5V to 3.3V TTL Bi-directional Logic Level Converter Module. 2 channels of high-voltage logic and low-voltage logic bilateral switching, 2-channel of high-voltage logic switch low voltage logic into unitary transformation. This Module is compatible with the breadboard, it can be put on the breadboard..
This module is 4 Channel devices (great for I2C or SPI) and will work with all microcontrollers, Arduino, Raspberry Pi, Intel Edison, NXP Mbed. If you've ever tried to connect a 3.3V device to a 5V system, you know what a challenge it can be bi-directional logic level converter is a small device tha..
This 5mp camera module is capable of 1080p video and still images and connects directly to your Raspberry Pi. Connect the included ribbon cable to the CSI (Camera Serial Interface) port on your Raspberry Pi, boot up the latest version of Raspbian and you are good to go.The board itself is tiny, at a..
The Acrylic Adjustable Camera Mount Module for Raspberry Pi is an adjustable mount setup for the Raspberry Pi camera. These are cut out of the acrylic sheet.Raspberry Pi Camera Module Mount is a great accessory for Pi shutterbugs. The Pi camera can be attached using little screws, also the design al..
SpecificationBluetooth V2.0 Class 1 (class 1 is manufacturer rated)Maximum wireless distance: 100 meters (as per Bluetooth class 1 standard)Supports native Windows Bluetooth stack (Windows XP and Vista)Plug and playApplicationThis supermini Bluetooth 2.0 adapter dongle is very useful to convert the ..
This cable will let you swap out the stock 300mm long flex cable from a Raspberry Pi Camera (either 'classic' or 'NoIR' type) for a different size. Works great, just carefully open the connector on the Pi and slip this one in.Features:Length: 150mm (6″)Width: 16mm (0.6″)Poles: 15Package Content:1 x ..
This is the additional focus that can be added to your night vision surveillance camera project using Raspberry Pi. The Night Vision Sensitive Infrared Light 3W for Raspberry Pi Camera features the Onboard photoresistor for the ambient light detection. Also, the Onboard adjustable resistor controls ..
This Transparent case designed for the Raspberry Pi 2 B and Model B+(B Plus) to give you maximum use of the Raspberry Pi, it provides openings for all the connectors( 3.5mm Audio / Micro USB Power / HDMI Video / Ethernet/ 40 Pin GPIO/ DSI/ USB ports) and comes with four screws that will keep the cas..
Overview:The Raspberry Pi 3 Model B+ is 64-bit quad core processor running at 1.4GHz, dual-band 2.4GHz and 5GHz wireless LAN, Bluetooth 4.2/BLE, faster Ethernet, and PoE capability via a separate PoE HAT.
The dual-band wireless LAN comes with modular compliance certification..
The official red and white enclosure from the Raspberry Pi foundation, specially designed for the Raspberry Pi 3 Model B and Model B+. The versatile design is simple to assemble and allows easy access to all the Raspberry Pi ports and controls without leaving it unprotected.The optional clip-on lid ..
Raspberry Pi 4 Case is made of strong ABS plastic material with a Red-White combination and meticulously designed for Pi 4. It will provide adequate protection for your Pi and access to all the ports. This case comes with a Raspberry LOGO engraved on the white top of the cover and Rubber pads a..
This product’s key features include a high-performance 64-bit quad-core processor, dual-display support at resolutions up to 4K via a pair of micro-HDMI ports, hardware video decode at up to 4Kp60, 1 GB RAM, dual-band 2.4/5.0 GHz wireless LAN, Bluetooth 5.0, Gigabit Ethernet, USB 3.0, and PoE capabi..