry Kit that is based on the 3DR Telemetry kit and is 100% compatible as it runs the same firmware onboard. This firmware used by 3D Robotics is completely open-source.
The Telemetry Kit is compatible with Ardupilot or Pixhawk-based systems and allows you to eas..
₹5,845 ₹8,499
Brand: FlyRobo
SKU: 3570
The 3DR 915MHz 500mW Radio Telemetry Module is a high-performance communication solution for PX4, APM, Pixhawk flight controllers. Operating on 915MHz, it delivers reliable, long-range data transmission with up to 500mW power output. Its compact design and lightweight construction ensure easy integr..
₹7,451
-33 %
Brand: FlyRobo
SKU: 2676
APM Pixhawk Flight Control YYRC 3DR Radio Telemetry 1000MW 915Mhz 433Mhz Air and Ground Data Transmit Module with OTG. It is capable to provide wide range of 2-3 km depends on the atmospere.
Features :
Independent 1W signal amplifier
Both modules have the same design and have a Micro US..
₹8,696 ₹12,999
-31 %
Brand: FlyRobo
SKU: 646
This 3DR Radio Telemetry 433MHz 500mW Set allows you to link to a flight controller to a USB or UART equipped device such as a computer, laptop or tablet supporting a USB connection (OTG).
The new V2 radios, no longer have a separate Air/Ground module, as both transceivers can use UART or USB con..
₹6,853 ₹9,999
