Brand: FlyRobo
SKU: 3399
The Agriculture Drone Single Header Spray Nozzle is a specialized attachment designed for precision spraying in agricultural drones. It ensures even distribution of fertilizers, pesticides, or water across crops with a focused, adjustable spray pattern. Made from durable materials, it is lightweight..
₹1,045 ₹1,248
Brand: FlyRobo
SKU: 1913
APM Pixhawk Power Module is a way of providing your APM with clean power from a LiPo battery as well as current consumption and battery voltage measurements, all through a 6-pos cable.
The onboard switching regulator outputs 5.3V and a maximum of 2.25A from up to a 4S LiPo battery.
Features:
..
₹620 ₹698
Brand: FlyRobo
SKU: 1552
Brushless Motor Controller DC 12-36V 500W PWM Driver Board is used for the 3-phase brushless sensorless motor, but not suit for all 3-phase brushless sensorless motors directly.
If the driving effect is not good (such as starting jitter, reversing, the motor no-load working current is too large, ..
₹1,339 ₹1,398
Brand: FlyRobo
SKU: 1591
CC3D Flight Controller 8 Pin Receiver Cable is suitable for MINI CC3D, standard CC3D, CC3D EVO.
Features:
Material: super soft silicone.
Color Function JST-SH Pin Servo connector plug.
Cable ColorDenotations:
Black Ground1 1.
Red Power to RC RX-(VCC Unregulated) 4.8V-15V 2 1...
₹161
Brand: FlyRobo
SKU: 1862
CC3D NAZE32 F3 Power Distribution Board PDB with LC Filter and Dual BEC is one of the popular CC3D power distribution boards (PDB) with 5 and 12-volt BECs. The BECs are now integrated into the PCB using surface-mount technology, which makes them much more reliable.
It is suitable for Naze32, CC3D..
₹430
Brand: FlyRobo
SKU: 1793
Cellmeter 8 Multi-Functional Digital Power Servo Tester has new features as Servo Tester, Storage Discharge Function, and a Backlit Display, which is not included in Cellmeter 7. Servo tester is very useful for Drone builders as you can use it to spin up your motors to check spin direction without h..
₹924
Brand: FlyRobo
SKU: 1594
DF13 4 Pin Flight Controller communication cable uses the Hirose DF13 series connector. It is typically used between the PixHawk and the GPS receiver module.
Features:
Brand new and high quality
Length : 20cm
Width and Height of plug: 6 x 2.5 mm
Good temperature resistive
Silicon f..
₹50
Brand: FlyRobo
SKU: 1595
DF13 5 Pin Flight Controller communication cable uses the Hirose DF13 series connector. It is typically used between the PixHawk and the GPS receiver module.
Features:
Brand new and high quality
Length : 20cm
Width and Height of plug: 7 x 2.5 mm
Good temperature resistive
Silicon fl..
₹52 ₹79
Brand: FlyRobo
SKU: 1596
DF13 6 Pin Flight Controller communication cable uses the Hirose DF13 series connector. It is typically used between the PixHawk and the GPS receiver module.
Features:
Brand new and high quality
Length : 20cm
Width and Height of plug: 9 x 2.5 mm
Good temperature resistive
Silicon f..
₹65 ₹89
Brand: FlyRobo
SKU: 1392
ESC Multirotor Power Distribution Battery Board for Quadcopter Multi-Axis Model is a lightweight distribution board that will power your multi-rotor aircraft easily.
Simply solder a battery connection onto the two center terminals, and you’ve got eight pairs of connections to use – perfect for qu..
₹129 ₹149
Brand: FlyRobo
SKU: 1571
ESC Power Distribution Board Soldered XT60 Plug & 3.5mm Banana Bullet Connectors for Multicopter FPV
ESC Power Distribution Board Soldered XT60 Plug is a lightweight distribution board that makes powering multi-rotor aircraft easily. It is mainly used For 250mm Multicopter FPV. It can handle up to 20A per output for a quadcopter or drop that down to 10A each for an octocopter.
The ESC Power Dist..
₹430
Brand: FlyRobo
SKU: 1572
Shock Absorber Glass Fiber is suitable for the different open-source CC3D flight controllers, Naze32, Mini APM, or other mini flight control. It absorbs vibration, the center supported plate is ideal for sensitive electronics and cameras. It comes with additional mounting tape.
Features:
Ne..
₹239
