WCS1700 Hall Current Sensor gives economical and precise solutions for both DC and AC current sensing in industrial, commercial, and communications systems. It has a low-temperature drift linear hall sensor IC with a temperature compensation circuit and diameter of 9.0mm through-hole. The hole will ..
An ESP8266 WiFi-based board with the Arduino layout and a 3.3V operational voltage is called the WeMos D1. The board features more flash memory than an Arduino Uno and is controlled by an ESP8266 chip, a 32-bit processor. It has 1 analog (input) pin and 11 digital I/O pins. A Micro-B USB cable can b..
WH148 100K Ohm 3Pin 15mm Shaft Potentiometer is used for adjusting various parameters like voltage, current, etc in an electronic circuit. This is a three-terminal variable resistor that is used to vary or change the resistance.
It is a 100K ohm 3pin 15mm shaft potentiometer.
Package Includes:..
WH148 10K Ohm 3Pin 15mm Shaft Potentiometer is used for adjusting various parameters like voltage, current, etc in an electronic circuit. This is a three-terminal variable resistor that is used to vary or change the resistance.
It is a 10K ohm 3pin 15mm shaft potentiometer.
Package Includes:
..
WH148 20K Ohm 3Pin 15mm Shaft Potentiometer is used for adjusting various parameters like voltage, current, etc in an electronic circuit. This is a three-terminal variable resistor that is used to vary or change the resistance.
It is a 20K ohm 3pin 15mm shaft potentiometer.
Package Includes:
..
WH148 50K Ohm 3Pin 15mm Shaft Potentiometer is used for adjusting various parameters like voltage, current, etc in an electronic circuit. This is a three-terminal variable resistor that is used to vary or change the resistance.
It is a 50K ohm 3pin 15mm shaft potentiometer.
Package Includes:
..
WH148 5K Ohm 3Pin 15mm Shaft Potentiometer is used for adjusting various parameters like voltage, current, etc in an electronic circuit. This is a three-terminal variable resistor that is used to vary or change the resistance.
It is a 5K ohm 3pin 15mm shaft potentiometer.
Package Includes:
..
This Potentiometer Knob Switch Cap of 6mm easily fits with WH148, Rotary switches used in various electronic devices. The knob makes it very easy to rotate and vary the switch rotation.
Features:
Fits a 6mm splined shaft.
Easy and smooth rotation.
Fast and accurate adjustment.
Note..
This is White Noise Signal Generator DIY Kit, with 2 channel signal output. It includes the common electronic components such as a resistor, capacitor, and potentiometer with DIP soldering mounting to practice your soldering skills
Features:
Easy to assemble
Two-way signal output
Perf..
This is a WIFI 2.4G 4dbi PCB Board Antenna.
Features:
Frequency 2400 ~ 2500 MHz
S.W.R. = 1.0 Kg
Environmental:
Operation Temperature - 40 °C ~ + 65 °C
Storage Temperature - 40 °C ~ + 80 °C
Application:
IEEE 802.11 b/g/n WLAN System
Wireless Communication System
Wi-Fi ..
This is a 2.4Ghz wifi telemetry module that is compatible with the Pixhawk flight controller. This is easy to use and great for the drone user because user dose not required a Ground module if they use this telemetry module because almost every device support 2.4Ghz wifi so that built-in wifi of Mob..
Features:
H-1 FEET L-1/2 FEET W-200 GM Fast cutting action with black oxide finish
Strips and cuts wire 12-24 gauge
Wire Gauge screw in slot holds stripping die to the proper size for repeated jobs and prevent nipped wire
Sharp cutting edges for all industrial uses.
Package Content:..