Specification:
Weight: 125 gm(Approx.)
RPM: 1000
Operating Voltage: 12V DC
Gearbox: Attached Metal Gearbox
Shaft diameter: 6mm
Shaft Length: 21 mm
Torque: As per RPM
No-load current = 60 mA(Max)
Load current = 300 mA(Max).
Dimensions: Body Diameter..
Specification:
Weight: 125 gm(Approx.)
RPM: 500
Operating Voltage: 12V DC
Gearbox: Attached Metal Gearbox
Shaft diameter: 6mm
Shaft Length: 21 mm
Torque: As per RPM
No-load current = 60 mA(Max)
Load current = 300 mA(Max).
Dimensions: Body Diameter:..
DC12V24V 800L/H Solar Brushless Motor Water Pump is a centrifugal pump, the pump water flow with the increase of the head decreases. It uses advanced electronic components and a high-quality wear-resistant shaft.
Features:
High efficiency, smooth operation, and long service life.
It is lo..
Double Axis Oblique Speed Reducer can directly install the wheel to make a DIY remote control car.
Features:
Shaft Diameter: 2.5 mm
Axis length: Total length 75mm, single side shaft about 28mm.
You can also use this to make other technical models that require deceleration power units, s..
This is High Torque RF 370 DC Motor, when the power supply is 6V, it is about 10000 revolutions per minute. The no-load current is 0.06A and the locked rotor current is 0.91A.
Features:
Motor Diameter: 24mm
Motor Length: 31mm (excluding shaft)
Motor Shaft Diameter: 2mm
Shaft Length: 7..
This is 12V DC motor which has a gearbox of 45mm diameter. The planetary type gearbox of this motor has a 14:1 gearhead which produces 350 RPM with the torque value of around 78 N-CM.
Features:
Rated Voltage: 12VDC
Rated Torque: 30 kg-cm
Rated Speed: 350 RPM
Body Diameter: 50 mm
Sha..
This is 12V DC motor which has a gearbox of 45mm diameter. The planetary type gearbox of this motor has a metal gears and a center shaft. The Shaft of the motor is loaded with bearing for wear resistance and smooth operation.
Features:
Rated Torque (kg-cm): 21
Stall Torque(kg-cm): 80
Ra..
RS775 12V 3000RPM DC Motor is a high RPM compact size DC Base Motor.
The main application of this motor is to build low RPM; high torque DC motors which are achieved by including gear-box reduction. We can decrease a base motor RPM from 3000 to 1 by just arranging an extra gearbox.
Applicatio..