Search Criteria
Products meeting the search criteria
-46 %
Out Of Stock
Brand: FlyRobo
Model: FR-04-524
The XD-216 Screw Shield Expansion Board can be plugged into the Arduino controller. You can use this shield to save yourself from a bad port connection. Feel secure with this Arduino-compatible screw shield.
Both sides of the shield are broken out to the side of the Arduino, to allow access to ev..
₹269 ₹499
-54 %
Brand: FlyRobo
Model: FR-04-511
Specification:
If jumper is hit the position of ON DP, that means 16 segment (4988) or 32 segment (8825)Jm connected motor
connect 5v and 9v power supply
E, S, D, G, respectively corresponding to the connection of the Enable/Step/Dir/Gnd drive signal output
Package included:
1 ..
₹60 ₹130
-64 %
Brand: FlyRobo
Model: FR-01-511
IO Expansion Shield For Arduino Nano is specifically designed to facilitate an easy connection between Expansion Shield For Arduino Nano and many other devices. In essence, it expands for the Arduino Nano controller to link those devices in a simple and trouble-free manner.it will be the Nano all pi..
₹89 ₹249
-37 %
Brand: FlyRobo
Model: FR-01-526
The Arduino Ethernet Shield allows an Arduino or Arduino compatible board to connect to the internet. It is based on the Wiznet W5100 ethernet chip providing a network (IP) stack capable of both TCP and UDP. It supports up to four simultaneous socket connections. Use the Ethernet library to write sk..
₹886 ₹1,399
-39 %
Brand: FlyRobo
Model: FR-06-219
This expansion board as a driver expansion board can be used for laser engraving machines, 3D printers, CNC. It is a total of four slots, can drive four A4988 stepper motor. Each road stepper motors only need two IO ports. In other words, six IO ports can be well managed three stepper motors.
The..
₹116 ₹189
-70 %
Brand: FlyRobo
Model: FR-01-473
The CJMCU TCA9548A I2C 8 multi-channel expansion board enables communication with multiple I2C devices that have the same address that makes it simple to interface with. Using this you can get up to 8 same-address I2C devices hooked up to one microcontroller - this multiplexer acts as a gatekeeper, ..
₹87 ₹289
-37 %
Brand: FlyRobo
Model: FR-01-448
Nano IO Expansion Shield for Arduino NANO 328P breaks out all pins as an Electronic brick 3pin interface and an nRF24L01 wireless interface. This extension plate provides all IO leads to 328P for the Arduino Nano.
Features:
All digital and analog pins breakout
Provide the external power i..
₹181 ₹289
-56 %
Out of Stock
(Restock: 15-07-2025 to 19-07-2025)
(Restock: 15-07-2025 to 19-07-2025)
Brand: FlyRobo
Model: FR-01-454
The XBee Shield V03 Module allows wireless communication between Arduino over a modified ZigBee protocol using Xbee Module. The shield is ready to use, plug n play, without the Xbee Module. The shield can be directly put on top of Arduino Uno. It works with all Xbee Module i.e. Series 1 and Series 2..
₹155 ₹349
Brand: FlyRobo
Model: FR-01-418
The Screw Shields V2 Terminal Expansion Board is an essential accessory for Arduino projects, offering convenient terminal connections for easy wiring. With its compact design, it fits seamlessly onto Arduino boards, providing secure screw terminals for each pin. This shield facilitates quick protot..
₹219
Showing 1 to 9 of 9 (1 Pages)
