-42 %
Brand: FlyRobo
SKU: 805
Cellmeter-7 v2 is a simple, fast and brilliant way to check the battery voltage, and most importantly, help you determine the condition of your packs within seconds!
This Cellmeter comes with a balance function, it takes the battery voltage in the lowest section as the benchmark to discharge for ..
₹582 ₹999
-69 %
Brand: FlyRobo
SKU: 1084
This is a supermini Solar Lipo charger based on the CN3065 - a single lithium battery charge management chip. This Solar charger provides you with the ability to get the most possible power out of your solar panel or other photovoltaic device and into a rechargeable LiPo battery. Set-up is easy as w..
₹91 ₹289
-38 %
Brand: FlyRobo
SKU: 3361
The CR2032 Battery Seat Welding DIP Positive Shrapnel is a compact and durable holder designed for 3V CR2032 lithium coin cell batteries. It features a DIP (Dual In-line Package) design for easy PCB mounting and reliable battery connection. The positive shrapnel ensures firm contact with the battery..
₹5 ₹8
-56 %
Brand: FlyRobo
SKU: 2046
This is a single-cell battery holder - which Mounts Directly on PCB. This space-saving design allows components to be placed under the holder. This is ideal when board space is more important than board height.
Features:
Small Size and easy to carry.
It is very easy to install and use.
..
₹4 ₹9
-74 %
Brand: FlyRobo
SKU: 2080
Dual Micro USB 3.7V to 5V 2A Power Bank 18650 Lipo Charger with LED lights to show the power, non-working state of intelligent automatic shutdown. It has built-in lithium battery protection IC, over-current, overvoltage, under-voltage protection.
Features:
Dual USB output ports.
4-level L..
₹64 ₹245
-27 %
Brand: FlyRobo
SKU: 2123
This Battery Power Supply Boost Module was designed for AAA battery, flip the power switch, and you will have a 5V supply to power your LilyPad circuit. This board has AAA battery clips but can use an input from 1.2V to 5V.
Features:
Type of batteries connectable: AAA
Input: 1.2v – 5v w..
₹174 ₹239
Brand: FlyRobo
SKU: 3912
The LilyPad CR2032 Coin Cell Battery Holder Module is designed to power wearable electronics using a 3V CR2032 coin cell battery. It features a sleek, sewable design that integrates easily with e-textile projects. The module has large conductive pads for easy stitching with conductive thread. It sec..
₹15
Brand: Nippo
SKU: 252
Features:-
Model Number: 9V 6F 22.
Battery Type: Zinc Carbon.
Size: 6F22 006P.
Jacket: Metal.
Single Battery Dimensions (mm): L- 26. 5, H - 48. 5, W - 17. 5 (Max).
Nominal Voltage(V) :9V.
Discharge Resistance(Ω): 620.
Cut-off Voltage(V): 5.4.
specifi..
₹60
Out Of Stock
Brand: FlyRobo
SKU: 1323
TOMO V6-2 Dual Slots USB Battery Charger is for rechargeable batteries that are Extremely environmentally friendly and energy-saving, our battery charger is great for daily use. With special design, it can be applied to emergency charging for batteries. It features a dual-slot for charging two batte..
₹484
-82 %
Brand: FlyRobo
SKU: 720
TP4056 1A Li-Ion Battery Charger with Current Protection is a tiny module, perfect for charging single cell 3.7V 1 A or higher lithium-ion (Li-Ion) cells such as 16550s that don’t have their own protection circuit. Based on the TP4056 charger IC and DW01 battery protection IC this module will offer ..
₹14 ₹79
Brand: FlyRobo
SKU: 1054
The TP4056 1A Li-Ion Lithium Battery Charging Module – Mini B USB is a 3.7V lithium battery charger module that has an onboard Mini USB interface. With Mini-USB onboard connector, you can directly connect to the computer USB port for battery charging. If USB is not available you can use an external ..
₹42
-6 %
Brand: FlyRobo
SKU: 2157
TP5000 Battery Charging Module with support for Lithium-Ion and Lithium Phosphate Batteries, and works with 4.2V as well as 3.6V Battery. It is based on the TP5000 Battery Charging IC, which charges a lithium battery with a current of up to 1A. It comes with a dual-color LED, to check the status of ..
₹103 ₹109
