Brand: FlyRobo
Model: FR-01-276
This is Banana Plug to Test Hook Clip for attaching a multimeter to a breadboard circuit, handy for checking circuits in experimental designs. It is very easy to connect a universal digital multimeter standard jack, ideal for use in labs, service shops, schools, homes, and industry.
Features:
..
₹199
Brand: FlyRobo
Model: FR-01-438
Features:-
10CH Quality Test Saleae 24M Hook Clip Logic Analyzer Test Folder is a 10 point Dupont folder cable with Hook Clip for attaching and locking.
It has a simple press and lock mechanism.
Each wire has a clip on one end to make it simple and safe to clip and unclip the test points ..
₹199 ₹239
Brand: FlyRobo
Model: FR-01-972
Sliding Adjustable Potentiometer Module 10k is an electronic slider potentiometer module which is adjustable or compatible with Arduino / Raspberry Pi for all your DIY needs. This is a sliding type potentiometer whose resistance can adjustable with the help of the slider switch.
Features:
..
₹199 ₹249
Brand: FlyRobo
Model: FR-01-265
This is a 11x11x5mm Universal Aluminum Silver Heat Sink. A heat sink is designed to maximize its surface area in contact with the cooling medium surrounding it, such as the air. A heat sink transfers thermal energy from a higher-temperature device to a lower-temperature fluid medium.
Features:
..
₹13
Brand: FlyRobo
Model: FR-06-601
12 V 6010 Cooling Fan is a small but powerful fan. It maintains the temperature of the extruder, which results in good heat dispersion and wonderful performance.
The cooling fan operates on a 12V DC power supply which can be easily powered from the RPI board. It has a 2 pin connector to easily c..
₹82 ₹99
Brand: FlyRobo
Model: FR-01-298
This is 150W DC12V AC220V Battery Booster Inverter Module, that transforms voltage from DC 12V to AC 110V 220V.
Features:
Power:150W
Output waveform: high-frequency square wave
High-quality PCB board, Easy to use.
It is mainly used for electronic DIY work before the inverter stage.
..
₹699
Brand: FlyRobo
Model: FR-01-203
1800W 40A DC to DC Adjustable Constant Voltage and Current Power Supply Module with high power and stable output converts 10-60VDC to 12-97V DC. It ensures high conversion efficiency, up to 97%.
It is designed with a smart temperature control fan, which will automatically work when the temperatu..
₹2,143 ₹2,799
Brand: FlyRobo
Model: FR-01-521
The 18650 Battery Shield holds single-cell lithium-Ion 18650 form factor batteries which should have integrated battery protection circuits. The boost circuit maintains the voltage to the Pi at 5.1V for battery voltages of 3.7V to 4.2V. The jumper allows you to disable power to the Pi and Isolate th..
₹349
Brand: FlyRobo
Model: FR-01-212
This is an 18mm x 13mm x 6mm (LxWxH) Aluminum Heatsink which can be used for multipurpose applications. The aluminum heat sink reduces the risk of hardware failure because of overheating.
Features:
It absorbs heat quickly.
This heatsink with Thermal conductive double-sided tape, which is ..
₹69
Brand: FlyRobo
Model: FR-01-251
1Hz-50MHz Crystal Oscillator Frequency Counter Meter DIY Kit is a frequency meter based on PIC single chip microcomputer, with a crystal vibration measurement function and programmable frequency setting of addition and subtraction, five digits tube display, convenient and intuitive, all use in-line ..
₹569
Brand: FlyRobo
Model: FR-01-240
2.13 Inch E-Paper Flexible Ink Screen LCD Module is suitable for Ardunio/STM32. It uses the "microcapsule electrophoresis display" technology for image display.
Features:
Three-Color Display: Black, White, Red
MH-ET Live: Waveshare 3 color display equivalent
Low Power Consumption
It ..
₹1,699 ₹2,100
Brand: FlyRobo
Model: FR-01-241
2.13 Inch E-Paper Flexible Ink Screen LCD Module is suitable for Ardunio/STM32. It uses the "microcapsule electrophoresis display" technology for image display.
Features:
Two-Color Display: Black and White
Low Power Consumption
It has a wide viewing angle
Used for display of electron..
₹1,699 ₹2,100