Menu
Your Cart

Battery Voltage Tester Monitor and Buzzer Alarm

Battery Voltage Tester Monitor and Buzzer Alarm - Other - Multirotor
Battery Voltage Tester Monitor and Buzzer Alarm - Other - Multirotor
Battery Voltage Tester Monitor and Buzzer Alarm - Other - Multirotor
Battery Voltage Tester Monitor and Buzzer Alarm - Other - Multirotor
Battery Voltage Tester Monitor and Buzzer Alarm - Other - Multirotor
Battery Voltage Tester Monitor and Buzzer Alarm - Other - Multirotor
-12 % Out Of Stock
Battery Voltage Tester Monitor and Buzzer Alarm - Other - Multirotor
Battery Voltage Tester Monitor and Buzzer Alarm - Other - Multirotor
Battery Voltage Tester Monitor and Buzzer Alarm - Other - Multirotor
Battery Voltage Tester Monitor and Buzzer Alarm - Other - Multirotor
Battery Voltage Tester Monitor and Buzzer Alarm - Other - Multirotor
Battery Voltage Tester Monitor and Buzzer Alarm - Other - Multirotor

Battery Voltage Tester Monitor and Buzzer Alarm
₹149
₹169

(inc GST)

  • Stock: Out Of Stock
  • With this product you will receive ₹1 FlyRobo Cashback.
  • SKU: FR-02-617

Description:

1. Brand New & High Quality. 
2. Use for 1-8s Lipl/Li-ion/LiMn/Li-Fe.
    Voltage detection pricision: 0.01V.
    Unit voltage display range: 0.5V-4.5V.
    Total voltage display range: 0.5V-36V.
    1S test mode voltage range: 3.7v-30v.
    Low voltage alarm mode for 2-8S.
    Alarm set value range: OFF-2.7V-3.7V.
3. When the voltage is below the set value,it will buzzer with red LED light,pre-set value 3.3V.
4. Push key which can change the voltage settings and save. 
5. Size: 3.9cm x 2.4cm x 0.9cm.
 
 Appliable for: RC Quadcopter, helicopter, multicopter,car,boat and airplane,1S-8S / Lipo / Li-ion / Li Mn / Li-Fe battery.

Features:

-This product is using for detecting 1S-8S lithium battery
-Detect the voltage of each battery core automatically, support reverse connection protection.
-To know the working state of your battery anytime, protect the battery from overcharge and over discharge.
-The red LED will flash,the buzzer will beeping when the voltage is below the set point.
-The factory default setting is 3.3V, press the button to change the voltage setting, and it will save your current setting automatically.

Package Included:

1 x Voltage Buzzer Alarm

 

Questions1 Answers2 | Expand All
Can i get the Battery Voltage data as a digital output ?

Suppose the Voltage tester monitor is fitted on a drone flying far away, in that case i cannot hear buzzer, So can i send the data of this monitor through any digital pins ?

Anchit
  • Dear Sir,

    I completely understand your concern and idea to get the voltage data on the ground station.

    This product is not suitable for your use it will show Voltage on the Built-in display and you can set voltage limit for the buzzer. There are no digital pins on it to get data for other purposes.

    Here is the product which will be helpful in APM and pixhawk flight controller.
    https://www.flyrobo.in/apm_pixhawk_power_module_with_xt60
    You can configure it with a mission planner and get data on the ground station via telemetry.

     

    FlyRobo[ 11/02/2022 ]
    Was this answer helpful?0
When will delivered order?
Ajeet
  • Order will be delivered within 1-3 days in metro city, 3-5 days in other city and 4-7 days in villages or small city. This is the average time of delivery in express shipping. but can change with different locations and different situations.
    FlyRobo[ 16/07/2021 ]
    Was this answer helpful?-297
Showing 1 to 1 of 1 (1 pages)

Write a review

Note: HTML is not translated!
Bad Good

The product is currently Out-of-Stock. Enter your email address below and we will notify you as soon as the product is available.

Name
Email
Phone
Comments