The MCP3008-I/SL is an 8 channel, 10bit Analogue to Digital (ADC) Converter with SPI interface in 16 pins SOIC package. This ADC combines high performance and low power consumption in a small package by making it as an ideal for embedded control applications. The MCP3008 features successive approxim..
The MCP602-I/SN is a dual CMOS operational amplifier in 8 pin DIP ic package. This low power op amp utilizes an advanced CMOS technology that provides low bias current, high-speed operation, high open loop gain and rail to rail output swing. The common mode input voltage range goes 0.3V below g..
Specifications
40-pin Low Power Microcontroller
Flash Program Memory: 8192 bytes
EEPROM Data Memory: 256 bytes
SRAM Data Memory: 368 bytes
I/O Pins: 33
Timers: Two 8-bit / One 16-bit
A/D Converter: 10-bit Eight Channel
PWM: Two 10-bit Modules
SSP: SPI and I²C Support
USART: Y..
The PIC24FJ64GB002-I/SP is a 28-pin general-purpose Flash Microcontroller with USB On-The-Go (OTG) and nanoWatt XLP technology. The 16-bit low power microcontroller with full-speed USB, 64kB flash memory, 8kB RAM and advanced peripherals. The USB On-The-Go module provides on-chip functionality as a ..
This is MUR3060PT Diode 30A/600V TO-247 used in switching power supply, PWM pulse width modulator, inverter as freewheeling and other electronic circuits, high-frequency rectifier diode.
Features:
Type: MUR3060PT Fast Recovery Diode
Low forward voltage drop
Average Forward Current: 30A..
This is a common 555 timer IC. A classic for all of those first-year circuits projects where you need to blink an LED, generate tone, and thousands of other great beginning projects. Google around for a huge list of resources and example projects.
specification:-
Package/Case ..
The PC817 DIP-4 Transistor Output Optocoupler is a 1-channel 4-pin Transistor Output Photocoupler contains an IRED optically coupled to a phototransistor. It is suitable for programmable controllers and facsimiles.
Features:
10 to 20mA Collector current.
50mA Forward current.
6V Reverse ..
PC817 Opto-Coupler is used to provide electrical isolation between two circuits, one part of the circuit is connected to the IR LED and the other to Photo-transistor. It has a wide range of applications such as noise suppression in switching circuits, I/O isolation for MCUs, etc.
Features:
..
The TIP122 is a Darlington pair NPN transistor. It functions like a normal NPN transistor, but since it has a Darlington pair inside it has a good collector current rating of about 5A and a gain of about 1000. It can also withstand about 100V across its collector- Emitter hence can be used to drive ..
This is TP4056 SOP8 1A Li-Ion Battery Charger IC, which is a constant-current/constant-voltage linear charger for single-cell lithium-ion batteries.
Features:
Model: TP4056
Charge Voltage: 4.2V
TP4056 can work with USB and wall adapters.
Ideally suited for portable applications.
P..
The BC337 is an NPN transistor with a maximum gain of 630, commonly used in low power audio applications. It can also switch loads up to 45V and 800mA hence also used as general purpose transistor.
Pin Configuration :
Pin Number
Pin Name
..