Brand: FlyRobo
Model: FR-07-082
Nickel Strip is best suitable for spot welding in the 18650 Lithium-Ion battery pack. Nickle Strip is generally useful in the welding of battery points together to connect the batteries in combinations.
These Nickel strips are popular because of their good performance while soldering as it gets s..
₹49
Brand: FlyRobo
Model: FR-07-832
Nickel Strip is best suitable for spot welding in the 18650 Lithium-Ion battery pack. Nickle Strip is generally useful in the welding of battery points together to connect the batteries in combinations.
These Nickel strips are popular because of their good performance while soldering as it gets s..
₹49
-73 %
Brand: FlyRobo
Model: FR-07-407
Lithium-Ion charge protection circuit comes with over-charge, over-discharge, over-current and short circuit protection. MOS transistor can control the battery charge and discharge, Built-in three-stage over-current detection circuit, for a variety of various shapes 3.7 V lithium-Ion batteries.1S 3A..
₹49 ₹179
Out Of Stock
Brand: FlyRobo
Model: FR-01-370
Features:-
2 Gl High performance and stability, ability to work fluidly
High quality for usage by professionals
Nice accessories to update your remote-controlled boat and significantly raise its performance
It is a great replacement for a damaged or outdated one thanks to its reasonable ..
₹599
Brand: FlyRobo
Model: FR-07-455
This is 2 x 1.5V AAA Battery Holder can hold 2 batteries of 1.5V AA which can make a 3.0 V rechargeable battery pack from NiMH / NiCd cells. The battery holder puts the batteries in series so that you have 2 x the voltage of an AA battery.
Features:
Battery type: AAA
The wire length is A..
₹24
Brand: FlyRobo
Model: FR-07-436
Battery Back to Back Holder Case is suitable for 2 x AA batteries, and it comes with a holder with wires. It has a spring clip design so you can easily put the battery in it.Features:The wire is Approx 140mmIt is lightweightIt is very convenient to carry.It is suitable for 2 x AA batteries.Package I..
₹24
Out Of Stock
Brand: Zop Power
Model: FR-02-317
This 3-cell Zop Power lipo battery with 2200mah of capacity and 35C of discharge rate comes with XT60 Connector. This lipo battery is compatible with all types of DIY drones or Multi-Rotor.
Features:
Battery parameter: Zop Power 11.1V 2200MAH 35C
Capacity: 2200mah
Continuous Discharge..
₹1,499
Out Of Stock
Brand: FlyRobo
Model: FR-07-423
26650 3.2V 3200MAH Battery gives value for your money. It is a single cell, compact, and powerful battery cell with a 3200 mAh capacity. It is very convenient to install in your project to fulfill a 3.2 Volt requirement with high capacity.
The Lithium Iron Phosphate Battery (LiFePO4 battery) or L..
₹299
Out Of Stock
Brand: FlyRobo
Model: FR-07-422
26650 3.2V 3200MAH Battery gives value for your money. It is a single cell, compact, and powerful battery cell with a 3200 mAh capacity. It is very convenient to install in your project to fulfill a 3.2 Volt requirement with high capacity.The Lithium Iron Phosphate Battery (LiFePO4 battery) or LFP b..
₹399
Brand: FlyRobo
Model: FR-02-582
2mm Gold Plated Bullet Connector is made up of copper for good conductivity and Gold Plated for long life and avoid oxidation. The pair has a flexible connector that firmly fits together to avoid loose connections. It is widely used in RC applications.
Features:
Material: Copper (Gold Plate..
₹25
Brand: FlyRobo
Model: FR-07-461
This is a BMS with a 10A current and 7.4V-8.4V voltage rating to charge 2 cells of Li-ion cells. Two batteries (18650) can be connected simultaneously to the HX-2S-D01 charge-discharge controller module. The module has protection against short circuits, overcharges, and over-discharges.
Features:..
₹139
-33 %
Brand: FlyRobo
Model: FR-07-433
This is a BMS with a 20A current and 8.4-9V voltage rating to charge 2 cells of Li-ion cells. Two batteries (18650) can be connected simultaneously to the HX-2S-D20 charge-discharge controller module. The module has protection against short circuits, overcharge,s and over-discharge.
Features:
..
₹106 ₹158
