Menu
Your Cart

2S 4A 7.4V 18650 Lithium Battery Protection Board BMS

2S 4A 7.4V 18650 Lithium Battery Protection Board BMS
2S 4A 7.4V 18650 Lithium Battery Protection Board BMS
2S 4A 7.4V 18650 Lithium Battery Protection Board BMS
2S 4A 7.4V 18650 Lithium Battery Protection Board BMS
2S 4A 7.4V 18650 Lithium Battery Protection Board BMS
2S 4A 7.4V 18650 Lithium Battery Protection Board BMS
2S 4A 7.4V 18650 Lithium Battery Protection Board BMS
₹59

(inc GST)

  • Stock: In Stock
  • SKU: 5165
    10 or more ₹55
    50 or more ₹52

The 2S 4A 7.4V/8.4V Lithium-Ion Battery Protection Board (BMS) is a compact and highly efficient safety module designed for 2-cell 18650 or Lithium-Polymer battery packs. Equipped with a high-accuracy dual-cell protection chip, this board continuously monitors individual cell voltages to prevent overcharging, over-discharging, and overcurrent damage. It serves as an essential safeguard, ensuring the longevity and operational safety of your custom-built battery packs.

This dumbbell-shaped protection board is ideal for space-constrained applications such as DIY power banks, solar lighting systems, RC toys, and portable electronics. It is fully compatible with standard 3.7V nominal (4.2V fully charged) cells, providing a stable 7.4V nominal output. Its small footprint allows it to be soldered directly to the battery terminals and neatly tucked inside heat-shrink tubing, making it a favorite among makers, students, and hardware engineers building IoT devices, Arduino, or ESP32-powered projects.

Features:

  • Dual-Cell Protection: High-precision voltage detection circuitry ensures balanced monitoring of both cells in series.
  • Overcharge Protection: Automatically cuts off charging when cell voltage exceeds safe limits to prevent swelling and hazards.
  • Over-discharge Protection: Prevents cells from dropping below critical voltage levels, preserving battery health.
  • Overcurrent Safeguard: Supports up to 4A continuous discharge current with built-in overcurrent threshold protection.
  • Ultra-Compact Design: Dumbbell-shaped PCB fits perfectly across the ends of two 18650 cells for clean, professional wiring.
  • Low Standby Current: Consumes minimal quiescent current, ensuring your battery pack does not drain during long storage periods.
  • Clearly Labeled Pads: Features robust, easy-to-solder pads for B+ (Battery Positive), B- (Battery Negative), BM (Middle/Balance Point), P+ (Pack Positive/Charge/Discharge), and P- (Pack Negative/Charge/Discharge).

Package Includes:

1 x 2S 4A 7.4V 18650 Lithium Battery Protection Board BMS

Technical
Cell Configuration

2S

Charging Voltage

8.4V

Continuous Discharge Current

4A

Internal Resistance

< 150 mΩ

Nominal Voltage

7.4V

Operating Temperature

-40°C to +50°C

Over current

5A

Over-discharge detection voltage (V)

2.5V ± 0.1V (per cell)

Overcharge detection voltage (V)

4.25V ± 0.05V (per cell)

Be the first to ask a question.

Write a review

Note: HTML is not translated!
Bad Good
Captcha

The product is currently Out-of-Stock. Enter your email address below and we will notify you as soon as the product is available.

Name
Email
Phone
Comments