DIY Portable 12V Battery Energy Storage V3 Spot Welding Machine PCB Circuit Board includes an Electronic Welding Module that is an important part. Spot welding is welded by the principle of rapid local heating and cooling by high current.
The button can switch modes. Each mode corresponds to a different welding time. The LED corresponds to red/green/blue/white/yellow/powder/purple, 7 modes, the shortest red time, and the largest purple welding time. Long press to set the waiting time, the default is 3 seconds, the maximum can be set to 10 seconds
- The product is Portable and Durable that it can easily carry anywhere.
- 3 Cell or 4 cell lipo battery can be directly connected with it.
- High-quality 12 AWG Silicone Wire
- Stable and Reliable.
- It is easy to weld the common 0.1mm~0.15mm nickel-plated sheet.
- It can be used for welding 18650/26650/32650 lipo batteries.
- Output wire with soldering pen is already soldered to the circuit board, and Capacitor is also soldered. It is a ready to use product.
compatible battery to buy:
- 3 Cell 2200Mah Lipo
- 3 Cell 5500Mah Lipo
- You can use any 3 cell or 4 cell lipo / 12 volt car/bike Battery
1 x DIY Portable 12V Battery Energy Storage V3 Spot Welding Machine PCB Circuit Board. ( pre-assembled)
12 - 16.8V
90 - 130A
90 - 150A
Yes, You can claim GST credit if you have a GST number. To do it you have to mention the GST number at the time of checkout. GST option appears in the Billing Address. If you are an existing customer of flyrobo then you can log in to your account ( Account → Address Book → Edit Address) and Then enter your GST number.[ 16/11/2022 ]Was this answer helpful?
Sorry sir, The User manual does not come with it. but sir it does not require a user manual because of its simple connection. you just need to connect the lipo battery with the XT60 connector and you will be able to use it. if you are using other you just need to use the XT60 connector to connect with it.[ 19/07/2022 ]Was this answer helpful?