Brand: FlyRobo
SKU: 940
Worm gears are used when large gear reductions are needed. It is common for worm gears to have reductions of 20:1, and even up to 300:1 or greater.
Features:
Pitch Diameter=40 mm.
Length=32mm.
Center Shaft Diameter=6 mm.
Applications:
Gate control mechanisms.
Hoisting ..
₹36
-12 %
Brand: FlyRobo
SKU: 2700
This is WS2812 RGB LED Controller Adapter Module for ESP8266 ESP-01. You can make a colorful display project for Arduino IDE.
Features:
Interface: 3Pin connector.
Support 3.7V lithium battery.
It is based on ESP-01/ ESP-01S.
It supports Arduino IDE programming.
Package includes:
..
₹96 ₹109
-4 %
Brand: FlyRobo
SKU: 3181
The RGB 4 Pin LED Driver Module | WS2812B is a compact and efficient solution for driving RGB LEDs. It utilizes the WS2812B integrated circuit, which combines control and RGB output in a single package, enabling easy control of multiple LEDs with minimal wiring. The module supports cascading, allowi..
₹23 ₹24
Brand: FlyRobo
SKU: 2681
This is WXD3-13-2W 10K ohm Precision Potentiometer, widely used to adjust the timer, speed, and temperature.
Features:
Model: WXD3-13-2W
Small size, easy to carry
Provide full protection from dust, shock, scratches and bumps, and other daily damage.
Package Includes:
1 x WXD3-13..
₹204
-23 %
Brand: FlyRobo
SKU: 2632
This is WXD3-13-2W 4.7K ohm Precision Potentiometer, widely used to adjust the timer, speed, and temperature.
Features:
Model: WXD3-13-2W
Small size, easy to carry
Provide full protection from dust, shock, scratches and bumps, and other daily damage.
Package Includes:
1 x WXD3-1..
₹154 ₹199
-31 %
Brand: FlyRobo
SKU: 3171
The 47k ohm Precision Potentiometer WXD3-13-2W is a high-quality, adjustable resistor designed for precise control in electronic circuits. It features a resistance range of 47k ohms with a tolerance for fine-tuning applications. This potentiometer supports a power rating of 2 watts, making it suitab..
₹145 ₹209
-44 %
Brand: FlyRobo
SKU: 2433
WZ3605E 80W 5A Adjustable Buck Boost Power Supply Module is a high-definition color screen display that is clear and intuitive, using a 1.44-inch high-definition color screen LCD display, and the content is displayed on multiple screens. The output voltage is adjustable from 0.6-36.00V, and the outp..
₹2,238 ₹3,999
-0 %
Out Of Stock
Brand: FlyRobo
SKU: 1992
X9C103S DC 3-5V Digital Potentiometer Board Module for Arduino consists of a resistor array, wiper switches, a control section, and non-volatile memory. The wiper position is controlled by a three-wire interface. These are digitally controlled (XDCP) potentiometers.
The potentiometer is implemen..
₹228 ₹229
Out Of Stock
Brand: FlyRobo
SKU: 1047
The X9C104 digital potentiometer module helps you simulate the mechanical control of a potentiometer. The integrated circuit contains 99 series-related resistors. With a microcontroller, you can control the module and select the place where the center pin of the "potentiometer" is connected, anywher..
₹431
-29 %
Brand: FlyRobo
SKU: 3418
The XBee/Bluetooth Bee USB Adapter Module is designed to provide seamless communication between a computer and XBee or Bluetooth Bee modules. It features a USB interface, allowing easy connection to devices for wireless data transmission. With plug-and-play functionality, this adapter simplifies con..
₹178 ₹249
-60 %
Brand: FlyRobo
SKU: 1961
The XBee Shield V03 Module allows wireless communication between Arduino over a modified ZigBee protocol using Xbee Module. The shield is ready to use, plug n play, without the Xbee Module. The shield can be directly put on top of Arduino Uno. It works with all Xbee Module i.e. Series 1 and Series 2..
₹139 ₹349
-53 %
Out Of Stock
Brand: FlyRobo
SKU: 1100
This is a simple to use, RS232 to the serial base unit for the XBee line of products. This unit works with all XBee modules including the Series 1 and Series 2.5, standard and Pro version. Plug the unit into the XBee Explorer, attach an RS232 cable, attach a USB cable to power the board and you will..
₹163 ₹349
