Menu
Your Cart

Stepper Motor and Drivers

A4950 Dual Motor Driver Module
-59 %
Brand: FlyRobo SKU: 2164
A4950 Dual Motor Driver Module can control the positive and negative rotation of 2 motors. Features: Module with current limit protection 4 PWM pins are required(If you do not need to reverse, only 2 PWM pins are needed). It is much simpler to use than the L298 and provides instructions..
₹163 ₹399
A4988 / DRV8825 Stepper Motor Driver Expansion Board
-54 %
Brand: FlyRobo SKU: 546
Specification: If jumper is hit the position of ON DP, that means 16 segment (4988) or 32 segment (8825)Jm connected motor connect 5v and 9v power supply E, S, D, G, respectively corresponding to the connection of the Enable/Step/Dir/Gnd drive signal output Package included: 1 ..
₹60 ₹130
A4988 Driver Stepper Motor Driver
-45 %
Brand: FlyRobo SKU: 616
The A4988 driver Stepper Motor Driver is a complete micro-stepping motor driver with a built-in converter, easy to operate. It operates from 8 V to 35 V and can deliver up to approximately 1 A per phase without a heat sink or forced air flow (it is rated for 2 A per coil with sufficient additional c..
₹66 ₹120
BTS7960 43A H-Bridge High Power Stepper Motor Driver Module
-44 %
Brand: FlyRobo SKU: 2196
BTS7960 is a high-power H-bridge driver module with thermal over-current protection. It provides a cost-optimized solution for protected high current PWM motor drives with very low board space consumption. BTS7960 circuitry with the 74HC244 chip effectively isolates the microcontroller and the motor..
₹383 ₹689
Brand: FlyRobo SKU: 3018
Introducing a strong and effective way to drive brushless motors in a variety of applications: the DC 9-60V12V48V400W BLDC Three-phase Brushless Motor Controller. This little controller is flexible and adaptable to different systems because it is made to operate with DC power sources that vary from ..
₹1,389
DM542 DSP Digital Stepper Motor Driver
-71 %
Brand: FlyRobo SKU: 2538
DM542 DSP Digital Stepper Motor Driver is an easy-to-use professional stepper motor driver suitable for driving 2-phase and 4-phase hybrid stepping motors. A fully digital stepper driver called the DM542 was created using a cutting-edge DSP control algorithm based on the most recent motion contro..
₹859 ₹2,999
DM556 2-phase Digital Stepper Motor Driver
-34 %
Brand: FlyRobo SKU: 2918
The brains behind precise motion control, the DM556 2-Phase Digital Stepper Motor Driver, is now available. This innovative driver is the perfect option for your stepper motor applications because it is designed to provide optimal performance in a small package. The DM556 2-Phase Digital Stepper ..
₹862 ₹1,298
DRV8825 Stepper Motor Driver with Aluminum Heat Sink
-68 %
Brand: FlyRobo SKU: 224
The DRV8825 stepper motor driver carrier is a breakout board for TI’s DRV8825 micro-stepping bipolar stepper motor driver. The DRV8825 features adjustable current limiting, over-current and over-temperature protection, and six microstep resolutions (down to 1/32-step). It operates from 8.2 – 45 V an..
₹97 ₹299
DRV8833 2 Channel DC Motor Driver Module
-34 %
Brand: FlyRobo SKU: 2087
DRV8833 is a dual H-bridge motor driver IC. It is a deal driver for small motors that run on relatively low voltages. It can be used for bidirectional control of two brushed DC motors at 2.7V to 10.8V. The DRV8833 has built-in current-limiting and no need for externally supplied logic voltage. Fe..
₹65 ₹98
L298N 2-way Dual H-Bridge DC Driver Module
-64 %
Brand: FlyRobo SKU: 1951
L298N 2-way Dual H-Bridge DC Driver Module can drive two DC motors or 4-wire 2-phase stepper motors and achieve forward rotation or reverse rotation. It is possible to adjust the rotation speed. Each can provide a continuous current of 1.5A, peak current can be up to 2.5A, has thermal protection, an..
₹32 ₹89
L298N Dual H Bridge DC Stepper Motor Driver Controller Module
-33 %
Brand: FlyRobo SKU: 2129
L298N based Motor Driver is a high-power motor driver perfect for driving DC Motors and Stepper Motors.  It uses the popular L298N Dual H-Bridge Motor Driver chip and is powerful enough to drive motors from 5-35 Volts at up to 2 Amps per channel. This motor driver is perfect for robotics and mechatr..
₹187 ₹279
L298P 2A Dual Channel DC Motor Driver Shield Module
-39 % Out Of Stock
Brand: FlyRobo SKU: 2607
L298P 2A Dual Channel DC Motor Driver Shield Module is based on the L298, which is a full deck driver designed to drive inductive loads such as relays, solenoids, DC motors, and stepper motors. It allows you to drive two DC motors with your board, controlling the speed and direction of each one inde..
₹978 ₹1,599
Showing 13 to 24 of 39 (4 Pages)

The product is currently Out-of-Stock. Enter your email address below and we will notify you as soon as the product is available.

Name
Email
Phone
Comments