-67 %
Brand: FlyRobo
SKU: 1395
0.4mm Extruder Brass Nozzle Print Head for 3D Printer is a fully functional metal extruder. This backward-compatible is basically a high-end dual extrusion system, using two interchangeable nozzles.
All nozzles in the series are now individually identifiable with markings on the flats of the..
₹16 ₹49
-63 %
Brand: FlyRobo
SKU: 1394
0.5mm Extruder Brass Nozzle Print Head for 3D Printer is a fully functional metal extruder. This backward-compatible is basically a high-end dual extrusion system, using two interchangeable nozzles.
All nozzles in the series are now individually identifiable with markings on the flats of the..
₹18 ₹49
Out Of Stock
Brand: FlyRobo
SKU: 1539
MKS BASE-L is a feature-rich all-in-one electronics solution for Reprap and other CNC devices. It features an onboard ATmega2560. Its five motor outputs are powered by A4982 stepper drivers.
The board can use the same firmware as Ramps1.4. MKS BASE-L is designed to be flexible in user power sour..
₹2,483
Brand: FlyRobo
SKU: 1892
Bondtech Extruder Two Way Feeding Wheel for 3D Printer for 1.75mm filament, Precision custom CNC machined with extreme precision guarantees that you get the grip you always wanted. It is manufactured in hardened steel with a protective surface treatment that will give you a long lifetime and extrem..
₹199
Out Of Stock
Brand: FlyRobo
SKU: 2326
Ultimaker Extruder Two Way Feeding Wheel for 3D Printer for 1.75mm filament, Precision custom CNC machined with extreme precision guarantees that you get the grip you always wanted. It is manufactured in hardened steel with a protective surface treatment that will give you a long lifetime and extrem..
₹107
-38 %
Brand: FlyRobo
SKU: 514
Features:
Fastest response time and high accuracy
Better Stability, as the chip is welded with leads by the alloy soldering process
High resistance and mechanical strength
Small size, lightweight and cheap
Mass production for high accurate element
Operation temperature range: -50 to ..
₹43 ₹69
-39 %
Brand: FlyRobo
SKU: 1782
100k NTC 3950 Thermistor with 2-meter cable and has a DuPont end which is mainly used for 3D printers. The thermistor is a thermally sensitive resistor known for exhibiting a large change in resistance with only a small change in temperature.
Features:
Cable Length: 2 Meter
High resistanc..
₹85 ₹139
-54 %
Out Of Stock
Brand: FlyRobo
SKU: 1557
Due to its temperature tolerance, Kapton Tape is commonly used in 3D printing as a printing surface (applied to a heated build platform) and for insulating hot-ends. When heated Polyimide film adheres particularly well to ABS plastic and can be used to prevent or reduce warping. Kapton tape has been..
₹91 ₹199
-51 %
Brand: FlyRobo
SKU: 1696
Aluminum Flexible Shaft Coupling is lightweight coupling and exhibits more strength in class. This is made up of HE-30 grade aluminum. This type of couplings is very common and found in a wide range of CNC Machines. They can firmly hold the shaft of the motor and other peripherals with the help of G..
₹79 ₹161
-39 %
Brand: FlyRobo
SKU: 1699
Aluminum Flexible Shaft Coupling is lightweight coupling and exhibits more strength in class. This is made up of HE-30 grade aluminum. This type of couplings is very common and found in a wide range of CNC Machines. They can firmly hold the shaft of the motor and other peripherals with the help of G..
₹98 ₹161
-28 %
Out Of Stock
Brand: FlyRobo
SKU: 1762
This Cable Drag Chain Wire Carrier is 10x10mm used to route the wires for CNC Router Machines/ 3D Printers. It comes with an end connector on both ends.
Features:
Material: Nylon
It protects, support, and extend the service life of cables and hoses
Open on both sides, move flexibly, low..
₹324 ₹449
-24 %
Brand: FlyRobo
SKU: 1331
12 V 4010 Cooling Fan is a small but powerful fan. It maintains the temperature of the extruder, which results in good heat dispersion and wonderful performance.
The cooling fan operates on a 12V DC power supply which can be easily powered from the RPI board. It has a 2 pin connector to easily c..
₹75 ₹99
