Brand: FlyRobo
Model: FR-06-366
Tensioner Torsion Spring helps you keep the required tension in your GT2 belt to ensure the best quality prints every time. It is made of metal, high-quality Timing Belt Tensioner Springs.
It is suitable for the popularly 6mm GT2 Belt. This spring tensioner will increase belt tension and reduce b..
₹15
Brand: FlyRobo
Model: FR-05-248
The TF Thermal Fuse RY-192°C 10A 250V is a reliable safety component designed to protect electrical circuits from overheating. With a current rating of 10A and voltage tolerance up to 250V, it ensures robust performance in diverse applications.
Its compact size makes it easy to integrate into var..
₹12
Brand: FlyRobo
Model: FR-06-200
he GT2 series of belts are designed specifically for linear motion. They use a rounded tooth profile, with 2mm pitch, that guarantees that the belt tooth fits smoothly and accurately in the pulley groove, so when you reverse the pulley direction, there is no room for the belt to move in the groove.
..
₹119
Brand: FlyRobo
Model: FR-06-439
Titan E3D 1.75mm Extruder Kit works perfectly with your installed E3D hotend, and will allow users to upgrade their 3D printer's entire extrusion system.
Features:
Type: V6 Bowden Extruder
High-quality Titan extruder
Very easy to upgrade your printer.
Suitable use for Remote and Short..
₹759
-22 %
Brand: FlyRobo
Model: FR-06-418
TL-Smoother V1.0 is an addon module for 3D printer stepper motor drivers. It provides flyback diodes for the motor outputs so that they are also protected against induction voltages in the unpowered state of the driver. It can eliminate the uneven signal wave at low speed so as to achieve the effect..
₹108 ₹139
-72 %
Brand: FlyRobo
Model: FR-06-500
TMC2208 Stepper Motor Driver Module is single-axis stepping motor driver chip, power tube built-in drive current 1.4A peak current 2A, 256 subdivision, UART configuration interface.
Features:
StealthChop2 – faster motor acceleration/deceleration than stealth chip
Automatic stealth chip an..
₹239 ₹849
Brand: FlyRobo
Model: FR-06-124
The TPU Bondtech BMG Deceleration Double Gear Extruder is a state-of-the-art option for 3D printing enthusiasts looking for dependability and accuracy. This extruder was designed with innovation in mind and features a special double-gear design that guarantees unmatched filament control and seamless..
₹859
Brand: FlyRobo
Model: FR-06-204
Transparent Openbuilds 5mm V-shaped Pulley for 3D Printer, it adopts motor-grade bearing, which is rust-proof, wear-resistant, and friction-resistant, and runs smoothly and without noise.
Features:
Model: V-type pulley
Bearing: 625zz bearing
Colour:Transparent+silver
Outside Diameter:..
₹119
Brand: FlyRobo
Model: FR-06-383
POM Wheel Pulley with Double Bearing is produced by high-precision automatic lathe machining, with machining error within 0.005mm. This pulley bearing adopts motor-grade bearing, which is rust-proof, wear-resistant and friction-resistant, and runs smoothly and without noise.
Features:
Mate..
₹99
Out Of Stock
Brand: WANHAO
Model: FR-06-309
ABS stands for Acrylonitrile Butadiene Styrene, which is a multipurpose material commonly used in 3D printing. ABS is the same material that Lego bricks are made out of and is a great plastic for working parts. Final products made with ABS are very durable, withstand a wide range of temperatures, an..
₹1,199
Out Of Stock
Brand: WANHAO
Model: FR-06-304
Description:
PLA stands for Polylactic Acid. This is the most widely used material for 3d printing, mainly due to 2 reasons
Low Warp
Odourless
PLA has a wide range of applications and is the most commonly used 3D Printing Filament for Desktop 3D Printers.
PLA is the 2nd highest co..
₹1,349
Out Of Stock
Brand: WANHAO
Model: FR-06-301
Description:
PLA stands for Polylactic Acid. This is the most widely used material for 3d printing, mainly due to 2 reasons
Low Warp
Odourless
PLA has a wide range of applications and is the most commonly used 3D Printing Filament for Desktop 3D Printers.
PLA is the 2nd highest co..
₹1,349
