-52 %
Brand: FlyRobo
Model: FR-06-362
100k NTC 3950 Thermistor with 2-meter cable and has a DuPont end which is mainly used for 3D printers. The thermistor is a thermally sensitive resistor known for exhibiting a large change in resistance with only a small change in temperature.Features:Cable Length: 2 MeterHigh resistance and mechanic..
₹67 ₹139
-45 %
Brand: FlyRobo
Model: FR-06-213
Features:
Fastest response time and high accuracy
Better Stability, as the chip is welded with leads by the alloy soldering process
High resistance and mechanical strength
Small size, lightweight and cheap
Mass production for high accurate element
Operation temperature range: -50 to ..
₹38 ₹69
-58 %
Out Of Stock
Brand: FlyRobo
Model: FR-06-259
Due to its temperature tolerance, Kapton Tape is commonly used in 3D printing as a printing surface (applied to a heated build platform) and for insulating hot-ends. When heated Polyimide film adheres particularly well to ABS plastic and can be used to prevent or reduce warping. Kapton tape has been..
₹84 ₹199
Brand: FlyRobo
Model: FR-06-279
Aluminum Flexible Shaft Coupling is lightweight coupling and exhibits more strength in class. This is made up of HE-30 grade aluminum. This type of couplings is very common and found in a wide range of CNC Machines. They can firmly hold the shaft of the motor and other peripherals with the help of G..
₹149
Brand: FlyRobo
Model: FR-06-282
Aluminum Flexible Shaft Coupling is lightweight coupling and exhibits more strength in class. This is made up of HE-30 grade aluminum. This type of couplings is very common and found in a wide range of CNC Machines. They can firmly hold the shaft of the motor and other peripherals with the help of G..
₹149
-24 %
Out Of Stock
Brand: FlyRobo
Model: FR-06-345
This Cable Drag Chain Wire Carrier is 10x10mm used to route the wires for CNC Router Machines/ 3D Printers. It comes with an end connector on both ends.
Features:
Material: Nylon
It protects, support, and extend the service life of cables and hoses
Open on both sides, move flexibly, low..
₹340 ₹449
-43 %
Out Of Stock
Brand: FlyRobo
Model: FR-06-602
12 V 4010 Cooling Fan is a small but powerful fan. It maintains the temperature of the extruder, which results in good heat dispersion and wonderful performance.
The cooling fan operates on a 12V DC power supply which can be easily powered from the RPI board. It has a 2 pin connector to easily c..
₹56 ₹99
-14 %
Out Of Stock
Brand: FlyRobo
Model: FR-06-601
12 V 6010 Cooling Fan is a small but powerful fan. It maintains the temperature of the extruder, which results in good heat dispersion and wonderful performance.
The cooling fan operates on a 12V DC power supply which can be easily powered from the RPI board. It has a 2 pin connector to easily c..
₹85 ₹99
Out Of Stock
Brand: FlyRobo
Model: FR-06-402
12V 10A Industrial power supply with Aluminium casing, High quality. Best suitable for CNC Machines and 3D printers. From Flyrobo.in, You will get best quality and most efficient industrial SMPS ( Industrial power supply).
Features:
High efficiency
Low temperature
LED indicator for ..
₹789
Out Of Stock
Brand: FlyRobo
Model: FR-06-405
The 12V/1A SMPS Power Adaptor (Power supply) is a Switched-mode power supply (SMPS). This is the advanced power supply and better than conventional ones. If you want low losses and stable output also you don’t want to make a rectifier, so go for SMPS.Features:Input Voltage range : 110~ 240VACInput ..
₹199
-20 %
Out Of Stock
Brand: FlyRobo
Model: FR-06-604
12V 3010 Cooling Fan is a small but powerful fan. It maintains the temperature of the extruder, which results in good heat dispersion and wonderful performance.
The cooling fan operates on a 12V DC power supply which can be easily powered from the RPI board. It has a 2 pin connector to easily co..
₹79 ₹99
-27 %
Brand: FlyRobo
Model: FR-06-215
The 12v 40W Ceramic Cartridge Heater is a powerful little beast of a heater. Get rid of fragile and poor tolerance enamel resistors and switch to a purpose made high power ceramic heater cartridge.
Features :
Works on many 3D printers, including RepRap and Prusa models.
It fits nicely in ..
₹98 ₹135
