Brand: FlyRobo
SKU: 3101
The 7-pin male JST connector with a 2.54mm pitch is a compact and reliable connector designed for easy integration into electronic circuits. It offers precise pin alignment, durable construction, and versatility for connecting multiple components or devices. The 2.54mm pitch allows for simple insert..
₹2.26 ₹5
Brand: FlyRobo
SKU: 1212
This is a Universal PCB Prototype Board Double-Side 7 X 9 CM High-quality universal prototyping board with standard 0.1″ spacing through holes.
High-quality 7 X 9 CM FR4 material, Double-sided, HASL, NC CNC drilled.
Features:
Dimension: 7 X 9 CM
Base Material FR4
Copper Thickness 1-4..
₹50 ₹89
Brand: FlyRobo
SKU: 2458
7.2V-16V 320A High Voltage ESC Brushed Speed Controller for 540 dual-motor or single motor has 3 operating systems: forward, reverse, and brake fits for various vehicles. It properly disperses heat with the help of a heat sink. It is suitable for a car, the ship model.
Features:
Input volta..
₹2,159
Brand: FlyRobo
SKU: 2392
This is a 70cm 2 Pin Female to Female Dupont Cable, wire generally refers to a connection between two points in an electrical circuit.
It can be used for 3D printers, Arduino boards, and modules.
Features:
Installation and use are simple
Outstanding and in good operating order
Resili..
₹17 ₹23
Brand: FlyRobo
SKU: 2393
This is a 70cm 3 Pin Female to Female Dupont Cable, wire generally refers to a connection between two points in an electrical circuit.
It can be used for 3D printers, Arduino boards, and modules.
Features:
Installation and use are simple
Outstanding and in good operating order
Resili..
₹24 ₹28
Brand: FlyRobo
SKU: 2394
This is a 70cm 4 Pin Female to Female Dupont Cable, wire generally refers to a connection between two points in an electrical circuit.
It can be used for 3D printers, Arduino boards, and modules.
Features:
Installation and use are simple
Outstanding and in good operating order
Resili..
₹35 ₹39
Brand: FlyRobo
SKU: 2401
720 Magnetic Micro Coreless Motor (2CW + 2CCW) for Micro Quadcopters is a very compact and lightweight DC motor. They are rated at 46000 RPM which is more than needed to lift and push your drone to the target. These are less noisy with low resistance. The only drawback of using coreless is the amoun..
₹398 ₹499
Brand: FlyRobo
SKU: 2274
M3 tie rod ends are made for remote-control models including RC boats, helicopters, and robots. It is a DIY spare component that is required. It is constructed of stainless steel and an aluminum alloy, making it sturdy and long-lasting.
Features:-
Materials: stainless steel and aluminum all..
₹189 ₹299
Brand: FlyRobo
SKU: 2560
This is a 73mm Transparent Soft Fan Blade Propeller DIY, the base is made of plastic, and its blades are made of a soft rubber material. It is therefore safer compared to propellers made of hard plastic.
Features:
Aperature: 2mm
It fits a 2mm shaft
Diameter of rotation circle: 73mm
It..
₹14 ₹19
Brand: FlyRobo
SKU: 3736
The 74HC04D is a high-speed CMOS six-way inverter logic control chip housed in an SOP-14 SMD package. It features six independent NOT gates, each capable of inverting input signals with minimal delay. Designed for low power consumption, it operates over a wide voltage range of 2V to 6V, making it su..
₹13 ₹25
Brand: FlyRobo
SKU: 1995
74HC4051 8 Channel Analog Multiplexer Module used for a DIY project. 74HCT4051 is a single-pole octal-throw analog switch (SP8T) suitable for use in analog or digital 8:1 multiplexer/demultiplexer applications.
Features:
Three digital select inputs (S0, S1, and S2), eight independent inputs..
₹64 ₹198
Brand: FlyRobo
SKU: 2066
This is a 2 Digit 0.5inch 7 Segment Digital Tube LED Display Module, each digit controlled by a 74HC595 integrated. It can use the screen with a microcontroller, for example, Arduino. The monitor connects to the microscope using only three signal cables and two power cables. The operating voltage is..
₹90 ₹199
